Directory Search Results

Print List

#240604706

Range of primary hot water buffer tanks consisting of insulated enamel and Stainless steel shells. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Adhesive label on body stating Lapesa (Manufacturer) Adress, Model No, serial No, Year of manufacture, Capacity, actual capacity max pressure and other tech info
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
CVM-RB-1000/PSS [3" male BSP inlet and outlet]. CVM-RB-1000/PSS2 [2" male BSP inlet and outlet]. CVM-RB-1000 [2" male BSP inlet and outlet]. CVM-RB-750/PSS [3" male BSP inlet and outlet]. CVM-RB-750/PSS2 [2" male BSP inlet and outlet]. CVM-RB-750 [2" male BSP inlet and outlet]. CVM-R-750/PSS [3" male BSP inlet and outlet]. CVM-R-750/PSS2 [2" male BSP inlet and outlet]. CVM-R-750 [2" male BSP inlet and outlet]. CVM-R-500/PSS [3" male BSP inlet and outlet]. CVM-R-500/PSS2 [2" male BSP inlet and outlet]. CVM-R-500 [2" male BSP inlet and outlet].

Approval Holder:
Mitsubishi Heavy Industries Air conditioning Europe
Company Name
Mitsubishi Heavy Industries Air conditioning Europe
Address
5 The Square Hayes Uxbridge Middlesex
Postcode
UB11 1ET
Country
United Kingdom
Phone
+44(0)75 8663 8352
General Email
mohamed.abdihakim.hp@mhi.com

View All Listings by this Company
Manufacturer:
Lapesa Grupo Empresarial S. L.
Company Name
Lapesa Grupo Empresarial S. L.
Address
Polígono Industrial Malpica, C/A, Parcela 1A, 50016 Zaragoza
Country
Spain
General Email

View All Listings by this Company

Print This Approval


#240602060

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602060
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
DVS on cap IMIX, CR and size on body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
15mm Compression Models: AC17-047 22mm Compression Models: AC17-048

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Country
United Kingdom
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#240602061

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 85.0°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240602061
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm or 22mm compression (see models) for use with copper pipe (EN1057) only.
Marking:
Twyford on label on cap. IMIX, CR and size on body.
Installation Requirements:
R001 R040
Expiry date:
30/06/2029
Model:
15mm Compression Models: SF1037XX 22mm Compression Models: SF1038XX

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#240702012

Range of T-type thermostatic blending valves with DZR brass bodies (various finishes). Compression inlets incorporate a stainless-steel strainer and check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Push-fit inlets incorporate a check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. HEAT112050 & HEAT112055 models incorporate angled inlets with integral spherical valves. HEAT112010, HEAT112015, HEAT112050, HEAT112055 – Compression for use with copper pipe (to BSEN1057:2006) only. HEAT155001, HEAT155010 – Push fit for use with PEX pipe (to BS7291 part 3), Polybutylene pipe (to BS7291 part 2) & Copper pipe (to BSEN1057:2006). Maximum working pressure 10.0 bar at 20°C and 7.0 bar at 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240702012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R010 applies to push-fit models only
Size:
Please refer to models.
Marking:
RWC logo, TMV and easyfit on cap. Date of manufacture (DWWYYLL), Flow arrow CR and H+ C on body. Models added January 2025: RWC logo on cap. CR, date of manufacture (D/WW/YY/LL), flow arrow and H+C on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2029
Model:
HEAT112 SERIES: HEAT112010: EASIFIT TMV 15MM 2: 1 COMPRESSION. HEAT112015: EASIFIT TMV 22MM 2: 1 COMPRESSION. HEAT112050: EASIFIT TMV 15MM 4: 1 COMPRESSION. HEAT112055: EASIFIT TMV 22MM 4: 1 COMPRESSION. HEAT155 SERIES: HEAT155001: EASIFIT TMV 12MM 2: 1 PUSH FIT. HEAT155010: EASIFIT TMV 15MM 2: 1 PUSH FIT. Models added May 2025: HEAT112100 ½” BSP M. HEAT112110 ¾” BSP M.
Product Images

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company
Manufacturer:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#240402074

Range of butterfly valves with an epoxy coated ductile iron body, stainless steel disc and single lever or handwheel operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
240402074
Size:
DN 40 to DN 300 flanged connections.
Marking:
PHD Ltd, size, PN and serial number on data plate on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
SLBW (wafer). GOSLBW (lugged). FLBW (wafer). GOFLBW (lugged).

Approval Holder:
Plumbing & Heating Distribution Ltd. (PHD Ltd.)
Company Name
Plumbing & Heating Distribution Ltd. (PHD Ltd.)
Address
Piksa House, 2 Penrod Way, Heysham, Lancashire
Postcode
LA3 2UZ

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1082 of 1567

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.