Directory Search Results

Print List

#2305356

Range of wall mounted, electronically operated combination tap assembly (chrome plated brass body). The flow is controlled by a solenoid valve which is actuated via an infrared sensor. The spout outlets incorporate a plastic aerator. The solenoid valve inlet incorporates a plastic and stainless steel filter. The products are supplied with a triple layered connecting hose (PVC inner and outer layer and nylon braided middle layer). Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2305356
Note:
R008 applies to the solenoid and solenoid housing.
Size:
½” BSP (M)
Marking:
Twyford on operative member and DTC28 on the rear.
Installation Requirements:
R001 R007 R008 R010
Expiry date:
31/05/2028
Model:
SF1249CP

Approval Holder:
Twyford Geberit Group
Company Name
Twyford Geberit Group
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926 516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#240402026

Deck mounted single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve actuated via an infra-red sensor. Temperature is manually blended using a single lever operating member. The spout outlets incorporate plastic aerators. The inlets incorporate approved check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection and stainless-steel strainers. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240402026
Size:
Stainless steel braided, PEX lined flexible hoses incorporating 3/8" captive nut end connections.
Marking:
Stern logo on tap cover.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2029
Model:
237100 – Extreme 1000B 237000 – Extreme 1000E 237170 – Extreme 1000 LB 237180 – Extreme 1000 LE 237150 – Extreme 1000 Plus B 237050 – Extreme 1000 Plus E 237151 – Extreme 1000 Plus LB 237051 – Extreme 1000 Plus LE

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2312362

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2312362
Size:
½” BSP (M).
Marking:
OLI on cistern. 6l line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/12/2028
Model:
AI103 PLUS MEC AI103 PLUS PNEU

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#240404707

In-line non-verifiable single check valve assembly consisting of a single check valve cartridge housed within a DZR brass body. Maximum working pressure 16.0 bar. Cold water use only.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
Non-verifiable single check valve assembly - Type EB. Providing Fluid Category 2 protection. Verified by test.
WRAS Approval Number:
240404707
Size:
¾” BSP (F) x ¾” BSP (M)
Marking:
Aquacheck, CR, flow arrow and 750MFS on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
Aquacheck 750MFS

Approval Holder:
Aquacheck Engineering Ltd
Company Name
Aquacheck Engineering Ltd
Address
Royal Barn Road Castleton Rochdale
Postcode
OL11 3DT
Phone
01706 712 593
General Email
sales@aqua-check.co.uk

View All Listings by this Company
Manufacturer:
Aquacheck Engineering Ltd
Company Name
Aquacheck Engineering Ltd
Address
Royal Barn Road Castleton Rochdale
Postcode
OL11 3DT
Phone
01706 712 593
General Email
sales@aqua-check.co.uk

View All Listings by this Company

Print This Approval


#241204701

Verifiable double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body with two test ports. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0032 Backflow Prevention Devices
Section Subtitle:
Verifiable double check valve assembly - Type EC. Providing Fluid Category 3 protection. Verified by test.
WRAS Approval Number:
241204701
Note:
Not for use with water injected with CO2 gas
Size:
¾” BSP (M) outer, ½” BSP (F) inner
Marking:
Caleffi, flow arrow, CR, DN15, NF ECI moulded on body
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
304841 CST

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1095 of 2101

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.