Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103351

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

29030007 F1/2" X F1/2”X 30CM DN10 29030008 F3/4" X F3/4”X 30CM DN13 29030011 F3/8”X15MM X 30CM DN10 29030020 F1/2”X15MM X 30CM DN10 29030065 F1/2”X15MM X 50CM DN10 29030101 F1/2”X15MM X 90CM DN10 29030104 F1/2”X15MM X 100CM DN10 29030119 F3/4”X15MM X 30CM DN10 29030137 F3/4”X15MM X 50CM DN10 29030141 F3/4”X15MM X 100CM DN10 29030236 15MM X15MM X 30CM DN10 29030272 15MM X15MM X 50CM DN10 10000201 15MM X15MM X 100CM DN10 29030245 15MM X15MM X 30CM DN13 29030281 15MM X15MM X 50CM DN13 29030029 F1/2”X15MM X 30CM DN13 29030074 F1/2”X15MM X 50CM DN13 29030110 F1/2”X15MM X 100CM DN13 29030155 F3/4”X22MM X 30CM DN13 29030191 F3/4”X22MM X 50CM DN13 29030218 F3/4”X22MM X 90CM DN13 29030221 F3/4”X22MM X 100CM DN13 29030128 F3/4”X15MM X 30CM DN13 29030146 F3/4”X15MM X 50CM DN13 29030290 22MM X22MM X 30CM DN13 10000202 22MM X22MM X 50CM DN13 29030047 F1/2”X15MM ISO VALVE X 30CM DN10 29030083 F1/2”X15MM ISO VALVE X 50CM DN10 29030254 15MM X15MM ISO VALVE X 30CM DN10 29030182 F3/4”X22MM ISO VALVE X 30CM DN13 29030209 F3/4”X22MM ISO VALVE X 50CM DN13 29030400 F1/2”X15MM PUSHFIT X 30CM DN10 29030402 F1/2”X15MM PUSHFIT X 50CM DN10 29030404 F3/4”X15MM PUSHFIT X 30CM DN10 29030406 F3/4”X22MM PUSHFIT X 30CM DN13 29030408 F1/2”X15MM PUSHFIT WITH ISO VALVE X 30CM DN10 29030410 15MM PUSHFIT X15MM PUSHFIT X 30CM DN10 29030164 F3/4”X22MM X 30CM DN19 29030200 F3/4”X22MM X 50CM DN19 29030227 F3/4”X22MM X 90CM DN19 29030308 15MM X 10MMX30CM DN8 29030317 15MM X 12MMX30CM DN10

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road Yuhuan Economic Development Zone Yuhuan Zhejiang

Postcode

317600

Country

China

Phone

86-576-89901684

View All Listings by this Company

Range of stainless-steel braided EPDM lined flexible hose assemblies. Compression connections are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240502056

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

F3/8: ⅜” captive nut, F3/8 elbow: ⅜” captive nut (elbow), F1/2: ½” captive nut, F1/2 elbow: ½” captive nut (elbow), F3/4: ¾” captive nut, F3/4 elbow: ¾” captive nut (elbow), M8x1: M8x1, M10x1: M10x1, M12x1: M12x1, M3/8: ⅜” BSP (M), M1/2: ½” BSP (M), M3/4: ¾” BSP (M), T10: 10mm fitting with plain and short smooth tube with recess, 10MM: 10mm compression, 12MM: 12mm compression, 14MM: 14mm compression, 16MM: 16mm compression.

Marking:

AMG logo (‘AMG’), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AMG-E-SS-F3/8-F3/8-DN8, AMG-E-SS-F3/8-M1/2-DN8, AMG-E-SS-F3/8-M8X1-DN8, AMG-E-SS-F3/8-M10X1-DN8, AMG-E-SS-F3/8-M12X1-DN8, AMG-E-SS-F3/8-M3/8-DN8, AMG-E-SS-F3/8-F3/8 elbow-DN8, AMG-E-SS-F1/2-F3/8-DN8, AMG-E-SS-F1/2-F1/2-DN8, AMG-E-SS-F1/2-M1/2-DN8, AMG-E-SS-F1/2-M8X1-DN8, AMG-E-SS-F1/2-M10X1-DN8, AMG-E-SS-F1/2-M12X1-DN8, AMG-E-SS-F1/2-M3/8-DN8, AMG-E-SS-F1/2-F1/2 elbow-DN8, AMG-E-SS-F3/4-F3/4-DN8, AMG-E-SS-F3/4-M1/2-DN8, AMG-E-SS-F3/4-M3/4-DN8, AMG-E-SS-F3/4-F3/4 elbow-DN8, AMG-E-SS-M1/2-F1/2 elbow-DN8, AMG-E-SS-M3/4-F3/4 elbow-DN8, AMG-E-SS-M3/8-F3/8 elbow-DN8, AMG-E-SS-F3/8-T10-DN8, AMG-E-SS-F3/8-10MM-DN8, AMG-E-SS-F3/8-12MM-DN8, AMG-E-SS-F1/2-T10-DN8, AMG-E-SS-F1/2-10MM-DN8, AMG-E-SS-F1/2-12MM-DN8, AMG-E-SS-F1/2-14MM-DN8, AMG-E-SS-F3/4-16MM-DN12, AMG-E-SS-M1/2-10MM-DN8, AMG-E-SS-M1/2-12MM-DN8, AMG-E-SS-M1/2-14MM-DN8, AMG-E-SS-M3/8-10MM-DN8, AMG-E-SS-M3/8-12MM-DN8, AMG-E-SS-F3/4-F3/4-DN10, AMG-E-SS-F1/2-F1/2-DN10, AMG-E-SS-F1/2-M1/2-DN10, AMG-E-SS-F3/8-M10X1-DN10, AMG-E-SS-F3/8-M12X1-DN10, AMG-E-SS-F1/2-F1/2 elbow-DN10, AMG-E-SS-F3/4-M1/2-DN10, AMG-E-SS-F3/4-M3/4-DN10, AMG-E-SS-F3/4-F3/4 elbow-DN10, AMG-E-SS-F1/2-M10X1-DN10, AMG-E-SS-F1/2-M12X1-DN10, AMG-E-SS-M1/2-F1/2 elbow-DN10, AMG-E-SS-M3/4-F3/4 elbow-DN10, AMG-E-SS-F3/4-F3/4-DN12, AMG-E-SS-F1/2-F1/2-DN12, AMG-E-SS-F3/4-M3/4-DN12, AMG-E-SS-F3/4-F3/4 elbow-DN12, AMG-E-SS-M1/2-F1/2 elbow-DN12, AMG-E-SS-M3/4-F3/4 elbow-DN12, AMG-E-SS-F3/4-M1/2-DN12, AMG-E-SS-F1/2-F1/2 elbow-DN12.

Product Images

Approval Holder:

Yuhuan AMG Just Valve Co., Ltd

Company Name

Yuhuan AMG Just Valve Co., Ltd

Address

M&E Industrial Zone, Yuhuan, Zhejiang

Country

China

Phone

86 576 87281908

General Email

trading@amg.com.cn

View All Listings by this Company

Manufacturer:

Yuhuan AMG Just Valve Co., Ltd

Company Name

Yuhuan AMG Just Valve Co., Ltd

Address

M&E Industrial Zone, Yuhuan, Zhejiang

Country

China

Phone

86 576 87281908

General Email

trading@amg.com.cn

View All Listings by this Company

Range of air venting valves with a stainless-steel bodies and springs, plastic float and EPDM ‘O’-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 80.0°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

240602047

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

CLA-VAL logo, DN, PFA, serial number and model number on data plate

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

VENT-A-RISER AQUA B70-526 DN25 - 1” BSP (M), AQUA 70-516 DN50 - 2” BSP (M), AQUA 70-516 DN80 - flanged, AQUA 70-516 DN100 - flanged, AQUA 70-516 DN150 - flanged, AQUA 70-516 DN200 - flanged.

Product Images

Approval Holder:

Cla-Val UK Ltd.

Company Name

Cla-Val UK Ltd.

Address

Dainton House 107 Goods Station Road Tunbridge Wells

Postcode

TN1 2DR

Country

United Kingdom

Phone

01892 514400

General Email

liam.kent@cla-val.co.uk

View All Listings by this Company

Range of air release valves with plastic bodies, EPDM ‘O’ rings and polypropylene floats. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

241204001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see model

Marking:

Bermad on body. Size, model, PN, DN, date of manufacture (MM/YYYY) on adhesive label on body.

Installation Requirements:

R001 R535

Expiry date:

31/12/2029

Model:

A30-3/4”: ¾” BSP (M). A30-1”: 1” BSP (M). C30-3/4”: ¾” BSP (M). C30-1”: 1” BSP (M). C30-2”: 2” BSP (M).

Approval Holder:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Manufacturer:

Bermad CS Ltd

Company Name

Bermad CS Ltd

Address

Kibbutz Evron 2280800, Israel

View All Listings by this Company

Range of automatic air venting valves with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 6.0 bar. Maximum operating temperature 99°C.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

240504023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For close circuit use only.

Size:

See models.

Marking:

Caleffi logo moulded on cap.

Installation Requirements:

R001 R200

Expiry date:

31/05/2029

Model:

49513: 20.9mm pushfit manifold, C502433 CST: ⅜” BSP (M), C502600 CST: 19.9mm pushfit manifold, C502601 CST: 20.9mm pushfit manifold, C502604 PLY: 17.7mm pushfit manifold, C502630 CST: ⅜” BSP (M), C502631 CST: ⅜” BSP (M), C502633 CST: ⅜” BSP (M), C502640 CST: ½” BSP (M), C502644 CST: ½” BSP (M), C502634 CST: ⅜” BSP (M).

Product Images

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company