Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206013

Size:

Please refer to model.

Marking:

Victaulic logo, model, size and technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Manufacturer:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Range of ductile iron pipe couplings for use with stainless steel and carbon steel pipe. The carbon steel pipe must incorporate a suitable coating or lining for wholesome water use. For maximum working pressure and the type of pipe the fittings are for use with, please refer to model. For above and below ground use. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206015

Size:

Please refer to model.

Marking:

Victaulic size, model and product info on clamp

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Style W07, AGS Rigid Coupling for use with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W77, AGS Flexible Coupling for with Sch10 Carbon Steel pipe: DN350, DN400, DN450, DN500, DN550 - maximum working pressure 25.0 bar. DN600 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 9.5mm carbon steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with Sch10S stainless steel pipe: DN350, DN400, DN450, DN500, DN550, DN600 - maximum working pressure 20.68 bar. Style W89, AGS Rigid Coupling for use with 3mm stainless steel pipe: DN350 - maximum working pressure 16.0 bar. Style W89, AGS Rigid Coupling for use with 4mm stainless steel pipe: DN350 - maximum working pressure 20.68 bar.

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

'EW Gasket Material'. Black coloured EPDM gasket material which is injection moulded and then spliced (made in Poland). In June 2025, black coloured, compression moulded material (made in China) was added to the approval. Shore hardness 65A. Between November 2022 and February 2023, the in-radius size was 3.9mm. Between March 2023 and November 2029, the in-radius size is 4.4mm. For use with water up to 23°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2211521

Expiry date:

30/11/2027

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

'Victaulic Lubricant'. Beige coloured lubricant. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:

5160 Lubricants

Expiry date:

30/11/2027

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

'EW gasket material'. Black coloured, injection moulded, EPDM gasket material. Shore hardness 65A. Tested in-radius size 3.9mm. For use with water up to 65°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240355009

Expiry date:

31/03/2029

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

‘EPDM EV2’. Black coloured, injection moulded EPDM materials. Shore hardness 75A. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2212574

Expiry date:

31/12/2027

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Range of lever operated butterfly valves incorporating fusion bonded Epoxy coated ductile iron bodies, with stainless steel discs and end faces and EPDM seat. For use with Stainless steel pipe manufactured to EN 10217-7 (or Equivalent). For above and Below ground. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250402026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – DN200 for use with Rigid couplers

Marking:

Victaulic, size, date of manufacture (MM/YY), serial No., pressure and other information on data plate on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Series 250-ST, Strengthin100™ Potable Water Butterfly Valve Series 250-SE, OGS Potable Water Butterfly Valve

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Range of Victaulic rigid couplings (905, H10, H11, H20, H50) for use with plain end HDPE pipe (EN 12201-2), and for product 907, for use with EN 12201-2 HDPE and EN 10217-1 steel pipe. For above and below ground use. Maximum working pressure: SDR7.4 25bar, SDR11 16bar or SDR17 10bar. Maximum operating temperature: Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250702013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For H10, H11, H20 and H50, sizes 75, 140, 225mm not available in SDR7.4.

Size:

See Models below.

Marking:

Victaulic and size on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

905 Style 905 Coupling 63mm – 315mm Rigid Coupling, 907 Style 907 Transition Coupling 63mm x DN50 - 280mm x DN250 Rigid Coupling H10, HDPE 90° Elbow 63mm – 225mm Rigid Coupling, H11, HDPE 45° Elbow 63mm – 225mm Rigid Coupling, H20, HDPE Straight Tee 63mm – 225mm Rigid Coupling, H50, HDPE Concentric Reducer 90mm x 63mm – 160mm x 110 mm Rigid Coupling.

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

General Email

ed.mccarson@victaulic.com

View All Listings by this Company