Directory Search Results

Print List

#2009301

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating 3x quarter turn ceramic disc headworks with single lever operating members. The third ceramic disc headwork on the front of the tap body is intended to control the flow for a filtered water supply. The inlet to the cold supply incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic Aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2009301
Note:
The filter and associated connecting hoses to it and the tap must be purchased separately and are not covered under the scope of this approval.
Size:
Hot: Stainless steel braided EPDM lined flexible hose assembly incorporating a ½” captive nut end connection. Cold: Stainless steel braided EPDM lined flexible hose assembly incorporating a ½” BSP (M) end connection.
Marking:
SMR and Abode on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2025
Model:
Orcus Aquifer
Product Images

Approval Holder:
Norcros Group (Holdings) Limited T/A Abode
Company Name
Norcros Group (Holdings) Limited T/A Abode
Address
Unit L Zenith Park Whailey Road Barnsley
Postcode
S75 1HT
Country
United Kingdom
Phone
01226 283434
General Email
info@abode.eu

View All Listings by this Company
Manufacturer:
San Marco Rubinetteria Srl
Company Name
San Marco Rubinetteria Srl
Address
Via Carducci 10 13867 Pray Biellese (Biella)
Country
Italy
Phone
+39 15765 5244
General Email
info@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2010362

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic disc headwork and single lever operating member. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2010362
Size:
Polyamide (PA) braided PEX lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
Marking:
Grohe, design and engineering, Grohe Germany, date of manufacture (YYMM), Grohe ID plant, made in label etched on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2025
Model:
30.335.001 StartLopp OMH sink mixer (chrome plated). 30.335.DC1 StartLopp OMH sink mixer (supersteel coloured).
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2010328

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2010328
Size:
15mm copper tails.
Marking:
DEVA on front of body. DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2025
Model:
CONV130 Converse mono sink mixer.
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006365

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2006365
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC25 (brand of Methven) & Methven (models added August 2023) on body.
Installation Requirements:
R001 R006 R009 r010
Expiry date:
30/06/2025
Model:
ELSMCP, ELSMBK & MASMCP COMBINATION TAP ASSEMBLIES MODELS ADDED AUGUST 2023: INST-MCP-1HKM & INST-MCF-1HKM

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011024

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating either a ceramic cartridge headwork (models SH2CP/SH2BN), or quarter turn ceramic disc headwork (all other models) and single lever operating members. The spout outlets of all models incorporate a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2011024
Size:
M10
Marking:
Clearwater on base of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2025
Model:
Rococo: RO81062CP - Chrome plating. RO81062BN - Brush nickel. RO81062AB - Brush gold. RO81062BV - ORB. RO81062RC - Brush brass. Savita: SA2CP - Chrome plating. SA2BN - Brush nickel. Tutti: TU81073CP - Chrome plating. TU81073BS - Brush nickel. TU81073AB - Brush gold. TU81073BV - ORB. TU81073RC - Brush brass. Vitro: VITCP - Chrome plating. VITBS - Brush nickel.
Product Images

Approval Holder:
Clearwater Products
Company Name
Clearwater Products
Address
Unit 5603 Shannon Place, Tewkesbury Business Park, Tewkesbury
Postcode
GL20 8SL
Country
Gloucestershire
Phone
01684 299555

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 118 of 2243

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.