SAPAG VALVES Approvals


#2307049

Range of wafer, lugged and double bridge type butterfly valves with blue epoxy coated ductile iron bodies, stainless steel or blue epoxy coated ductile iron discs and EPDM seats. JMC 31300/71300/61300 and PAR W/L/DF.112 models have stainless steel discs (DN50 to 250: ASTM CF3 M (1.4409) DN>250 ASTM CF8M (1.4408)); all other models have blue epoxy coated ductile iron discs. All valves are bare shaft without an operating member. Maximum working pressure 25.0 bar. Maximum operating temperature: JMC 31V00/71V00/61V00, PAR W/L/DF.P07 and PAR W/L/DF.112 models are 50°C. JMC 31W00/71W00/61W00 and PAR W/L/DF.P08 models are cold water use only.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2307049
Size:
Wafer and Lugged: DN50 - 1000 flanged. Double bridged: DN500 - 1000 flanged.
Marking:
JMC models: SAPAG, JMC, SAPAG sales code (e.g., 31V00), size, maximum pressure, maximum temperature, year of manufacture followed by production order no. (YY/production order no.) and SAPAG on data plate on body. PARASEAL models: KEYSTONE, PARASEAL, trim (e.g., W.P07), size, maximum pressure, maximum temperature, Keystone sales code, year of manufacture followed by production order no. (YY/production order no.) and SAPAG on data plate on body.
Installation Requirements:
R001
Expiry date:
31/07/2028
Model:
JMC - SAPAG Branded: JMC 31300 (Wafer), JMC 61300 (Lugged), JMC 71300 (Double flanged). JMC 31V00 (Wafer), JMC 61V00 (Lugged), JMC 71V00 (Double flanged), JMC 31W00 (Wafer), JMC 61W00 (Lugged), JMC 71W00 (Double flanged). PARASEAL - KEYSTONE branded: PAR W.112 (31300) (Wafer), PAR L.112 (71300) (Lugged), PAR DF.112 (61300) (Double flanged), PAR W.P07 (31V00) (Wafer), PAR L.P07 (71V00) (Lugged), PAR DF.P07 (61V00) (Double flanged), PAR W.P08 (31W00) (Wafer), PAR L.P08 (71W00) (Lugged), PAR DF.P08 (61W00) (Double flanged).
Product Images

Approval Holder:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company
Manufacturer:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

Print This Approval


#2304363

Range of resilient seated gate valves with cast iron bodies (blue epoxy coated), EPDM coated cast iron wedges and a handwheel operating member. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2304363
Size:
DN50 - DN400.
Marking:
FAMAT (Brand of Sapag), WRAS, size (DN) & PN on body.
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
GS

Approval Holder:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

Print This Approval


#2307075

Range of wafer and lugged butterfly valves with blue epoxy coated ductile iron bodies and stainless steel disc. DN50-DN300 are lever operated and DN350 – DN600 are handwheel operated. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2307075
Size:
DN50, DN60, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500 & DN600 Flanged
Marking:
FAMAT (Brand of Sapag), model and technical info on dataplate on body. Size and pressure on body
Installation Requirements:
R001
Expiry date:
31/07/2028
Model:
BC1 (Wafer Type) BC2 (Lug Type)

Approval Holder:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

Print This Approval


#240602033

Range of blue epoxy coated ductile iron dismantling fittings with EPDM sealing rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
240602033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50 to DN1200 Flanged
Marking:
FAMAT, Sapag-valves.com, model and technical information on data plate on body
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
DJ1 Dismantling Joint
Product Images

Approval Holder:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

Print This Approval


#240602070

Range of butterfly valves with blue epoxy coated, ductile iron bodies and either blue epoxy coated ductile iron or stainless-steel discs and EPDM seats and ‘O’-rings. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
240602070
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000 & DN1200 Flanged
Marking:
Famat (Brand of SAPAG), Model, Size and PN on metal dataplate on body.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
JMC BC3 LB

Approval Holder:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.