Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2205574

'Maxline 100 Potable Water Coating Blue & Grey'. Site applied, two-component polyurethane coatings which are available in blue or grey colours (once mixed). Mix Part A (blue or grey opaque liquid) with Part B (amber, translucent liquid) in a 100:30.5 weight ratio and apply as per manufacturer's technical data sheet 'TDSMLI100.rv5.04042023'. Cure for 14 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:: 5042 Coatings, Paints & Linings
Section Subtitle:: Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:: 2205574
Expiry date:: 31/05/2027

Approval Holder:: Maxkote Ltd.

Company Name
Maxkote Ltd.
Address
Clifton Moor, York
Postcode
YO30 4XL
Phone
+44 1904 809 773
General Email
info@maxkote.co.uk

View All Listings by this Company

WRAS Approval Number: #2211551

'PPE HY3140G'. Black coloured, injection moulded PPE material. For use with water up to 85°C.

Section:: 5253 Polyphenylene Ether (PPE)
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2211551
Expiry date:: 30/11/2027

Approval Holder:: Hunan Henyl Advanced Materials Co., Ltd.

Company Name
Hunan Henyl Advanced Materials Co., Ltd.
Address
Xianghong Industrical Park, Xinhua Economic and Technological Development Zone, Loudi City, Hunan 417600
Country
China

View All Listings by this Company

WRAS Approval Number: #2302531

'PPELXS314G20NA'. Beige coloured, injection moulded PPE material. For use with water up to 85°C.

Section:: 5253 Polyphenylene Ether (PPE)
Section Subtitle:: Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:: 2302531
Expiry date:: 29/02/2028

Approval Holder:: Nantong Xingchen Synthetic Material Co., Ltd.

Company Name
Nantong Xingchen Synthetic Material Co., Ltd.
Address
118, Jianggang Rd, Nantong Economic Development Zone， Nantong, Jiangsu
Country
China

View All Listings by this Company

WRAS Approval Number: #2212569

'UW61424 & UW61427 – Instinct'. White coloured, extruded PTFE tapes. For use with water up to 85°C.

Section:: 5294 Polytetrafluoroethylene (PTFE)
Section Subtitle:: Components.
WRAS Approval Number:: 2212569
Expiry date:: 31/12/2027

Approval Holder:: STH Westco Limited

Company Name
STH Westco Limited
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230
General Email
john.gartshore@westco.co.uk

View All Listings by this Company

WRAS Approval Number: #2208606

'7EP2114 'O'-rings'. Black coloured, injection moulded EPDM 'O'-rings. Shore hardness 70. Tested in-radius size 0.9mm. For use with water up to 85°C.

Section:: 5360 Rubbers
Section Subtitle:: Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:: 2208606
Expiry date:: 31/08/2027

Approval Holder:: Hutchinson Le Joint Francais

Company Name
Hutchinson Le Joint Francais
Address
ZI Ouest de Bazouges, Route de Craon, 53200 CHATEAU GONTIER
Country
France

View All Listings by this Company