Pedrollo S.p.A. Approvals

#2105028

Range of pump units with plastic bodies and impellers, EPDM ‘O’-rings, expansion vessel with an EPDM membrane and a carbon graphite/ceramic/NBR shaft seal (bt-ar 13 bx 4ff xp). Each pump inlet incorporates a non-return valve. Single versions are standalone pumps, twin versions also include stainless steel manifolds. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2105028
Size:
1” BSP (M) to pump. 1½” BSP (F) to manifold (twin models only).
Marking:
Pedrollo on body. Model, PN, max temp, date of manufacture within serial number (DGP YY MM x xxx) and other technical info on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/05/2026
Model:
Single pump booster set: DGPED 3 (Pedrollo) DGPED 5 (Pedrollo) Twin pump booster set with manifold: Gruppo 2DGPED 33 (Pedrollo) Gruppo 2DGPED 35 (Pedrollo) Gruppo 2DGPED 55 (Pedrollo) DGPED 3 = single pump, size 3 m³/h (50l/min). DGPED 5 = single pump, size 5 m³/h (83.33l/min). 2DGPED 33 = 2 pumps booster, size 3 m³/h (50l/min) for each pump. 2DGPED 35 = 2 pumps booster, size 3 m³/h (50l/min) for one pump, size 5 m³/h (83.33l/min) for the other pump. 2DGPED 55 = 2 pumps booster, size 5 m³/h (83.33l/min) for each pump.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#2105014

Range of self-priming pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2105014
Size:
1” BSP (F) inlet/outlet.
Marking:
Plurijet and logo on body. PEDROLLO, Plurijet. CE, temperature and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/05/2026
Model:
Plurijetm 3/80, Plurijetm 4/80, Plurijetm 3/100, Plurijetm 4/100, Plurijet 3/80, Plurijet 4/80, Plurijet 3/100, Plurijet 4/100.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#2106012

Range of booster pumps with stainless steel bodies and impellers, EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2106012
Size:
1” BSP (F) inlet/outlet
Marking:
Pedrollo, model number, max. temp and other technical information on data plate on body
Installation Requirements:
R001 R415
Expiry date:
30/06/2026
Model:
Single phase models: JCRm 1C, JCRm 1B, JCRm 1A, JCRm 2C, JCRm 2CL, JCRm 2B, JCRm 2A. Three phase models: JCR 1C, JCR 1B, JCR 1A, JCR 2C, JCR 2CL, JCR 2B, JCR 2A.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#2106013

Range of booster pumps with stainless steel bodies and impellers, EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure 7.0 bar. Cold water use only. From November 2021 maximum operating temperature 60°C

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2106013
Size:
1” BSP (F)
Marking:
PEDROLLO logo on body. PEDROLLO, CE, model number, maximum temperature and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
30/06/2026
Model:
Single phase models: 2CRm 80, 3CRm 80, 4CRm 80, 5CRm 80, 3CRm 100, 4CRm 100, 5CRm 100. Three phase models: 2CR 80, 3CR 80, 4CR 80, 5CR 80, 3CR 100, 4CR 100, 5CR 100.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#2107073

Range of booster pumps with stainless steel bodies and impellers (AISI 304: AL-RED models or AISI 316: CP models), EPDM ‘O’-rings and a ceramic/graphite/EPDM shaft seal. Maximum working pressure: CP(m) 100-130-132-150-158 and AL-RED(m) 600-610-620 models: 6.0 bar. All other models: 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2107073
Size:
1 ¼” BSP (F).
Marking:
Pedrollo, made in Italy, production date and information (YY/production line: number or letter/DDD), maximum temperature and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/07/2026
Model:
Single phase (CPm or AL-REDm) or three phase (CP or AL-RED): CP(m) 100-ST4. CP(m) 130-ST4. CP(m) 132-ST4. CP(m) 150-ST4. CP(m) 158-ST4. CP(m) 170-ST4. CP(m) 170M-ST4. CP(m) 180-ST4. CP(m) 190-ST4. CP(m) 200-ST4. CP(m) 100-ST6. CP(m) 130-ST6. CP(m) 132-ST6. CP(m) 150-ST6. CP(m) 158-ST6. CP(m) 170-ST6. CP(m) 170M-ST6. CP(m) 180-ST6. CP(m) 190-ST6. CP(m) 200-ST6. AL-RED(m) 600 -4. AL-RED(m) 610 -4. AL-RED(m) 620 -4. AL-RED(m) 650 -4. AL-RED(m) 660 -4. AL-RED(m) 670 -4. AL-RED(m) 650M -4. AL-RED(m) 660M -4. AL-RED(m) 670M -4. AL-RED(m) 650L -4. AL-RED(m) 660L -4. AL-RED(m) 670L -4. AL-RED(m) 600 -6. AL-RED(m) 610 -6. AL-RED(m) 620 -6. AL-RED(m) 650 -6. AL-RED(m) 660 -6. AL-RED(m) 670 -6. AL-RED(m) 650M -6. AL-RED(m) 660M -6. AL-RED(m) 670M -6. AL-RED(m) 650L -6. AL-RED(m) 660L -6. AL-RED(m) 670L -6.
Product Images
Approval Holder:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311
General Email
vendite@pedrollo.com

View All Listings by this Company

Print This Approval

#250102716

Range of booster pumps with stainless steel bodies, impellers and non-return valves (not suitable for backflow protection) at the inlets. Maximum working pressure: 6.0 Bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250102716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (M).
Marking:
Pedrollo Spa logo on front panel. Model and product information on adhesive label.
Installation Requirements:
R001 R008 R415
Expiry date:
31/01/2030
Model:
DG-BLU 3, DG PED 3 EVO, DG-BLU 5, DG PED 5 EVO, DUAL DG-BLU 3+3, DUAL DG PED EVO 3+3, DUAL DG-BLU 3+5, DUAL DG PED EVO 3+5, DUAL DG-BLU 5+5, DUAL DG PED EVO 5+5.
Product Images
Manufacturer:
Pedrollo S.p.A.
Company Name
Pedrollo S.p.A.
Address
via Enrico Fermi, 7 37047 San Bonifacio (VR)
Phone
+39 045 6136311

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.