Water Regulations Approval Scheme Ltd

PENTAX INDUSTRIES SpA Approvals

WRAS Approval Number: #241002708

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002708
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Pentax logo, model code and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #241002722

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Foras (Brand of Pentax), model code and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #250702722

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702722
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3, U5, P3 or P5: 1” BSP (F) inlet x 1” BSP (F) outlet. U7 or P7: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 or P9: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 or P18: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Ultra Models: Pentax logo and other technical data on data plate on body. Plus Models: Foras logo (brand of Pentax SpA) and other technical data on data plate on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. PLUS range: P 3 – XX/Y, P 5 – XX/Y, P 7 – XX/Y, P 9 – XX/Y, P 3 – XX/Y T, P 5 – XX/Y T, P 7 – XX/Y T, P 9 – XX/Y T, P 18 – XX/Y T. Where: U or P = model type. U = ULTRA, P = PLUS. 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3 or P3 (single or three phase): 50-150. U5 or P5 (single or three phase): 70-200. U7 or P7 (single phase): 100-300. U7 or P7 (three phase): 100-350. U9 or P9 (single or three phase): 100-250. U18 or P18 (three phase only): 180-400. Y = Number of impellers. U3, U5, P3 or P5 (single or three phase): 2-7 stages. U7 or P7 (single phase): 2-6 stages. U7 or P7 (three phase): 2-7 stages. U9 or P9 (single or three phase): 2-5 stages. U18 or P18 (three phase only): 2-4 stages. Blank or T = motor: blank = single phase, T = 3 phase

Product Images

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company
Manufacturer:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company

WRAS Approval Number: #251202716

Range of electric water pumps, with stainless steel bodies, shaft and either stainless steel or plastic impellors. Maximum working pressure 8.5 Bar. Maximum operating temperature: See models.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 251202716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1” BSP (F)
Marking:: Ultra models = Pentax logo, model and technical data on data plate on body Plus models = Foras logo, model and technical data on data plate on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: U 3A-90/4; U 3A-100/5 - 35 °C U 5A-120/4; U 5A-150/5 - 35 °C U 3A-90/4 T; U 3A-100/5 T - 35 °C U 5A-120/4 T; U 5A-150/5 T - 35 °C P 3A-90/4; P 3A-100/5 - 35 °C P 5A-120/4; P 5A-150/5 - 35 °C P 3A-90/4 T; P 3A-100/5 T - 35 °C P 5A-120/4 T; P 5A-150/5 T - 35 °C U 3SA-90/4; U 3SA-100/5 - 80 °C U 5SA-120/4; U 5SA-150/5 - 80 °C U 3SA-90/4 T; U 3SA-100/5 T - 80 °C U 5SA-120/4 T; U 5SA-150/5 T - 80 °C P 3SA-90/4; P 3SA-100/5 - 80 °C P 5SA-120/4; P 5SA-150/5 - 80 °C P 3SA-90/4 T; P 3SA-100/5 T - 80 °C P 5SA-120/4 T; P 5SA-150/5 T - 80 °C

Approval Holder:: PENTAX INDUSTRIES SpA

Company Name
PENTAX INDUSTRIES SpA
Address
Viale dell’Industria 1 Veronella
Postcode
37040
Phone
+39 0442 489567
General Email
g.cengia@pentax-pumps.it

View All Listings by this Company