Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #250602048

Range of stainless steel braided EPDM lined flexible hose assemblies with EPDM seals & EPDM washers, available with a variety of end connections. For use with copper pipe manufactured to EN1057 & HEP20 PB pipe. Maximum working pressure; 6 Bar Maximum operating temperature; 65°c

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250602048
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below. PF = Pushfit
Marking:: On cap: Wavin, Hep20. Collor: BS7291, Size, and KEYLESS. On ferule: DOM (YYYY) GCE and WRAS
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 3093476 KL425A-15 15mm PF X ½ BSP (F) 3093488 KL125A-15 15mm PF X ½ BSP (F) 3093567 KL125B-15 15mm PF X 3/4 BSP (F) 3093484 KL125C-22 22mm PF X ¾ BSP (F) 3093477 KL125B-22 22mm PF X ¾ BSP (F) 3093487 KL225A-15 15mm PF X ½ BSP (F) 3093478 KL225B-15 15mm PF X 3/4 BSP (F) 3093515 KL225C-22 22mm PF X ¾ BSP (F) 3093512 KL225B-22 22mm PF X ¾ BSP (F) 3093493 KL325A-15 15mm PF X ½ BSP (F) 3093583 KL325B-22 22mm PF X ¾ BSP (F) 3093586 KL125H-15 15mm PF 3093579 KL125H-22 22mm PF 3093601 KL225H-15 15mm PF 3093518 KL225H-22 22mm PF 3093593 KL125D-15 15mm PF X ½ BSP (F) 3093501 KL125F-15 15mm PF M10 threaded 3093496 KL125G-15 15mm PF M12 threaded

Manufacturer:: Wavin Ltd.

Company Name
Wavin Ltd.
Address
Edlington Lane, Edlington Doncaster
Postcode
DN12 1BY
Country
United Kingdom
Phone
01709 856300

View All Listings by this Company

WRAS Approval Number: #250102068

Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. Some models incorporate isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250102068
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Plumb Bliss logo, Wras and date of manufacture (YYYY).
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: SD-DD-01 (Stainless-steel braided – no sheath): Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. Size: DN10 - F1/2, F3/4, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. Size: DN13 - F1/2, F3/4, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. SD-DD-02 (Nylon braided – no sheath) Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-03 (stainless-steel braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-04 (nylon braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25 M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1

Approval Holder:: Bliss UK Group Ltd

Company Name
Bliss UK Group Ltd
Address
Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire
Postcode
MK43 8TS
Country
United Kingdom
Phone
01234 860230
General Email
accounts@blissukgroup.co.uk

View All Listings by this Company

WRAS Approval Number: #250715010

Range of nylon braided flexible outlet hoses, incorporating an EPDM liner, EPDM ‘O’-rings and gaskets. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250715010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only.
Size:: End connections: 01 & 03: ½” BSP (F) captive nut. 02 & 04: ⅜” BSP (F) captive nut. 05: M15x1. 06: hose 11.2mm quick plug + loose quick connect to M15x1. 07: F15x1 captive nut.
Marking:: All connections: Kind, WRAS and date of manufacture (YYYYMM) on sleeve or ferrule. Connections 01 & 03: Also have Kind on captive nut.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: JD-PN***-**-**** Where: *** denotes the hose length: 15-300cm: E.g., 015 = 15cm, 100 = 100cm, 200 = 200cm. ** denotes the hose size: 06 = DN6, 07 = DN7. **** denotes the connections, and can be replaced with any of the following: 01 = F1/2, 02 = F3/8, 03 = Cardan F1/2, 04 = Cardan F3/8, 05 = M15*1, 06 = 11.2mm Quick plug + loose quick connect to M15x1, 07 = F15*1. E.g. JD-PN100-06-0105.

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #250904002

Range of EVOX stainless steel or grey nylon braided polyethylene lined flexible hose assemblies incorporating EPDM ‘O’-rings with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250904002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: MALE 8X1 MALE 10X1 F ½ WITH GASKET F 3/8 WITH GASKET
Marking:: MRG DN 6 WRAS, year of manufacture YY
Installation Requirements:: R001 R008
Expiry date:: 30/09/2030
Model:: EVOX DN6 RANGE

Approval Holder:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 Gozzano
Postcode
28024
Country
Italy
Phone
+39 0322 94131
General Email
info@mrgspa.com

View All Listings by this Company

WRAS Approval Number: #250915001

‘KM1001 series’ of stainless steel braided EPDM lined flexible hose assemblies. Compression end connections are for use with copper pipes (manufactured to EN 1057). Compression end connections are also available with brass bodied (nickel plated) isolation valves incorporating a chrome plated brass ball. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250915001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: COMEALE (registered trademark of Taizhou Kemei Plumbing Hose Co., Ltd), WRAS and year of manufacture (YYYY) on ferrules.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: KM1001 series: DN8 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G1/2” BSP (F) elbow, M8x1 and M10x1. DN10 bore available with connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, M8x1, M10x1, M12x1, 15mm compression and 15mm compression with isolation valve. DN12 bore available with connections: G1/2” BSP (F), G3/4” BSP (F), G1/2” BSP (F) elbow, G3/4” BSP (F) elbow, 22mm compression and 22mm compression with isolation valve.

Approval Holder:: Taizhou Kemei Plumbing Hose Co., Ltd

Company Name
Taizhou Kemei Plumbing Hose Co., Ltd
Address
120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province
Country
China
General Email
export@tzkemei.com

View All Listings by this Company
Manufacturer:: Taizhou Kemei Plumbing Hose Co., Ltd

Company Name
Taizhou Kemei Plumbing Hose Co., Ltd
Address
120 meters north of the intersection of Xinxuan Line and Wupu Road, Chumen Town, Yuhuan City, Zhejiang Province
Country
China
General Email
export@tzkemei.com

View All Listings by this Company

WRAS Approval Number: #250912045

Range of stainless-steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature: 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250912045
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: SODAO, WRAS and year of manufacture (YYYY).
Installation Requirements:: R001 R008
Expiry date:: 30/09/2030
Model:: SD-x-xx-xx-xxx Where: “x” = bore diameter: DN8, DN12 or DN20. “xx” = connection sizes: 01 = 1/4” OD (plain pipe for pushfit), 02 = 3/8” OD (plain pipe for pushfit), 03 = F1/2” OD (plain pipe for pushfit), 04 = F3/8”, 05 = M3/8”, 06 = F1/2”, 07 = M1/2”, 08 = F3/4”, 09 = M3/4”, 10 = F1”, 11 = M1”, 12 = Elbow 1/2”, 13 = Elbow 3/4”, 14 = Elbow 1". “xxx” = hose length: 15cm-200cm. Connection: 01, 02, 03, 04, 05, 06, 07, 12 applicable for DN8 only. Connection: 06, 07, 08, 09, 12, 13 applicable for DN12 only. Connection: 08, 09, 10, 11, 13, 14 applicable for DN20 only.

Approval Holder:: SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD

Company Name
SHANGHAI SODAO SANITARYWARE EQUIPMENT CO., LTD
Address
1-2, Building 9, Donglin Science Park, No. 408 Nanwenzao Road, Baoshan District, Shanghai

View All Listings by this Company
Manufacturer:: SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD

Company Name
SODAO PLUMBING TECHNOLOGY (TAIZHOU) CO., LTD
Address
No.5, Youth West Road, Zhongshan Industrial Zone, Chumen Town, Yuhuan City, Zhejiang

View All Listings by this Company

WRAS Approval Number: #260114001

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 260114001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Model
Marking:: Marking: PPI, WRAS & date of manufacture (YYYY) on crimp connector.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: BZG-A-B-C-XXXX (BZG – Connection A - Connection B – Outer braided material – Length) BZG – The name of our braided tube A-B – Connection A and Connection B (from 01 to 15) 01 = F1/2, 02 = F1/2 Rotating joint, 03 = F3/8, 05 = 15mm compression fitting(17-100), 06 = F15, 07 = F10, 08 = M8*1(L=12-100), 09 = M10*1(L=12-100), 10 = M12*1(L=12-100), 11 = M12*1(two O ring), 12 = M15*1, 13 = T connection（L=2-110), 14 = ￠10 Quick installation connector & 15 = M22*1 C – Outer braided material: SS = stainless steel wire, NY= gray or black nylon wire , SR= stainless steel wire plus red nylon wire, SB= stainless steel wire plus blue nylon wire, NR= gray or black nylon wire plus red nylon wire & NB= gray or black nylon wire plus blue nylon wire. XXXX – Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #251002010

Range of Stainless-Steel braided EPDM lined flexible hose assemblies with various end connections. For use with copper pipe manufactured to EN1057 Maximum working pressure; 16 Bar Maximum operating temperature; 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251002010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models
Marking:: Fanski, WRAS and year of manufacture (YYYY) on the hose ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: DG10E-WRAS-461-L (3/4" BSP (F) x 21mm compression) DG10E-WRAS-462-L (1” BSP (F) x 1” BSP (F)) DG10E-WRAS-463-L (1” BSP (F) x 1” BSP (M)) DG10E-124-001-L (1/2” BSP (F) x 15mm Spigot) Model naming rules: DG10E-WRAS-461-L as example, DG10E=series name, 461= model code, L=length and can be between 50mm and 4000mm.

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #251004001

Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of end connections. Some models incorporate push-fit isolation valves. Compression connection to be used with DM LLDPE pipes or PEX barrier pipe manufactured to BS7291-3. Maximum working pressure and maximum operating temperature 12 bar @cold water use only & 7 bar @ 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251004001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Fanski, WRAS, year of manufacture (YYYY) stamped on ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: DG10E-016-001-L F3/4” x 15mm PF DN13 DG10E-016-002-L F3/4” x 15mm PF with valve DN13 DG10E-016-003-L F3/4” x 22mm PF with valve DN13 DG10E-016-004-L F3/4” x 21mm PF with valve DN13 DG10E-016-005-L F3/4” elbow x 15mm PF with valve DN13 DG10E-016-006-L F3/4” elbow x 15mm stand pipe DN13 DG10E-016-007-L F3/4” elbow x F3/4” DN13 DG10E-016-008-L F3/4” x 21mm PF with valve DN13 DG10E-016-009-L F3/4” x 22mm PF with valve DN13 DG10E-016-010-L F3/4” x 15mm stand pipe DN13 DG10E-016-011-L F3/4” elbow x 22mm PF with valve DN20 DG10E-016-012-L F3/4” x 22mm PF with valve DN20 DG10E-016-013-L F3/4” x F1” DN20 Push-fit connections for use with copper pipe manufactured to BS EN 1057. Model naming rules: "DG10E-016-001-L" as example, DG10E-016=series name, 001=model code, L=length and can be between 50mm and 4000mm.

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company

WRAS Approval Number: #251015010

‘DG10E PF series’ of stainless steel braided EPDM lined flexible hose assemblies with EPDM ‘O’-rings or gaskets available with a variety of end connections. The DN10 bore 15mm push fit connection is also available with a screwdriver operated isolation valve. Push-fit connections are for use with copper pipes (manufactured to EN 1057) and PEX pipes (manufactured to BS 7291-3). Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 251015010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: FANSKI, WRAS and year of manufacture (YYYY) on ferrules.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: DG10E PF series DN10 bore available with connections: G1/2” (F), G3/4” (F), M10x1 long, M10x1 short, M12x1 long, M12x1 short, 15mm push fit and 15mm push fit with isolation valve. DN13 bore available with connections: G1/2” (F), G3/4” (F), 15mm push fit and 22mm push fit.

Approval Holder:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company
Manufacturer:: Fanski Group Inc.

Company Name
Fanski Group Inc.
Address
NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang
Postcode
317600
Country
China

View All Listings by this Company