Coin type wastes with chromium plated brass body and rubber seal. Supplied with a plastic backnut.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2004342

Expiry date:

30/04/2025

Size:

1 ¼” BSP (M)

Marking:

DTC32 (brand of Methven) on bottom of plug (models PTW300/017 & D50010005) DTC32 on side of coin (models FTW300/017 & D50010003)

Installation Requirements:

R001

Model:

FTW300/017, D50010003, PTW300/017 & D50010005.

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of shower handsets in chromium plated brass on model MH1 or chromium plated ABS on model MH1A. Model MH2 is supplied with an approved flow regulator. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2005026

Expiry date:

31/05/2025

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

METHVEN on body

Installation Requirements:

R001 R040

Model:

MH1 MH1A MHSCP Model added November 2021: MH2BB MH2BK MH2BN MH2CP MH2GM

Manufacturer:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks, and various operating members. The spout outlet incorporates a plastic flow straightener. Fittings are supplied with either brass or plastic backnuts depending on model. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2005313

Expiry date:

31/05/2025

Size:

¾” BSP (M)

Marking:

DTC on rear of body.

Installation Requirements:

R001 R040

Model:

CNTL02 EXG5052 DLT102 DLV102 DLT SPEC102 (brass backnuts) KEE DLT102 (brass backnuts) VW DLT102 (brass backnuts)

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006809

Expiry date:

30/06/2025

Size:

Stainless steel braided EPDM lined hose assembly with ½” captive nut end connections.

Marking:

Deva on front of body. DTC28 on rear of body.

Installation Requirements:

R001 R006 r010

Model:

SENSOR1/D, SENSOR2/D, SENSOR3/D

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assembles with brass bodies (various finishes), incorporating a non-rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2005348

Expiry date:

31/05/2025

Size:

15mm copper tails

Marking:

DTC34 (Methven logo) on rear of body.

Installation Requirements:

R001 R006 R010

Model:

Models with dome type operating members: DCM104 DCP124/004 DCP124/005 Models with cross top operating members: MILAN104 VW MILAN104 WM MILAN104

Factor:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington

Postcode

WA3 3JE

Phone

0800 195 1602

View All Listings by this Company