Range of brass and copper fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 18.6 bar. Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011341

Size:

See model

Marking:

Endex Logo or Endbraze on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

N1 Straight Coupling: 88030 - 67mm 89600 - 76mm 89601 - 108mm 89697 - 133mm 89698 - 159mm B12 Elbow: 88456 – 67mm 89619 – 76mm N61 Stop End: 89090 – 67mm 89694 – 76mm 89695 – 108mm N69P Straight Male Union Connector: 89253 – 67mm N1IM Met x Imp Adaptor Coupling: 89617 – 76mm x 3” 89618 – 108mm x 4” N18 Slow Bend: 89639 – 67mm 89640 – 76mm 89741 – 108mm 89709 – 133mm 89710 – 159mm N1FMGI Bi-Metal Flange: 88028 – 42mm (4 holes) 88029 – 54mm (4 holes) 88114 – 67mm (4 holes) 89603 – 76mm (8 holes) 89604 – 108mm (8 holes) 89602 – 133mm (8 holes) 89719 – 159mm (8 holes) N3 Straight Male Connector: 88200 – 67mm x 2 ½” 89615 – 76mm x 3” 89616 – 108mm x 4” N21 Obtuse Elbow: 88653 – 67mm 89645 – 76mm 89646 – 108mm 89711 – 133mm 89712 – 159mm N1FMB Gunmetal Flange: 89605 – 76mm (8 holes) N6 Reducer: 88310 – 67mm x 28mm 88311 – 67mm x 35mm 88312 – 67mm x 42mm 88313 – 67mm x 54mm 89624 – 76mm x 35mm 89625 – 76mm x 42mm 89626 – 76mm x 54mm 89627 – 76mm x 67mm 89630 – 108mm x 42mm 89631 – 108mm x 54mm 89632 – 108mm x 67mm 89633 – 108mm x 76mm 89699 – 133mm x 42mm 89700 – 133mm x 54mm 89701 – 133mm x 67mm 89702 – 133mm x 76mm 89703 – 133mm x 108mm 89704 – 159mm x 54mm 89705 – 159mm x 67mm 89706 – 159mm x 76mm 89707 – 159mm x 108mm 89708 – 159mm x 133mm N24 Equal Tee: 88719 – 67mm 89648 – 76mm 89649 – 108mm 89713 – 133mm 89714 – 159mm N25 Tee Reduced Branch: 88807 – 67mm x 67mm x 28mm 89055 – 67mm x 67mm x 35mm 89056 – 67mm x 67mm x 42mm 89057 – 67mm x 67mm x 54mm 89058 – 76mm x 76mm x 28mm 89000 – 76mm x 76mm x 35mm 89654 – 76mm x 76mm x 42mm 89001 – 76mm x 76mm x 54mm 89059 – 108mm x 108mm x 35mm 89660 – 108mm x 108mm x 54mm 89002 – 108mm x 108mm x 76mm 89715 – 133mm x 133mm x 54mm 89716 – 133mm x 133mm x 108mm 89717 – 159mm x 159mm x 54mm 89718 – 159mm x 159mm x133mm

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of capillary end feed bronze fittings for use with copper tube (manufactured to BS EN 1057). 15mm – 54mm fittings have a maximum working pressure of 25.0 bar. 67mm – 108mm fittings have a maximum working pressure of 16.0 bar. Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2105306

Size:

15mm – 108mm.

Marking:

Kembla & size on body.

Installation Requirements:

R001

Expiry date:

31/05/2026

Model:

FEN – Female 90° Elbow 15mm x 1/2” code FEN015 22mm x 1/2” code FEN02215 22mm x 3/4" code FEN022 28mm x 1” code FEN028 MEN – Male 90° Elbow 15mm x 1/2" code MEN015 FTE – Female Tee 22mm x 1/2" code FTE02215 35mm x 3/4" code FTE03522 42mm x 3/4" code FTE04222 42mm x 1” code FTE04228 54mm x 3/4" code FTE05422 54mm x 1” code FTE05428 FCE – Female Cross Tee 35mm x 3/4" code FCE03522 42mm x 3/4" code FCE04222 42mm x 1” code FCE04228 54mm x 3/4” code FCE05422 54mm x 1” code FCE05428 FCC – Female Coupler 15mm x 1/2" code FCC015 22mm x 3/4” code FCC022 28mm x 1” code FCC028 35mm x 1-1/4” code FCC035 42mm x 1-1/2” code FCC042 54mm x 2” code FCC054 67mm x 2-1/2” code FCC067 BTR – Reducing Coupling 22mm x 1/2" code BTR022 MCC – Male Coupler 15mm x 1/2" code MCC015 22mm x 3/4” code MCC022 28mm x 1” code MCC028 35mm x 1-1/4” code MCC035 42mm x 1-1/2” code MCC042 54mm x 2” code MCC054 67mm x 2-1/2” code MCC067 76mm x 3” code MCC076 108mm x 4” code MCC108

Product Images

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101807

Size:

SEE MODEL

Marking:

Hastings Copper Industries (Brand of Metalica SA) double triangle logo & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Hastings Copper Socket: (HEFC-15, 15mm; HEFC-L-15, 15mm; HEFC-22, 22mm; HEFC-L-22, 22mm; HEFC-L-28 28mm; HEFC-28, 28mm; HEFC-35, 35mm; HEFC-42,42mm; HEFC-54, 54mm;) Hastings Copper Bend 90o MF: HEFESL-12:12mm. HEFESL-15:15mm. HEFESL-18:18mm. HEFESL-22:22mm. HEFESL-28:28mm. HEFESL-35:35mm. HEFESL-42:42mm. HEFESL-54:54mm Hastings Copper Elbow FF: HEFE-15, 15mm; HEFE-L-15, 15mm; HEFE-22, 22mm;HEFE-L-22, 22mm; HEFE-28, 28mm; HEFE-L-28, 28mm;HEFE-35,35mm;HEFE-42, 42mm; HEFE-54,54mm; Hastings Copper 45° Elbow FF:HEFE/45-15, 15mm; HEFE/45-22,22mm; HEFE/45-28, 28mm;HEFE/45-35, 35mm; HEFE/45-42, 42mm; HEFE/45-54, 54mm; Hastings Copper 90 Elbow MF:HEFES-15, 15mm;HEFES-L-15, 15mm;HEFES-22, 22mm;HEFES-L-22, 22mm;HEFES-28, 28mm; HEFES-L-28, 28mm;HEFES-35, 35mm; HEFES-42, 42mm; HEFES-54,54mm; Hastings Copper 45° Elbow MF:HEFES/45-15, 15mm; HEFES/45-22,22mm; HEFES/45-28, 28mm;HEFES/45-35, 35mm; HEFES/45-42, 42mm;HEFES/45-54, 54mm) Hastings Copper Tee:HEFET-15, 15mm; HEFET-L-15, 15mm; HEFET-22,22mm; HEFET-L-22, 22mm;HEFET-28, 28mm; HEFET-L-28, 28mm; HEFET-35,35mm; HEFET-42, 42mm; HEFET-54, 54mm; Hastings Copper Reducing Tee;HEFRT-151015;15x10x15mm; HEFRT-151508, 15x15x8mm; HEFRT-151510,15x15x10mm; HEFRT-151512, 15x15x12mm; HEFRT-151522, 15x15x22mm; HEFRT-221515, 22x15x15mm;HEFRT-221522, 22x15x22mm; HEFRT-L-221522, 22x15x22mm; HEFRT-222210, 22x22x10mm; HEFRT-222215, 22x22x15mm; HEFRT-L-222215,22x22x15mm; HEFRT-222228, 22x22x28mm; HEFRT-281515, 28x15x15mm;HEFRT-281522, 28x15x22mm; HEFRT-281528, 28x15x28mm; HEFRT-282215,28x22x15mm; HEFRT-282222, 28x22x22mm; HEFRT-282228, 28x22x28mm;HEFRT-282815, 28x28x15mm; HEFRT-282822, 28x28x22mm; HEFRT-282835,28x28x35mm; HEFRT-352222, 35x22x22mm; HEFRT-352235, 35x22x35mm;HEFRT-352822, 35x28x22mm; HEFRT-352828,35x28x28mm; HEFRT-352835,35x28x35mm; HEFRT-353515, 35x35x15mm; HEFRT-353522, 35x35x22mm;HEFRT-353528, 35x35x28mm; HEFRT-422828, 42x28x28mm; HEFRT-422842,42x28x42mm; HEFRT-423535, 42x35x35mm; HEFRT-423542, 42x35x42mm;HEFRT-424215, 42x42x15mm; HEFRT-424222, 42x42x22mm; HEFRT-424228,42x42x28mm; HEFRT-424235, 42x42x35mm; HEFRT-544254, 54x42x54mm;HEFRT-545415, 54x54x15mm; HEFRT-545422, 54x54x22mm; HEFRT-545428,54x54x28mm; HEFRT-545435, 54x54x35mm; HEFRT-545442, 54x54x42mm; Hastings Copper Plug:HEFEC-15, 15mm; HEFEC-L-15, 15mm; HEFEC-22,22mm; HEFEC-L-22, 22mm; HEFEC-28, 28mm; HEFEC-35, 35mm; HEFEC-42,42mm;HEFEC-54, 54mm; Hastings Copper Reducer CXFTG:HEFFR-1510, 15x10mm;HEFFR-L-1510, 15x10mm;HEFFR-1512, 15x12mm; HEFFR-2215, 22x15mm; HEFFR-L-2215, 22x15mm;HEFFR-2815,28x15mm; HEFFR-2822,28x22mm; HEFFR-L-2822, 28x22mm; HEFFR-3515,35x15mm; HEFFR-3522, 35x22mm; HEFFR-3528,,35x28mm; HEFFR-4215,42x15mm; HEFFR-4222, 42x22mm; HEFFR-4228, 42x28mm; HEFFR-4235,42x35mm; HEFFR-5415, 54x15mm; HEFFR-5422, 54x22mm;HEFFR-5428,54x28mm; HEFFR-5435,,54x35mm; HEFFR-5442, 54x42mm; Hastings Copper Bend 90o MF: HEFE-L-12:12mm.HEFE-L-15:15mm.HEFE-L-18:18mm.HEFE-L-22:22mm.HEFE-L-28:28mm.HEFE-L-35:35mm.HEFE-L-42:42mm.HEFE-L-54:54mm.

Product Images

Approval Holder:

Metalica SA

Company Name

Metalica SA

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112302

Size:

see models

Marking:

Hengshen logo (HS) and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

End feed fittings: 5090 (90°Elbow Close Ruff CxC) 6,8,10,12,15,22,28,35,42,54mm 5092 (90°Street Elbow Close Ruff) 6,8,10,12,15,22,28,35,42,54mm 5090R (Reducing 90° Elbow C×C) 12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28; 5041 (45°Elbow C×C) 6,8,10,12,15,22,28,35,42,54mm 5040 (45°Elbow FTG×C) 6,8,10,12,15,22,28,35,42,54mm 5002A (90°Elbow Long TurnC×C) 6,8,10,12,15,22,28,35,42,54mm 5001A (90°Street Elbow Long Turn Ftg×C) 6,8,10,12,15,22,28,35,42,54mm 5130 (Equal Tee C×C×C) 6,8,10,12,15,22,28,35,42,54mm 5130R (Reducing TEE C×C×C) 6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12, 15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 22×15×12, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15, 35×35×28, 35×35×22, 35×35×15, 35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35, 42×42×28, 42×42×22, 42x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22, 54×54×15,54×42×54, 54×35×54 5270 (Equal Coupling C×C) 6,8,10,12,15,22,28,35,42,54mm 5240 (Reducing Coupling C×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5243 (Fitting Reducer Ftg×C) 8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 5301 (Tube Cap) 6,8,10,12,15,22,28,35,42,54mm 5060 (Return Bend C×C) 6,8,10,12,15,22,28,35,42,54mm 5085 (Cross Over Coupling C×C) 15, 22mm 5086 (Partial Cross Over Ftg×C) 15, 22mm 5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" 5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4”, 22×1",28×1" Solder ring fittings: SR5090 (90°Elbow Close Ruff C×C) 8,10,12,15,22,28,35,42,54mm SR5092 (90°Street Elbow Close Ruff Ftg×C) 15,22,28mm SR5090R (Reducing 90° Elbow C×C) 22×15, 28×22, 28×15 SR5041 (45°Elbow C×C) 8,10,12,15,22,28,35,42,54mm SR5040 (45°Elbow FTG×C) 15,22,28mm SR5130 (Equal Tee C×C×C) 8,10,12,15,22,28,35,42,54mm SR5130R (Reducing TEE C×C×C) 15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15 SR5270 (Equal Coupling C×C) 8,10,12,15,22,28,35,42,54mm SR5240 (Reducing Coupling C×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5243 (Fitting Reducer Ftg×C) 10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15 SR5301 (Tube Cap) 8,10,12,15,22,28,35,42,54mm SR5085 (Cross Over Coupling C×C) 15,22mm SR5086 (Partial Cross Over Ftg×C) 15,22mm SR5062 (Straight Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4” SR5063 (Bent Tap Connector C×FI) 15×1/2”, 15×3/4”, 22×3/4

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co Ltd

Company Name

Ningbo Hengsheng Pipe Fitting Co Ltd

Address

No. 28 West Jinshui Road, Ninghai, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

‘Endex’ range of copper alloy and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2202701

Marking:

Endex (brand of Pegler Yorkshire Ltd.) and size on body

Installation Requirements:

R001

Expiry date:

28/02/2027

Model:

Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company