Range of submersible pressure sensors and hydrostatic transmitters (supplied in lengths up to 1000m). Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

Ø22mm or 32mm (see model).

Marking:

VEGA, VEGAWELL 52, model number and other product information on label connected to cable.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

VEGAWELL 52 WL52.XX α A β γ I δ ε ζ X Where: XX :- Approval Blank/without (not applicable to model seeking WRAS approval). α :- Fastening / Material X4 :- Without GE :- Adjustable screw connection for suspension cable G¾ PN3, ISO228-1 / 316L. GC :- Adjustable screw connection for suspension cable G1 PN3, ISO228-1 / 316L. GD :- Adjustable screw connection for suspension cable 1NPT PN3, ASME B1.20.1 / 316L. GA :- Adjustable screw connection for suspension cable G1½ PN3, ISO228-1 / 316L. GB :- Adjustable screw connection for suspension cable 1½NPT PN3, ASME B1.20.1 / 316L. Version / Process temperature A :- Suspension cable PE / -20...+60°C β :- Length of suspension cable K :- 6m PE suspension cable. L :- 12m PE suspension cable. M :- 27m PE suspension cable. T :- Individually selected length PE suspension cable. γ :- Transmitter material / Diameter V :- 316l / 22mm. D :- Duplex (1.4462) / 32mm. Sealing concept / Wetted seal I :- Double / EPDM (A+P 70.10-02), EPDM (70.503-00) δ :- Measuring rate A :- rel. / 0 … +0.1 bar (0 … + 10kPa). B :- rel. / 0 … +0.2 bar (0 … + 20kPa). C :- rel. / 0 … +0.4 bar (0 … + 40kPa). D :- rel. / 0 … +1.0 bar (0 … + 100kPa). E :- rel. / 0 … +2.5 bar (0 … + 250kPa). F :- rel. / 0 … +5.0 bar (0 … + 500kPa). G :- rel. / 0 … +10 bar (0 … + 1,000kPa). H :- rel. / 0 … +25 bar (0 … + 2,500kPa). ε :- Electronics C :- Two-wire 4…20mA. D :- Two-wire 4…20mA/HART + Four-wire PT100. ζ :- Accuracy class 1 :- 0.2%, 2 :- 0.1%. Transmitter option X :- without.

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company

Range of VEGAPULS radar sensors for level measurement with plastic bodies. Cold water use only. Open outlet use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model key

Marking:

VEGA logo date of manufacturer (YYYY), serial number and other technical data on body

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

PSC21.ab-c-d-N-f-g-h-I VEGAPULS C 21 PSC22.ab-c-d- N -f-g-h-I VEGAPULS C 22 PSC23.ab-c-d- N -f-g-h-I VEGAPULS C 23 PS21.ab-c-d- N -f-g-h-I VEGAPULS 21 PS31.ab-c-d- N -f-g-h-I VEGAPULS 31 KEY FOR VEGAPULS C 21 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; G Thread G1½ / G1 N Thread 1½NPT / 1NPT R Thread R1½ / R1 g = Cable material / Length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 22 ab = Explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignition proof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as: X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS C 23 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, RCM, EAC) VH ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 (Class II, III Division 1, 2) VB ATEX/UKEX/IEC; Gas, Encapsulation, Zone 1, 2 + Dust, Protection by enclosure, Zone 20, 21/22, 21, 22 SH EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 + Dust, intrinsic safety Zone 20, 20/21, 21, 22 SB EAC/SEPRO; Gas, encapsulation, Zone 1, 2 + Dust, encapsulation Zone 21, 22 TH CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, Intrinsic safety, Zone 20, 20/21, 21, 22 (not CCOE) TB CCOE, NEPSI, KTL, TIIS; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 (not CCOE) WH INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 + Dust, intrinsic safety, Zone 20, 20/21, 21, 22 WB INMETRO/IA; Gas, encapsulation, Zone 1, 2 + Dust, protection by enclosure, Zone 20, 21/22, 21, 22 FB c-FM-us/c-CSA-us; Gas, encapsulation, Zone 1, 2 (Class I Division 2) + Dust, protection by enclosure, Zone 20, 20/21, 21, 22 (Class II, III Division 1) FR c-FM-us/c-CSA-us; Gas, non-incendive, Class I Division 2 + Dust-ignitionproof, Class II, III Division 1 c = Approved as overfill protection, which can be displayed as; X without W with (WHG, VLAREM) d = Ship approval, which can be displayed as; X without S with (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff / Pharmaceutical certificate, which can be displayed as; X without N with (NSF/ANSI/CAN 61) P with (NIH) F with (FDA, EG1935/2004) f = Thread process side / Cable side, which can be displayed as; F Thread G1 M Thread 1NPT Q Thread R1 g = Cable material / length, which can be displayed as; A PUR / 5m (approx. 16ft) B PUR / 10m (approx. 32ft) H PUR / 15m (appr. 48ft) J PUR / 20m (appr. 64ft) C PUR / 25m (approx. 82ft) D PUR / individually selectable (acc. to CE, RCM, EAC) D PUR / individually selectable (acc. to c-FM-us, c-CSA-us) h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART W Four-wire Modbus S Three-wire SDI12 i = Sensor setting via smartphone and VEGA Tools app, which can be displayed as; X without B with KEY FOR VEGAPULS 21 / 31 ab = explosion protection, which can be displayed as; XX without, for Ex-free area (CE, UKCA, c-FM-us, c-CSA-us, RCM, EAC) AX without, for Ex-free area (CE, UKCA, RCM) VC ATEX/UKEX/IEC/c-FM-us/c-CSA-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) SC EAC/SEPRO; Gas, intrinsic safety; Zone 0, 0/1, 1, 2 TC CCOE/NEPSI/KTL/TIIS; Gas, Intrinsic safety, Zone 0, 0/1, 1, 2 WC INMETRO/IA; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 c = Approved as overfill protection, which can be displayed as; X Without W With (WHG, VLAREM) d = Ship approval, which can be displayed as; X Without S With (CCS, RINA, NK, ABS, DNV GL, LR, BV) N = Foodstuff/Pharmaceutical certificate, which can be displayed as X Without N With (NSF/ANSI/CAN 61) P With (NIH) F With (FDA, EG1935/2004) f = Process fitting, which can be displayed as; G Thread G1½ N Thread 1½NPT R Thread R1½ g = Cable entry / connection, which can be displayed as; M M20x1.5 / Cable gland PA black (ø5-9mm), standard h = Electronics, which can be displayed as; H Two-wire 4 ... 20 mA/HART i = Sensor setting via smartphone and VEGA Tools app X Without B With

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company

Manufacturer:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company

'Sapphire Ceramic®'. Ivory coloured ceramic disc manufactured by sintering. For use with water up to 23°C.

Section:

5023 Ceramic

Expiry date:

31/03/2029

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company

Range of stainless-steel pressure sensors. Maximum working pressures: B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o (Thread G1): 10.0 bar. B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with METEC - metallic measuring cell: 25.0 bar, B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with Piezoresistive - metallic measuring cell: 40.0 bar. Maximum operating temperature 100°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o: 1” BSP (M). B83.a-b-LF-e-f-g-h-i-j-k-l-m-n-o: ½” NPT (M) & ¼” NPT (F). B83.a-b-D8/N8/D4/CQ/VE/CH-e-f-g-h-i-j-k-l-m-n-o: DN25, DN50 and DN80 flanged.

Marking:

VEGA on body. VEGA model, serial number, date of manufacture (YYYY) and other technical information on adhesive label or data plate on body.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

VEGABAR 83 range: B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o a = Scope: • Not relevant for WRAS approval b = Approval: • Not relevant for WRAS approval cd = Process fitting / Material (NOTE - PN40 indicated below is possible maximum, the actual maximum working pressure is dictated by measuring cell, see entry ‘e’): • Material: 316L, Alloy C276 • Threads o C5: Thread G1, ISO228-1 / 316L (only Piezoresistive - metallic measuring cell) o LF: Thread ½NPT, innen ¼NPT, ASME B1.20.1 / 316L - D8: Flange DN25 PN40 Form C, EN1092-1/ 316/316L (only Piezoresistive - metallic measuring cell) - N8: Flange DN25 PN40 Form B1, EN1092-1 / 316/316L - D4: Flange DN50 PN40 Form C, EN1092-1/ 316/316L - CQ: Flange DN50 PN40 Form B1, EN1092-1 / 316/316L - VE: Flange DN80 PN40 Form C, EN1092-1 / 316/316L - CH: Flange DN80 PN40 Form B1, EN1092-1 / 316/316L e = Process temperature • Is up to the Process fitting and Material Thread C5 -> 3 (EPDM) High Temperature (METEC measuring cell): F, H, or T Low temperature (Piezoresistive - metallic measuring cell): S or E f = Pressure • Relative pressure (measurement against atmosphere) • Absolute pressure (measurement against vacuum) • Relative pressure climate-compensated (measurement against atmosphere) g = Measuring range • Not relevant for WRAS approval (maximum is 40 bar) h = Accuracy class • Different accuracy classes from 0.075 % to 0.20 % i = Electronics • Not relevant for WRAS approval j = Supplementary electronics • Not relevant for WRAS approval k = Housing • Not relevant for WRAS approval l = Housing version / Protection • Not relevant for WRAS approval m = Cable entry / Connection • Not relevant for WRAS approval n = Display/adjustment module PLICSCOM • Not relevant for WRAS approval o = Certificates • M – Yes o Foodstuff/Pharmaceutical certificate: WRAS

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company

Manufacturer:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company

Range of pressure sensors with stainless steel bodies, EPDM ‘O’-ring and ceramic measuring cell. Maximum working pressure 25.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

B82.a-b-LF-e-f-g-h-i-j-k-l-m-n-o-p & B28/B38.ab-c-d-LF-g-h-i-j-k: ½” NPT (M) ¼” NPT inside (F). B82.a-b-CS-e-f-g-h-i-j-k-l-m-n-o-p & B28/B38.ab-c-d-CS-g-h-i-j-k: ½” BSP (M). B82.a-b-C5-e-f-g-h-i-j-k-l-m-n-o-p & & B28/B38.ab-c-d-C5-g-h-i-j-k: 1” BSP (M). B82.a-b-N7/B2/BC/B5/D8/N8/4G/D4/TP/CQ/5O/U8/U6/CH/PX/VE-e-f-g-h-i-j-k-l-m-n-o-p: DN25, DN50 and DN80 flanged.

Marking:

B82 models: VEGA on body. VEGA, model, serial number, date of manufacture (YYYY) and other technical information on adhesive label or data plate on body. B28/38 models: VEGA, serial number, date of manufacture (YYYY) and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

VEGABAR 82 range: B82.a-b-cd-e-f-g-h-i-j-k-l-m-n-o-p a = Scope: A - Europe I - worldwide V - Combination (Europe, world-wide) b = Approval: • X - for Ex-free area • W - Overfill protection (WHG, VLAREM) • M - Ship approval (DNV, BV, ABS, CCS, LR, RINA, ClassNK) • M - Ship approval (DNV, BV, ABS, CCS, LR, RINA, ClassNK) incl. MED • C - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 • U - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + Overfill protection (WHG, VLAR EM) • O - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + Ship approval • O - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + ship approval incl. MED • H - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + II 1D, 1/2D, 1/3D, Ext IIIC T* • T - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + 1/2/-D Ex t IIIC IP67/I66 • E - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 • Z - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + Overfill protection (WHG, VLAREM) • Q - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + Ship approval • Q - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + ship approval incl. MED • J - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + II 1D, 1/2D, 1/3D, 2D Ext IIIC T* • R - ATEX/UKEX II 1D, 1/2D, 1/3D, 2D Ext IIIC T* • S - ATEX/UKEX II 1/2/-D Ex t IIIC IP67/IP66 T* Da/Db/- • C - IEC Ex ia IIC T6 • U - IEC Ex ia IIC T6 + Overfill protection (WHG, VLAREM) • IEC Ex ia IIC T6 + Ship approval • H - IEC Ex ia IIC T6 + IEC Ex t IIIC T* • T - IEC Ex ia IIC T6 + IECEx Ex ia/ia/-, ia/tb ia IIC TX°C Da/Db/-, Da/Db • D - IEC Ex d ia IIC T6 • P - IEC Ex d ia IIC T6 + Ship approval • I - IEC Ex d ia IIC T6 + IEC Ex t IIIC T* • E - IEC Ex d IIC T6 • Q - IEC Ex d IIC T6 + Ship approval • J - IEC Ex d IIC T6 + IEC Ex t IIIC T* • R - IEC Ex t IIIC T* • S - IEC Ex ia/ia/-, ia/tb ia IIIC TX°C Da/Db/-, Da/Db • C - ATEX / IEC II 1G, 1/2G, 2G Ex ia IIC T6 / Ex ia IIC T6 • O - ATEX / IEC II 1G, 1/2G, 2G Ex ia IIC T6 / Ex ia IIC T6 + Ship approval • E - ATEX / IEC II 1/2G, 2G Ex d IIC / Ex d IIC T6 cd = Process fitting / Material (NOTE: PN rating relates to the flange and not the products maximum working pressure): • LF - Thread ½NPT, inside ¼NPT, ASME B1.20.1 / 316L • CS - Thread G½, ISO228-1, inside ø 11.4mm / Duplex (1.4462) • C5 - Thread G1, ISO228-1 / 316L • N7 - Flange DN25 PN40 Form C, DIN2501 / 316/316L • B2 - Flange DN50 PN40 Form C, DIN2501 / 316/316L • BC - Flange DN50 PN40 Form B, DIN2501 / 316/316L • B5 - Flange DN80 PN40 Form C, DIN2501 / 316/316L • D8 - Flange DN25 PN40 Form C, EN1092-1 / 316/316L • N8 - Flange DN25 PN40 Form B1, EN1092-1 / 316/316L • 4G - Flange DN25 PN40 Form B1, EN1092-1 / Duplex (1.4462) • D4 - Flange DN50 PN40 Form C, EN1092-1 / 316/316L • TP - Flange DN50 PN40 Form B1, EN1092-1 / 1.4435 (BN2) • CQ - Flange DN50 PN40 Form B1, EN1092-1 / 316/316L • 5O - Flange DN50 PN40 Form B1, EN1092-1 / Duplex (1.4462) • U8 - Flange DN50 PN40 Form B1, EN1092-1 / 1.4435 (BN2), (Ra<0.38μm) • U6 - Flange DN80 PN40 Form B1, EN1092-1 / 1.4435 (BN2), (Ra<0.38μm) • CH - Flange DN80 PN40 Form B1, EN1092-1 / 316/316L • PX - Flange DN80 PN40 Form B1, EN1092-1 / Duplex (1.4462) • VE - Flange DN80 PN40 Form C, EN1092-1 / 316/316L e = Sealing concept: • D – Double Seal f = Measuring cell seal / Process temperature • D - EPDM • E - EPDM g = Pressure • Relative pressure (measurement against atmosphere) • Absolute pressure (measurement against vacuum) • Relative pressure climate-compensated (measurement against atmosphere) h = Measuring range • Absolute: 0...+0.025 bar to 0...+25.0 bar • Relative: -1...0.0 bar to -1...+25.0 bar i = Accuracy class • Different accuracy classes from 0.05 % to 0.20 % j = Electronics • Z - Two-wire 4 ... 20 mA • H - Two-wire 4 ... 20 mA/HART • U - Four-wire Modbus (converter in second chamber) • A - Two-wire 4 ... 20 mA/HART with SIL qualification • P - Two-wire Profibus PA • F - Two-wire Foundation Fieldbus • S - Secondary electronics for electronic differential pressure • T - Secondary electronics for electronic differential pressure with SIL qualification k = Supplementary electronics • X - without • Z - Additional current output 4 ... 20 mA l = Housing • K - Plastic single chamber • R - Plastic double chamber • A - Aluminium single chamber • D - Aluminium double chamber • V - Stainless steel single chamber (precision casting) • W - Stainless steel double chamber (precision casting) • 8 - Stainless steel single chamber (electropolished) m = Housing version / Protection I - compact / IP66/IP67; TYPE 4X • D - compact / IP66/IP68 (0.2bar); TYPE 6P • P - compact / IP66/IP67; TYPE 4X with M12x1 for VEGADIS 81 • N - compact / IP66/IP68 (1bar); TYPE 6P • M - compact / IP67/IP69 TYPE 4X • A - Axial cable outlet IP68 (PUR) with external housing / IP66/IP67; TYPE 4X • C - Lateral cable outlet IP68 (PUR) with external housing / IP66/IP67; TYPE 4X • K - Axial cable outlet IP68 (PE) with external housing / IP66/IP67; TYPE 4X • L - Lateral cable outlet IP68 (PE) with external housing / IP66/IP67; TYPE 4X • T - Cable outlet / IP66/IP67 TYPE 4X n = Cable entry / Connection • M - M20x1.5 / Cable gland PA black (ø5-9mm), standard • S - M20x1.5 / Cable gland PA black (ø6-12mm) • T - M20x1.5 / Cable gland PA black (ø10-14mm) • K - M20x1.5 / Cable gland PA blue (ø5-9mm) • U - M20x1.5 / Cable gland PA blue (ø6-12mm) • V - M20x1.5 / Cable gland PA blue (ø10-14mm) • L - M20x1.5 / Cable gland stainless steel (ø7-12mm) • O - M20x1.5 / Cable gland brass nickel-plated (ø6-12mm) • 2 - M20x1.5 / Cable gland brass nickel-plated (ø5-9mm) • 9 - M20x1.5 / Cable gland brass nickel-plated SFLU10-M (ø6-12mm) • D - M20x1.5 / Blind plug • 1 - M20x1.5 / without • 6 - M20x1.5 / Cable gland brass nickel-plated; for shielded cable (ø9-13mm) • N - ½NPT / Blind plug • Q - ½NPT / without • J - ½NPT / Cable gland PA black (ø5-9mm) • 8 - ½NPT / Cable gland brass nickel-plated; for reinforced cable (ø9-13mm) • P - ½NPT / Cable gland brass nickel-plated (ø6-12mm) • C - M20x1.5 / Plug connector M12x1, assignment A • B - M20x1.5 / Plug connector M12x1, assignment B • R - M20x1.5 / Plug connector M12x1, assignment C • I - M20x1.5 / Plug connector acc. to ISO4400 • F - M20x1.5 / Plug connector Harting HAN 7D (straight) • G - M20x1.5 / Plug connector Harting HAN 7D (bent) • H - M20x1.5 / Plug connector Harting HAN 8D (straight) • W - M20x1.5 / Plug connector Harting HAN 8D (bent) • Z - ½NPT / Plug 7/8NPT o = Display/adjustment module PLICSCOM • X - without • A - mounted • F - without; lid with inspection window • H - mounted, with heating • B - laterally mounted • K - mounted; with Bluetooth, magnetic pen operation • L - laterally mounted; with Bluetooth, magnetic pen operation p = Certificates • M – Yes o Foodstuff/Pharmaceutical certificate: ▪ WRAS VEGABAR 28 range: B28.ab-c-d-ef-g-h-i-j-k ab = Explosion protection: • XX - for Ex-free area (CE, UKCA, RCM, c-UL-us) • VA - ATEX/UKEX; Gas, increased safety, Zone 2: II 3G Ex ec IIC T4 Gc • VC - ATEX/UKEX/IEC/c-UL-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) • VR - ATEX/IEC/c-UL-us; Gas, intrinsic safety (Class I Division 1,2), Zone 0, 0/1, 1, 2 + dust, protection by enclosure, Zone 20, 20/21, 21 (Class II Division 1) (in preparation: UKEX) • XX - for Ex-free area (EAC) c = Ship approval: • S - with (DNV, LR, ABS, RINA, CCS, NK, BV) • X - without d = Foodstuff/Pharmaceutical certificate • W - with (WRAS) ef = Process fitting / Material: • LF - Thread ½NPT, inside ¼NPT, ASME B1.20.1 / 316L • CS - Thread G½, ISO228-1, inside ø 11.4 mm / Duplex (1.4462) • C5 - Thread G1, ISO228-1; front-flush / 316L g = Measuring cell seal / Process temperature: • D - EPDM h = Measuring range: • Different measuring ranges – both absolute and relative. • Starting from 0…+0.1 bar up to 0…+25.0 bar i = Electrical connection / Protection: • M - M12x1 plastic/ IP66/IP67/IP69 • E - M12x1 stainless steel / IP66/IP67/IP69 • S - 4-pole plug connection ISO4400 M16 / IP65 • K - 4-pole plug connection with hinged cover ISO4400 / IP 65 • T - with direct cable outlet / IP66/IP68 (0.5bar) • V - with direct cable outlet of stainless steel / IP66/68 (0.5bar) j = Electronics: • Z - Two-wire: 4...20 mA • C - Three-wire: transistor, 4...20 mA (active) • A - Three-wire: IO-Link, transistor, 4...20 mA (active) k = Sensor setting via smartphone and VEGA Tools app: • B - with • X - without VEGABAR 38 range: B38.ab-c-d-ef-g-h-i-j-k ab = Explosion protection: • XX - for Ex-free area (CE, UKCA, RCM, c-UL-us) • VC - ATEX/UKEX/IEC/c-UL-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) • XX - for Ex-free area (EAC) c = Ship approval: • S - with (DNV, LR, ABS, RINA, CCS, NK, BV) • X - without d = Foodstuff/Pharmaceutical certificate • W - with (WRAS) ef = Process fitting / Material: • LF - Thread ½NPT, inside ¼NPT, ASME B1.20.1 / 316L • CS - Thread G½, ISO228-1, inside ø 11.4 mm / Duplex (1.4462) • C5 - Thread G1, ISO228-1; front-flush / 316L g = Measuring cell seal / Process temperature: • D - EPDM h = Measuring range: • Different measuring ranges – both absolute and relative. • Starting from 0…+0.1 bar up to 0…+25.0 bar i = Electrical connection / Protection: • M - M12x1 / IP66/IP67 • S - 4-pole plug connection ISO4400 M16 / IP65 • K - 4-pole plug connection with hinged cover ISO4400 / IP 65 j = Electronics: • Z - Two-wire: 4...20 mA • C - Three-wire: transistor, 4...20 mA (active) • A - Three-wire: IO-Link, transistor, 4...20 mA (active) k = Sensor setting via smartphone and VEGA Tools app: • B - with • X - without

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

General Email

info.de@vega.com

View All Listings by this Company