Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #240902006

Stainless steel interlocked (chrome plated) silicone lined kitchen tap pull-out hose. Open outlet use only. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240902006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: M12 x M12.
Marking:: Dornbracht on ferule.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: 04300212000

Product Images

Approval Holder:: Dornbracht GmbH & Co. KG.

Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

WRAS Approval Number: #240988004

Range of stainless steel inter-locked shower hoses incorporating PVC linings in various finishes. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240988004
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only
Size:: See model
Marking:: PPI, WRAS & year of manufacture (yyyy) on ferrule
Installation Requirements:: R001 R040
Expiry date:: 30/09/2029
Model:: SHS(D)(C)-A-B-L-F (SHS(08/10)(P/B/S)–Connection A - Connection B– Length - different finish) SHS – The name of our Stainless Steel Shower Tube D(08/10) – 08=DN8 or 10=DN10 C(P/B/S) – P=Plastics Core Only DN8, B=Brass Core or S=Stainless Steel Core A-B – Connection A and Connection B (from 01 to 10) 01 = F1/2 knurled nut, 02 = F1/2 hex nut , 03 = F1/2 Conical Connection Shell knurled nut, 04 = F1/2 Conical Connection Housing with O-ring nut, 05 = F1/2 Conical Connection Shell without O-ring nut, 06 = F1/2 Conical Connection, 07 = T connection, 08 = M15×1 connection, 09 = M22×1connection（L=20-30）and 10=F1/2 cone-shaped connection anti winding (Connections 01, 02, 04, 05, 06, 07, 08, 09 & 10 applicable for DN8 hoses and Connection 01, 02, 03 & 06 applicable for DN10 hoses) L (XXX) Length (15cm to 200cm): 015=15cm 200=200cm F (XXX) different finish (Chrome Finish No suffix), Chrome = No suffix, Brushed brass = BGP, PVD Gold = PVD, Brushed Nickel = BN1, Gun Metal = GMG and Electrolytic Polished = EP1 For example: "SHS08B-01-04-150 would be DN8, Brass Core,F1/2 x F1/2 Conical Connection Housing with O-ring nut , 150cm long, Chrome Finish" and "SHS10S-01-05-150-PVD would be DN10,Stainless Steel Core,F1/2 xF1/2 Conical Connection Shell without O-ring nut, 150cm long, PVD Gold Finish."

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

WRAS Approval Number: #250102002

Range of EPDM hoses with either nylon or stainless-steel braiding, with or without a PVC sheath. Some models incorporate isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250102002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See Models below
Marking:: Shida logo, Wras and date of manufacture (YYYY) on hose ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Expiry date:: 31/01/2030
Model:: SD-DD-01 (Stainless-steel braided – no sheath): Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm, 15mm valve, 22mm, 22mm valve, F15X1, M15X1. Size: DN10 - F1/2, F3/4, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. Size: DN13 - F1/2, F3/4, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve. SD-DD-02 (Nylon braided – no sheath) Size: DN6 - F3/8, F1/2, M8X1, M8X1.25, M10X1, F15X1, M15X1. Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-03 (stainless-steel braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25, M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1. SD-DD-04 (nylon braided with PVC Sheath) Size: DN8 - F3/8, F1/2, F3/4, M8X1, M8X1.25 M10X1, M12X1, 15mm compression, 15mm compression iso valve, 22mm compression, 22mm compression iso valve, F15X1, M15X1

Approval Holder:: Zhejiang Shida Pipe Co. Ltd

Company Name
Zhejiang Shida Pipe Co. Ltd
Address
Chumen Technology Industrial Zone, Wujia District, Yuhuan City, Chumen Yuhuna
Country
China
General Email
76991784@qq.com

View All Listings by this Company

WRAS Approval Number: #241002025

Range of elastomeric shower hoses with EPDM lining and ‘O’-rings. The product incorporates a flow restrictor. Maximum operating temperature 60.0°C Open outlet use only

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002025
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2" BSP (F)
Marking:: Hansgrohe logo on flow control (models 28 249 xx0 & 28 248 xx0 AXOR logo on flow control (all other models)
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: AXOR 28 127 xx0 28 128 xx0 30 246 018 Hansgrohe 28 249 xx0 28 248 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #241002059

Range of stainless-steel braided flexible hose assemblies incorporating EPDM inner and plastic (BFSFH12-EE80/150) or brass (BFSFH19-EE60) captive nut end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241002059
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 3/4” BSP X 3/4” BSP ELBOW.
Marking:: MIDBRASS®, WRAS and Year of manufacture (YYYY).
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: BFSFH12-EE80, BFSFH19-EE60 & BFSFH12-EE150.

Product Images

Approval Holder:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234

View All Listings by this Company

WRAS Approval Number: #240402081

Range of stainless steel braided, EPDM lined flexible hose assemblies with a variety of end connections (see models for full breakdown), including EPDM washers and ‘O’-rings where applicable. Some models are supplied with screwdriver operated isolation valves (see model list). All compression and push-fit fittings are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure: 16 bar. Maximum operating temperature: 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 240402081
Size:: See model
Marking:: Kingfisher, WRAS and year of manufacture (YYYY) on ferrule
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: 5063022590244 - ½” BSP (F) x 15mm comp iso valve, DN10 5063022590213 - ¾” BSP (F) x 22mm comp iso valve, DN13 5063022590237- ¾” BSP (F) x 15mm comp, DN10 5063022590206 - ¾” BSP (F) x 15mm comp iso valve, DN10 5063022590220 - ½” BSP (F) x 15mm comp, DN13

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #241004018

Range of stainless steel interlocked shower hoses with EPDM O-rings. Maximum operating temperature 65°C. Open outlet use only.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241004018
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: see model
Marking:: NB-OGH, WRAS etched on ferrule
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: SS-A-A-**-** Shower hose (interlocked) ½” BSP(F) captive nut A - Type of Nut/Connection Fitting 1 Conic nut smooth 2 Conic nut with o-ring 3 Conic nut knurl 4 Ball nut 5 Zig nut 6 Knurl nut Note 1: ** - Length 30cm-300cm Note 2: ** Denotes different finishes CP Chrome plated BN Brushed Nickel MB Matte Black ORB Oil Rubber Bronze EP Polish KH2002-A-**-** Shower hose (interlocked) M15*1 A - Type of Nut/Connection Fitting 1 Conic nut smooth 2 Conic nut with o-ring 3 Conic nut knurl Note 1: ** - Length 30cm-300cm Note 2: ** Denotes different finishes CP Chrome plated BN Brushed Nickel MB Matte Black ORB Oil Rubber Bronze EP Polish

Product Images

Manufacturer:: Yuyao Ou Gao Hose Co.,Ltd.

Company Name
Yuyao Ou Gao Hose Co.,Ltd.
Address
No.1, Second Road, Industrial West Zone, Nanlei Village, Lubu Town, Yuyao City, Ningbo City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #241015012

Range of stainless steel or black nylon braided EPDM lined flexible hose assemblies with EPDM washers and/or ‘O’-rings, and brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241015012
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model
Marking:: Jinshou, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/10/2029
Model:: JS-EPDM-01 series Bore diameters: DN6, DN8. End connections: M8*1, M10*1, F½".

Approval Holder:: Taizhou Jinshou Plumbing Fittings Co. Ltd.

Company Name
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Address
SHANGSHAN INDUSTRIAL ZONE QINGGANG TOWN YUHUAN COUNTY
Country
CHINA

View All Listings by this Company
Manufacturer:: Taizhou Jinshou Plumbing Fittings Co. Ltd.

Company Name
Taizhou Jinshou Plumbing Fittings Co. Ltd.
Address
SHANGSHAN INDUSTRIAL ZONE QINGGANG TOWN YUHUAN COUNTY
Country
CHINA

View All Listings by this Company

WRAS Approval Number: #241012002

Stainless steel braided or nylon braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241012002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: Haodi, WRAS & year (YYYY) of manufacture on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: PEX-A-B-C-B-C-D-XXX A Outer Braiding SS Stainless Steel Braided NP Nylon Braided B Connection Material BR Brass SS Stainless Steel C Connection Size M8 M10 M12 M13 M14 F14 M15 F15 M3/8 F3/8 M1/2 F1/2 M9/16 F9/16 M3/4 F3/4 D Hose Size 006 DN6 008 DN8 010 DN10 XXX Length (mm) 150-1500

Manufacturer:: Kaiping Haodi Sanitary Ware Technology Co., Ltd

Company Name
Kaiping Haodi Sanitary Ware Technology Co., Ltd
Address
Block 1, No. 25 Jiaxing North Road, Shuikou Town, Kaiping, Guangdong
Country
China

View All Listings by this Company

WRAS Approval Number: #241012003

Stainless steel braided or nylon braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 Bar Maximum operating temperature 85 °C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 241012003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model
Marking:: KITA, PEX, DATE OF MANUFACTURE YYYY & WRAS ON CRIMPED CONNECTION
Installation Requirements:: R001 R008
Expiry date:: 31/10/2029
Model:: KITA PEX-A-B-C-B-C-D-XXX A Outer Braiding SS Stainless Steel Braided NP Nylon Braided B Connection Material BR Brass SS Stainless Steel C Connection Size M8 M10 M12 M13 M14 F14 M15 F15 M3/8 F3/8 M1/2 F1/2 M9/16 F9/16 M3/4 F3/4 D Hose Size 006 DN6 008 DN8 010 DN10 XXX Length (mm) 150-1500

Approval Holder:: Ka Shing Enterprises (H.K) Ltd

Company Name
Ka Shing Enterprises (H.K) Ltd
Address
Flat A, 3/F Waylee Industry Center 30-38 Tsuen King Circuit Tsuen Wan
Country
Hong Kong

View All Listings by this Company