Pillar tap with brass body (various finishes), incorporating a quarter turn ceramic disc headwork and cross top operating member. The spout outlet incorporates an aerator. Maximum working pressure 10.0 bar. Maximum operating temperature is 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2010002

Expiry date:

31/10/2025

Size:

3/8” (F) Compression

Marking:

AXOR on body.

Installation Requirements:

R001 R006

Model:

16 530 xxx AXOR Montreux Pillar tap 50 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (waterfall spout) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The inlets incorporate a stainless-steel strainer and the product is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011012

Expiry date:

30/11/2025

Size:

Stainless steel braided PEX lined flexible hose assemblies with 3/8” captive nuts.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010 R160

Model:

14 127 xxx Hansgrohe Talis Classic Single lever basin mixer 90 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic aerator. Products come with pop up wastes. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2011014

Expiry date:

30/11/2025

Note:

No testing performed on the pop-up waste.

Size:

Stainless steel or nylon braided PEX lined flexible hoses with 3/8” BSP (M) captive nut connections.

Marking:

AXOR on body.

Installation Requirements:

R001 R006 R009 R010

Model:

34 010 xxx AXOR Citterio M with pop-up waste set 34 016 xxx AXOR Citterio M with pop-up waste set 34 017 xxx AXOR Citterio M with waste set 34 127 xxx AXOR Citterio M with waste set.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The products can be supplied with waste outlets (see models). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2201035

Expiry date:

31/01/2027

Note:

No testing performed on pop-up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive end connections.

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R006 R009 R010

Model:

14 042 xxx Hansgrohe Ecos Single lever basin mixer M CoolStart without waste set 31 539 xxx Hansgrohe Focus Single lever basin mixer 70 CoolStart with pop-up waste set 14 080 xxx Hansgrohe Ecos Single lever basin mixer M with pop-up waste set 31 910 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle and pop-up waste set 31 914 xxx Hansgrohe Focus Single lever basin mixer 70 with extra long handle without waste set 31 604 xxx Hansgrohe Focus Single lever basin mixer 70 with push-open waste set 31 730 xxx Hansgrohe Focus Single lever basin mixer 70 with pop-up waste set 31 732 xxx Hansgrohe Focus Single lever basin mixer 70 with chain 31 733 xxx Hansgrohe Focus Single lever basin mixer 70 without waste set 31 951 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow with pop-up waste set 31 952 xxx Hansgrohe Focus Single lever basin mixer 70 LowFlow without waste set Model added August 2023: 31 559 xxx Waterforms Single lever basin mixer M CoolStart with push-open waste set Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Range of ceramic disc diverter cartridges with plastic bodies and silicon ‘O’-rings, for insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

0440 Headworks

WRAS Approval Number:

2203015

Expiry date:

31/03/2027

Size:

32mm OD

Marking:

Hansgrohe on on body

Installation Requirements:

R001

Model:

30 587 500 AUV32 Shut-off and diverter valve 30 727 600 AUV32-1 Shut-off and diverter valve 30 727 610 AUV32-1 Shut-off and diverter valve

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Manual diverter valve controlling the flow to a hand shower or overhead shower, housed within a brass body (various finishes). Incorporating a stainless-steel strainer and approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 70°C.

Section:

2050 Valves

Section Subtitle:

Diverter.

WRAS Approval Number:

2203019

Expiry date:

31/03/2027

Note:

Open outlet use only.

Size:

½” BSP Conical nut on shower hose.

Marking:

Hansgrohe on handset, shower rose and holder.

Installation Requirements:

R001 R040

Model:

26 793 XXX Hansgrohe Croma Select S 280 Shower pipe Reno

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

Range of pillar taps (chromium plated brass), incorporating ceramic cartridge headworks with single lever operating member. Spout oultlet incorporates a plastic aerator. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2212303

Expiry date:

31/12/2027

Size:

Stainless steel braided PEX lines flexible hose assembly incorporating 3/8 captive nut end connection.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R006

Model:

72 503 xxx Hansgrohe Rebris S 72 506 xxx Hansgrohe Rebris E

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company