'‘Welding polymer for Kryoclim®️, Girair®️ and HTA (formerly known as GIRPI HTA Fusion THF Free'. Site applied, orange coloured solvent cement, intended to join PVC-C pipe and fittings. Apply as per pages 4.2 & 4.3 of 'Durapipe HTA®' technical data sheet '04900200 February 2013'. Cure for 24 hours at 7°C. For use with water up to 70°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/03/2029

Approval Holder:

Aliaxis UK Ltd.

Company Name

Aliaxis UK Ltd.

Address

35 St Peter’s Road, Huntingdon

Postcode

PE29 7DA

Country

United Kingdom

Phone

01622852761

General Email

david.cousins@aliaxis.com

View All Listings by this Company

Range of single-hole, single outlet (fixed) electronically operated, tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by a touch sensor. The spout outlets incorporate plastic aerators. Max working pressure 8.0 bar. Max operating temperature 65°C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240502016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless-steel braided PEX lined flexible hose assembly incorporating a 10mm spigot end connection.

Marking:

Stern logo on tap cover.

Installation Requirements:

R001 R006 R009

Expiry date:

31/05/2029

Model:

225100 - Touch B 225200 - Touch E

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure - 8 Bar. Maximum operating temperature - 65 °C.

Section:

0684 Combination Tap Assemblies

Section Subtitle:

Tap(s) with a non-touch methods of flow control and a single inlet.

WRAS Approval Number:

240702013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm spigot connection

Marking:

Stern logo on tap body

Installation Requirements:

R001 R040

Expiry date:

31/07/2029

Model:

360100 – Cubica B 360200 – Cubica E 360110 – Cubica DP B 360210 – Cubica DP E

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

BS1212-4 (2016) compact type float operated valve for WC flushing cisterns, side entry type. The inlet incorporates a plastic flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2109073

Size:

½” BSP (M) 3/8” BSP (M)

Marking:

UNISANI, BS1212-4 & model on body

Installation Requirements:

R001 R550

Expiry date:

30/09/2026

Model:

BWA1200

Approval Holder:

UNISANI (XIAMEN) TECHNOLOGY CO., LTD

Company Name

UNISANI (XIAMEN) TECHNOLOGY CO., LTD

Address

Unit 1204, No.496, Xinglinwan Road, Jimei District, Xiamen

Country

China

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

240904013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Some products are supplied with lever type pop up waste – not verified by test. See below models.

Size:

Stainles steel braided PEX lined flexible hose assemblies incorporating a 3/8” BSP (F) captive nut end connections

Marking:

Villeroy & Boch on operating memeber

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2029

Model:

TVW107001000XX Liberty - with waste set TVW122001000XX Empora TVW107001001XX Liberty TVW122008000XX Empora TVW107002000XX Liberty TVW107003000XX Liberty - with waste set TVW122002000XX Empora TVW107003001XX Liberty TVW122009000XX Empora TVW107004000XX Liberty TVW122003000XX Empora TVW107005000XX Liberty TVW122004000XX Empora TVW107006000XX Liberty TVW122005000XX Empora XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company