BAGNODESIGN (SANIPEXGROUP) Approvals


#2012091

AQUAECO WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2012091
Size:
½” BSP (M)
Marking:
AQUAECO & model number on cistern body.
Installation Requirements:
R001 R556
Expiry date:
31/12/2025
Model:
AQP-K210-A01-ESG2 WC concealed dual flushing cistern Frame included AQP-K210-D03-ESG2 WC concealed dual flushing cistern No frame

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2103007

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow aerator. The AQE-DIP-301-CP model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2103007
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½ ” BSP captive nut end connections.
Marking:
Aquaeco on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2026
Model:
AQE-DIP-301-CP (with pop-up waste) AQE-DIP-301S-CP (without pop-up waste)

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2210375

Single hole, single outlet (fixed) combination tap assemblies (brass body- various finishes) incorporating a ceramic cartridge headwork with various operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2210375
Size:
Stainless steel braided, PEX lined flexible hose assembly incorporating ½” BSP (F) captive nut.
Marking:
AQUAECO ON TAP BODY
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
AQM-CND-302S-CP (Chrome Plated) CONRAD MONO TALL SMOOTH BODIED BASIN MIXER AQM-CND-302S-MB (Matt Black) CONRAD MONO TALL SMOOTH BODIED BASIN MIXER

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2212352

Range of single hole, single outlet fixed combination tap assemblies (brass body - various finishes), incorporating a ceramic cartridge headwork with either a single lever or cross top operating member. The spout outlets incorporate a plastic aerator. Products are supplied with PEX inner-lined grey plastic braided inlet hoses. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2212352
Size:
½” BSP captive nut.
Marking:
Bagnodesign on tap body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2027
Model:
BDM-CLI-401S-CP (Chrome Plated), BDM-CLI-401S-NB (Brushed Nickel), C-LINE SINGLE, BDM-MLP-301S-CP (Chrome Plated), BDM-MLP-301S-MG (Matt Grey), BDM-MLP-301S-NB (Brushed Nickel), BDM-MLP-301S-MB (Matt Black) M-LINE PROJECT Model added January 2024 PROJECT MONO BASIN MIXER BDM-PRO-111183-A-XX XX’ denotes finish and is replaced with: Chrome Brushed Nickel Matt Black Anthracite Lacquered Zanzibar Gold PVD Gold Soft Bronze Santiago Oyster Burgundy

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2303372

Series of wall mounted, thermostatic mixer valve with brass bodies, diverter headwork that controls flow between one, two or three outlets (see model) with various type of operating member. The temperature is controlled independently via a thermostatic cartridge operating member with a manual override button. Inlets incorporate a stainless-steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 55°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2303372
Size:
¾” BSP(F)
Marking:
Bagnodesign on backplate
Installation Requirements:
R001 R040
Expiry date:
31/03/2028
Model:
BDM-UNI-T301-CON-CP (CHROME PLATED) BDM-UNI-T301-CON-NB (BRUSHED NICKEL) BDM-UNI-T301-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 1 OUTLET BDM-UNI-T302-CON-CP (CHROME PLATED) BDM-UNI-T302-CON-NB (BRUSHED NICKEL) BDM-UNI-T302-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 2 OUTLETS BDM-UNI-T303-CON-CP (CHROME PLATED) BDM-UNI-T303-CON-NB (BRUSHED NICKEL) BDM-UNI-T303-CON-MB (MATT BLACK) UNIVERSAL CONCEALED PART FOR THERMOSTATIC SHOWER MIXER WITH 3 OUTLETS

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 8

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.