Range of deck mounted, single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc or a quarter turn compression washer headwork with various operating members (see model). The inlet of the quarter turn ceramic disc headwork incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model). The product is supplied with metal backnuts. Maximum working pressure 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

2303058

Size:

½” BSP (M).

Marking:

ENCORE (brand of CHG Europe B.V.) on body and hand spray.

Installation Requirements:

R001 R006

Expiry date:

31/03/2028

Model:

KW 63 X1 X2 X3 X4 X5 X6 S3 (D A X7) K = Encore series. W = WRAS series. 63 = Single hole deck mount single pantry. X1 = 1 - Spring pre-rinse. 5 - Swivel arm pre-rinse - 12” arm length. X2 (Main body headwork) = 0 - Compression. 1 - Ceramic. X3 (Swivel arm support/Spring type) = 0 - W/O Swivel arm P/R support. 1 - W/ Swivel arm P/R support. 6 - Spring chrome plated. 7 - Spring stainless steel. X4 (riser) = 1 - 18” riser (only on spring type pre-rinse). 4 - 32” riser (only on swivel type pre-rinse). X5 (wall bracket) = 1 - Yes X6 (Main body operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle. 5 - 4” Wrist blade. 6 - 6” Wrist blade. S3 - Standard spray valve Optional: D - Add on faucet W/ 12” spout A - 0.5 GPM PCA Spray vandal resistant X7 (Add-on spout operating member) = 1 - Standard lever. 2 - Cross. 3 - Triangle handle. 4 - Designer handle.

Product Images

Approval Holder:

CHG Europe B.V.

Company Name

CHG Europe B.V.

Postcode

THE NETHERLANDS

View All Listings by this Company

Range of chromium plated interlocked, PEX lined shower hoses with EPDM rubber gaskets. Maximum operating pressure: 6.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

240602042

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

7/8-20 UNEF-2B

Marking:

CHG, KW50 or KCW50 (depending on model), Year of production (20xx) and WRAS on ferrule.

Installation Requirements:

R001

Expiry date:

30/06/2029

Model:

KCW50-Y010-XX, KW50-Y010-XX. Where XX denotes the length and can be replaced with any of the following: 20 = 20” length 26 = 26” length 32 = 32” length 44 = 44” length

Product Images

Approval Holder:

CHG Europe B.V.

Company Name

CHG Europe B.V.

Postcode

THE NETHERLANDS

View All Listings by this Company

Range of deck mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a quarter turn ceramic disc or a quarter turn compression washer headwork with various operating members (see model). The inlet of the quarter turn ceramic disc headwork incorporates an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. The product incorporates a handheld pre-rinse spray with a self-closing trigger, either on a flexible hose within an overhead spring or as a fixed length flexible hose on a swivel arm (see model). Models are available with an additional swivel spout outlet, which incorporates a plastic aerator (see model). The swivel spouts have their own flow control in addition to the main headwork, this is also a quarter turn compression washer headwork with various operating members (see model) Maximum working pressure 6 Bar. Maximum operating temperature 65 °C

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.

WRAS Approval Number:

240702072

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Front side of faucet body: Encore logo, series identification & material batch identification number. Spray head: Encore logo & material batch identification number.

Installation Requirements:

R001 R006 R010

Expiry date:

31/07/2029

Model:

Model: KW 60/66 X1 X2 X3 X4 X5 X6 S3 (Y A X7) K = Encore Series W = WRAS series 60 = Deck mount faucet body 8” inlet centres 66 = Deck mount faucet body 6” inlet centres X1 1 = Spring pre-rinse 5 = Swivel arm Pre-rinse 12” arm length X2 0 = Compression 1 = Ceramic X3 1 = W/Swivel arm P/R support 6 = Spring chrome plated 7 = Spring stainless steel X4 1 = 18” Riser (only on spring type pre-rinse) 4 = 32” Riser (only on swivel type pre-rinse) X5 1 = Yes X6 1 = Standard lever 2 = Cross 4 = Designer handle 5 = 4” Wrist Blade 6 = 6” Wrist blade S3 = Standard spray valve Optional: Where Y denotes the add-on spout. A = Add-On Faucet W/6” Spout B = Add-On Faucet W/8” Spout C = Add-On Faucet W/10” Spout D = Add-On Faucet W/12” Spout A= 0.5 GPM max aerated stream vandal resistant X7 1 = Standard lever 2 = Cross 4 = Designer handle

Product Images

Approval Holder:

CHG Europe B.V.

Company Name

CHG Europe B.V.

Postcode

THE NETHERLANDS

View All Listings by this Company