'Jazecoat EP 402'. Site applied, two-component, blue coloured epoxy resin coating. Mix components A & B in a mass ratio of 0.85:0.15. Cure coat 1 for 16 hours@25°C. Cure coat 2 for 7 days@25°C. For use with water up to 30°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2001544

Expiry date:

31/01/2025

Model:

Manufacturer:

JCC (Jazea Construction Chemicals)

Company Name

JCC (Jazea Construction Chemicals)

Address

Exit No. 10 - Al Kharj Road, Riyadh, Kingdom of Saudi Arabia

View All Listings by this Company

'Jazeproof DW'. Site applied, two-component, grey coloured acrylic-modified cementitious coating. Mix components A, B & water in a mass ratio of 0.15:0.85:0.15. Cure for 7 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2001545

Expiry date:

31/01/2025

Model:

Manufacturer:

JCC (Jazea Construction Chemicals)

Company Name

JCC (Jazea Construction Chemicals)

Address

Exit No. 10 - Al Kharj Road, Riyadh, Kingdom of Saudi Arabia

View All Listings by this Company

'Jazecoat EP 400'. Site applied, two-component, blue coloured epoxy resin coating. Mix components A & B in a mass ratio of 4:1. Cure coat 1 for 24 hours@25°C. Cure coat 2 for 7 days@25°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5046 Coatings, Paints & Linings

Section Subtitle:

Site applied cistern coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2001546

Expiry date:

31/01/2025

Model:

Manufacturer:

JCC (Jazea Construction Chemicals)

Company Name

JCC (Jazea Construction Chemicals)

Address

Exit No. 10 - Al Kharj Road, Riyadh, Kingdom of Saudi Arabia

View All Listings by this Company