Dual flush, WC outlet valves. Model A2706 is operated via a push button assembly for either full or reduced flush. Maximum operating temperature. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2011116

Size:

2” BSP (M)

Marking:

Flomasta, WRAS logo on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

5059340756790 5059340756479

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:

2035 Cistern - Flushing

Section Subtitle:

Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.

WRAS Approval Number:

240602716

Size:

½” BSP (M)

Marking:

Flomasta & WRAS on cover, 6 litre line inside cistern.

Installation Requirements:

R001 R280 R556 R581

Expiry date:

30/06/2029

Model:

C10100857 C10100856

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Range of side and bottom entry BS1212-3 inlet valves, with plastic bodies and brass shanks. Maximum working pressure: 3.0 Bar low pressure and 14.0 bar high pressure Maximum operating temperature: Cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

240702710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Flomasta and product code on side of valve. BS1212-3 on nut

Installation Requirements:

R001 R550 R560

Expiry date:

31/07/2029

Model:

C10100844 C10100846

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

Mini shock arrestor with a stainless steel body. Maximum working pressure 15.0 bar . Maximum operating temperature 70°C.

Section:

1000 Expansion Vessels

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Flomasta and technical information on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Maximum working pressure 15.0 bar, 0.16 litre capacity: VAH0368 - 5059340418568 – Flomasta ½”MBSP Mini Shock Arrestor

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

FLOMASTA range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207402

Size:

20mm – 63mm.

Marking:

Flomasta, WRAS, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

FLOMASTA compression fittings 20-63mm 320*****U ADAPTOR MALE FLOMASTA 320A*****U ADAPTOR FEMALE FLOMASTA 320B*****U END PLUG FLOMASTA 320C*****U FLANGED ADAPTOR FLOMASTA 320D*****U FLANGED ADAPTOR (4 BOLTS)FLOMASTA 321******U COUPLING FLOMASTA 321A*****U REDUCING COUPLING FLOMASTA 321B*****U REPAIR COUPLING FLOMASTA 322******U ELBOW 90 FLOMASTA 322A*****U ELBOW THREADED MALE FLOMASTA 322C*****U ELBOW FEMALE for POP-UP FLOMASTA 322B*****U ELBOW THREADED FEMALE FLOMASTA 322D*****U WALL ELBOW COMPRESSION FLOMASTA 323******U TEE THREADED FEMALE FLOMASTA 323A*****U TEE THREADED MALE FLOMASTA 324******U TEE 90° ELYSEE FLOMASTA 324A*****U TEE REDUCING FLOMASTA 321C*****U UNIVERSAL ADAPTOR FLOMASTA Where XXX-YYY-ZZZ for product family cocdes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e altter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company