Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1910063

Expiry date:

31/10/2024

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT ON FRONT OF TAP BODY

Installation Requirements:

R001 R006 R010

Model:

PARAGON KITCHEN MIXER CP

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Pillar taps with chromium plated brass bodies, incorporating a ¼ turn ceramic disc headwork and single lever operating members. The tap is supplied with a flow straightener and metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature is 85°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001111

Expiry date:

31/01/2025

Size:

½” BSP (M).

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006

Model:

4E1285 ELION DECK BATH FILLER

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Bath pillar taps (chromium plated brass) with quarter turn ceramic disc headwork’s and single lever operating members. The spout outlets incorporate plastic flow straighteners. The product is supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2001113

Expiry date:

31/01/2025

Size:

¾” BSP (M).

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006

Model:

4E1281 ELION BATH PILLAR TAPS

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Both models are supplied with a click type pop-up waste, plastic flow regulators on each inlet and an alternative (loose) flow straightener. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001114

Expiry date:

31/01/2025

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

4E1151 ESPADA MONO BASIN MIXER WITH CLICK WASTE & 4E1152 ESPADA MINI BASIN MIXER WITH CLICK WASTE

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. This product is supplied with plastic flow regulators which are designed to be fitted on the inlet hoses. These products are also supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001115

Expiry date:

31/01/2025

Size:

Stainless steel braided EDPM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

4E1141 WATERFALL MONO BASIN WITH CLICK WASTE & 4E1142 WATERFALL MINI MONO BASIN WITH CLICK WASTE

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Pillar tap (chromium plated brass) incorporating a quarter turn ceramic disc headworks with a single lever type operating member. The spout outlet incorporates a plastic flow straightener and a metal back nut is also supplied. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2001117

Expiry date:

31/01/2025

Size:

½” BSP (M)

Marking:

INSTINCT (BRAND OF PHG) ON OPERATING MEMBER

Installation Requirements:

R001 R005

Model:

4S1251- S12 BASIN PAIR PILLAR TAPS

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001120

Expiry date:

31/01/2025

Size:

Stainless steel braided flexible hose assembly with an EPDM inner hose and ½” BSP captive nut end connectors.

Marking:

INSTINCT ON OPERATING MEMBER

Installation Requirements:

R001 R006 R010

Model:

4E1108 NUANCE MONO SINK MIXER

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Instinct range of magnetic scale inhibitors consisting of central magnets surrounded by knitted copper wire mesh within an acetal or copper body. Connection is via a push fit connection or compression. Maximum working pressure 8.0 bar. Maximum operating temperature 40°C.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

WRAS Approval Number:

1907392

Expiry date:

31/07/2024

Marking:

INSTINCT BY SCALEMASTER & SERIAL NO ON ADHESIVE LABEL ON BODY

Installation Requirements:

R001 R120 R150 R170 R290

Model:

15mm Compression Magnetic Instinct - 403328 22mm Compression Magnetic Instinct- 403335

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2001137

Expiry date:

31/01/2025

Size:

Stainless steel braided flexible hose assembly with an EPDM inner hose and ½” BSP captive nut end connectors.

Marking:

INSTINCT on operating member.

Installation Requirements:

R001 R006 R010

Model:

4E1108 COMBINATION TAP ASSEMBLIES

Factor:

Plumbing & Heating Group

Company Name

Plumbing & Heating Group

Address

C/O Tippers Builders Merchants, Europa Way, Lichfield

Postcode

WS14 9TZ

View All Listings by this Company