Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Section Code 2410 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed. It should also be noted that there is a likelihood of some materials being leached into the water, which together with materials already in the water at source, could exceed the maximum limits set in the EC Directive on Water Quality and therefore it is recommended that before putting such units into service where the water may be ingested, advice should first be sought from the Water Undertaker.
Back To Directory Sections
WRAS Approval Number: #240102720
Range of in-line water conditioners with stainless steel bodies and catalytic alloy core.
Maximum working pressure 16.0 bar.
Maximum operating temperature 100°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- Size:
- Please refer to model.
- Marking:
- Monarch Water Professionals & flow arrow on body.
- Installation Requirements:
- R001 R120 R170
- Expiry date:
- 31/01/2029
- Model:
-
SI-CD-15 - ½” BSP (M).
SI-CD-20 - ¾” BSP (M).
SI-CD-25 - 1” BSP (M).
SI-CD-32 - 1¼” BSP (M).
SI-CD-40 - 1½” BSP (M).
SI-CD-50 - 2” BSP (M).
SI-CD-65 - 2½” Flanged.
SI-CD-80 - 3” Flanged.
SI-CD-100 - 4” Flanged.
SI-CD-125 - 5” Flanged.
SI-CD-150 - 6” Flanged.
- Approval Holder:
- Monarch Water Ltd
Company Name
Monarch Water Ltd
Address
Fair Green
Diss
Norfolk
Postcode
IP22 4DG
Country
United Kingdom
Phone
01986 784759
General Email
kdelaney@monarchwater.co.uk
View All Listings by this Company
WRAS Approval Number: #240102721
Range of inline water conditioners with stainless steel bodies and catalytic alloy core.
Maximum working pressure 16.0 bar.
Maximum operating temperature 100°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- Size:
- Please refer to model.
- Marking:
- Monarch Water Professional and flow arrow on body.
- Installation Requirements:
- R001 R120 R170
- Expiry date:
- 31/01/2029
- Model:
-
SI-C-15 – ½” BSP (M)
SI-C-20 – ¾” BSP (M)
SI-C-25 - 1” BSP (M)
SI-C-32 – 1¼” BSP (M).
SI-C-40 - 1½” BSP (M).
SI-C-50 - 2” BSP (M).
SI-C-65 – 2.5” Flange.
- Approval Holder:
- Monarch Water Ltd
Company Name
Monarch Water Ltd
Address
Fair Green
Diss
Norfolk
Postcode
IP22 4DG
Country
United Kingdom
Phone
01986 784759
General Email
kdelaney@monarchwater.co.uk
View All Listings by this Company
WRAS Approval Number: #241004715
Range of in-line electrolytic scale reducers with copper bodies for use with copper pipe (manufactured to BS EN 1057).
Maximum working pressure 10.0 bar.
Maximum operating temperature 40°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- 15mm & 22mm compression.
- Marking:
- Gaobo & WRAS on body.
- Installation Requirements:
- R001 R120 R150 R170 R290
- Expiry date:
- 31/10/2029
- Model:
-
7568050511 & 7568062211 (15mm compression).
7568086211 (22mm compression).
Product Images
- Manufacturer:
- Zhejiang Gaobo Sanitary Wares Co Ltd
Company Name
Zhejiang Gaobo Sanitary Wares Co Ltd
Address
Xiaqiu,
Yuhuan Sci-Tech Industrial Area,
Zhejiang
Country
China
View All Listings by this Company
WRAS Approval Number: #241004729
In-line polyphosphate scale inhibitor. The product is supplied with a single check valve cartridge in the inlet connection, verified by test (suitable for backflow protection against Fluid Category 2).
Maximum working pressure 5.0 bar.
Cold water use only.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- 22mm compression
- Marking:
- BWT and product info on adhesive label on body.
- Installation Requirements:
- R001 R120 R150 R170 R290
- Expiry date:
- 31/10/2029
- Model:
-
AC002200 BWT Combi Care
Product Images
- Manufacturer:
- BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4
Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
View All Listings by this Company
WRAS Approval Number: #241002721
In-line electrolytic scale reducer with chromium plated copper body for use with copper pipe manufactured to BS EN 1057.
Maximum working pressure 10.0 bar.
Maximum operating temperature 99°C.
- Section:
- 2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- 15mm compression inlet/outlet
- Marking:
- Avonflow, date of manufacture (YY/WW) and WRAS on body
- Installation Requirements:
- R001 R150 R170 R290
- Expiry date:
- 31/10/2029
- Model:
-
CG001 Scale Reducer
Product Images
- Manufacturer:
- JIANGXI AVONFLOW HVAC TECH CO., LTD.
Company Name
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Address
Xuri Area Shangrao Economic Development Zone,
Jiangxi Province
View All Listings by this Company
Page 13 of 16
