Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK) Approvals


#2106547

'RVK EPDM EP 210107'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2106547
Expiry date:
30/06/2026
Manufacturer:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#1906586

'RVK SW-02'. Factory applied, grey coloured cement mortar. Mix cement: sand: water in a weight ratio of 1:2.0:0.4 Cure for 4 hours at room temperature and then 6 hours steam cure@50°C. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
1906586
Expiry date:
30/06/2024
Model:
Manufacturer:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#1907413

Range of non-rising spindle gate valves with epoxy coated ductile iron body and wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 80°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
1907413
Expiry date:
31/07/2024
Size:
DN40 - DN300.
Marking:
RVK, DN & PN ON BODY
Installation Requirements:
R001
Model:
RVK GVU101
Factor:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#2203060

Range of gate valves incorporating blue epoxy coated ductile iron body and EPDM coated wedge. The valves operate via a non-rising spindle headwork with hand wheel operating member. Maximum working pressure 17.24 bar. Maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2203060
Expiry date:
31/03/2027
Size:
DN50 to DN300 flanged (2” to 12”)
Marking:
RVK, size, "250W" and WRAS on body.
Installation Requirements:
R001
Model:
S14 AWWA C515 Resilient Seated Gate Valves
Factor:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#2207384

Range of butterfly valves incorporating blue epoxy coated ductile iron bodies and discs. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2207384
Expiry date:
31/07/2027
Size:
DN150, 200, 300 & 400.
Marking:
RVK, DN & PN on body.
Installation Requirements:
R001
Model:
BFVECC101 range
Factor:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#1909130

Range of wafer butterfly valves with ductile iron bodies (blue epoxy coating) stainless steel discs and EPDM seats. Supplied with a rotating wheel operating member. Maximum working pressures:16.0 bar for DN40 – DN500 and 10.0 bar for DN600 – DN1200. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
1909130
Expiry date:
30/09/2024
Size:
DN40 - DN1200 flanged inlet/outlet
Marking:
RVK, WRAS, DN, PN, model, date of manufacture (MMYYYY) and product info on data plate on body. PN and DN on body.
Installation Requirements:
R001
Model:
BFVECC101
Factor:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#2306921

Range of gate valves with blue epoxy coated ductile iron bodies and EPDM coated ductile iron wedges. The valves operate via non-rising spindle headwork. Maximum working pressure 10.0 bar and 16.0 bar (dependent on flange pressure rating). Maximum operating temperature 80°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2306921
Expiry date:
30/06/2028
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 - Flanged
Marking:
RVK, DN & PN on body.
Installation Requirements:
R001
Model:
GVF101
Factor:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


#2306922

Range of gate valves with blue epoxy coated ductile iron bodies and EPDM coated ductile iron wedges. The valves operate via non-rising spindle headwork. Maximum working pressure 16.0 bar and a maximum operating temperature 85°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2306922
Expiry date:
30/06/2028
Size:
DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 Flanged
Marking:
RVK, DN & PN on body.
Installation Requirements:
R001
Model:
GVU101
Factor:
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Company Name
Mohamed Ramadan Shat Factory for Engineering & Metal Industries (RVK)
Address
King Abdullah Economic City, Industrial Valley Plot No. 1B-20, Rabigh

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.