KWC DVS Ltd. Approvals


#250502024

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies, various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail (see models). Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
250502024
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tails (10mm spigot) or the braided hose (15mm spigot), this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression
Marking:
DVS logo on body
Installation Requirements:
R001 R006 R007 R010
Expiry date:
31/05/2030
Model:
Aquarius A32: AT03-001 (Stainless steel and braided hose) AT03-002 (Stainless steel and copper tails) AT03-003 (Polished stainless steel and braided hose) AT03-004 (Polished stainless steel and copper tails) Aquarius A45: AT03-011 (Stainless steel and braided hose) AT03-012 (Stainless steel and copper tails) AT03-013 (Polished stainless steel and braided hose) AT03-014 (Polished stainless steel and copper tails) Aquarius A45 Doc M: AT03-021 (Stainless steel and braided hose) AT03-022 (Stainless steel and copper tails) AT03-023 (Polished stainless steel and braided hose) AT03-024 (Polished stainless steel and copper tails) Aquarius Short Neck: AT03-031 (Stainless steel and braided hose) AT03-032 (Stainless steel and copper tails) AT03-033 (Polished stainless steel and braided hose) AT03-034 (Polished stainless steel and copper tails) Aquarius High Neck: AT03-041 (Stainless steel and braided hose) AT03-043 (Polished stainless steel and braided hose) Aquarius Pillar Tap: AT03-051 (Chrome and braided hose) AT03-061 (Chrome and braided hose)

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company
Manufacturer:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#251104020

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum operating pressure 8 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251104020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression.
Marking:
DVS on body.
Installation Requirements:
R001 R010
Expiry date:
30/11/2030
Model:
AT02-001, AT02-002, AT02-003, AT02-005, AT02-006, AT02-011, AT02-012, AT02-013, AT02-015, AT02-016, AT02-021, AT02-022, AT02-023, AT02-025, AT02-026.

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval


#251202017

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless brass body). Flow is controlled by a solenoid valve and is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
251202017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tail (10mm), or the stainless-steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression inlets
Marking:
DVS logo on body
Installation Requirements:
R001 R006 R007
Expiry date:
31/12/2030
Model:
AT01-001 Classic tap spout in chrome with pex tails AT01-002 Classic tap spout in chrome with copper tails AT01-003 Classic tap spout only in chrome stainless tails AT01-011 Classic Swan tap spout in chrome with pex tails AT01-012 Classic Swan tap spout in chrome with copper tails AT01-013 Classic Swan tap spout only in chrome stainless tails

Approval Holder:
KWC DVS Ltd.
Company Name
KWC DVS Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW
Phone
01246 458 900
General Email
richard.lamb@kwc.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.