Methven UK Limited Approvals


#1905010

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1905010
Expiry date:
31/05/2024
Size:
¾” BSP (M)
Marking:
DEVA on left leg of body. DTC 53 on rear.
Installation Requirements:
R001 R006 r010
Model:
ETH108 & ZON108. Model added May 2023: 32935 Model added September 2023: ETH108BK Model added September 2023: SVL108
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1905072

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (includes chromium plated brass and black plated brass finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener on models (VSN122, VSN122M, and SF2501CP) or aerator on models (BRWMBBK and BRWMBCP). The spout outlet also incorporates a stainless-steel mesh located in the outlet of models (VSN122, VSN122M, and SF2501CP). VSN122, VSN112M and SF2501CP are supplied with a ½” BSP (M) x 15mm compression adaptor. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1905072
Expiry date:
31/05/2024
Size:
See model
Marking:
DEVA on operating member and DTC34 on body. BRWMBBK model also has Methven on the operating member
Installation Requirements:
R001 R010 R040
Model:
BRWMBBK & BRWMBCP: ½” BSP (F). VSN122, SF2501CP & VSN122M: ½” BSP (M).
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1905051

Range of shower handsets (stainless steel plated plastic bodies) and shower kits. Model TUHSSWHUK/265500 Turoa is a shower handset. Model TUSRSSWHUK Turoa comprises a shower handset, hose & riser rail. Model TUWOBSSWHUK Turoa comprises a shower handset, hose & wall fitting/handset holder. Model TUKITSS Turoa comprises of a shower handset, hose & riser rail. The hoses incorporate a stainless steel strainer. The shower handset incorporates a plastic flow regulator on the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
WRAS Approval Number:
1905051
Expiry date:
31/05/2024
Note:
Open outlet use only
Size:
TUSRSSWHUK, TUWOBSSWHUK & TUKITSS: ½” BSP conical nut (to shower hose). TUHSSWHUK/265500: ½” BSP (M)
Marking:
Methven on base of shower handset.
Installation Requirements:
R001
Model:
TUHSSWHUK/265500 Turoa, TUSRSSWHUK Turoa, TUWOBSSWHUK Turoa & TUKITSS Turoa. Models added January 2020: Shower handset TUHSGD - Gold TUHSGR - Graphite TUHSGM - Gun Metal Range of shower kits TUSRGD - Gold TUSRGM - Gun Metal TUSRGR - Graphite TUWOBGD - Gold TUWOBGM - Gun Metal TUWOBGR - Graphite
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1905025

Range of two-hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disk headwork with single lever operating members and lockable diverter with locking mechanism to shower outlet. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts, a shower handset and hose assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0525 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, lockable diverter to shower outlet.
WRAS Approval Number:
1905025
Expiry date:
31/05/2024
Size:
¾” BSP (M)
Marking:
Deva on body. DTC 53 on rear of body.
Installation Requirements:
R001 R006 R020
Model:
ETH106 & ZON106 Model added May 2023: 79052 Model added September 2023: ETH106BK SVL106
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1905014

Range of single hole, single outlet (fixed) combination taps (chromium plated brass or gold effect finish brass), incorporating rising spindle headworks and dome or cross top operating members. The spout outlet incorporates a plastic flow straightener. All models apart from the DCM113b model are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1905014
Expiry date:
31/05/2024
Note:
No testing performed on pop-up waste
Size:
15mm copper tails
Marking:
DTC 34 (Brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Model:
DCM113, DCM113-501, DCM113b, WM DCM113B, SOLE113 & D50010012. MILAN113, WM MILAN113B, D50010032, TUD113 & TUD113/501 Models added February 2020: EBT20113 EBT13113 Model added January 2022: CAR MILAN113B
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906709

Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Valves
Section Subtitle:
Blending, thermostatic.
WRAS Approval Number:
1906709
Expiry date:
30/06/2024
Size:
15mm or 22mm compression.
Marking:
DEVA, MAX PRESSURE, TEMPERATURE & MODEL ON CAP. CR & SIZE ON BODY
Installation Requirements:
R001 R040 R120
Model:
TBV008 & TBV010
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906054

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. Models SAVV2108, SHD108 and SEV108 incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed.
WRAS Approval Number:
1906054
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
Deva on body.
Installation Requirements:
R001 R006 R010
Model:
SWO2108, SAVV2108, SHD108 & SEV108, Model added September 2023: MCA108
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906057

Range of pillar taps (chromium plated brass) incorporating rising spindle headworks with cross top operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar, metal.
WRAS Approval Number:
1906057
Expiry date:
30/06/2024
Size:
¾” BSP (M)
Marking:
DTC34 on rear of body and side bonnet.
Installation Requirements:
R001 R005
Model:
CR20 & CR20/501
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906073

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks that control both flow and temperature with single lever operating members. The spout outlets incorporate plastic aerators and the products are supplied with a click type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
1906073
Expiry date:
30/06/2024
Note:
No testing performed on click type waste
Size:
Stainless Steel braided, EPDM lined hose assembly incorporating ½” BSP captive nut end compression end connections.
Marking:
DEVA on operating member.
Installation Requirements:
R001 R006 R010
Model:
ETH113 & ZON113 Model added September 2023: SVL113
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#1906087

Range of shower handsets and shower kits (chromium plated brass bodies). The shower handsets incorporate a plastic flow regulator. The shower hose incorporates stainless steel strainer. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
WRAS Approval Number:
1906087
Expiry date:
30/06/2024
Size:
½” BSP male & ½” BSP female
Marking:
Methven logo etched on handle or showerface.
Installation Requirements:
R001 R040
Model:
KRHSCPUK Kiri MK2 Satinjet. KRWSCPUK Kiri MK2 Satinjet. EKIT09/KR Kiri MK2. KHHSCPUK Kaha Chrome Satinjet. KHWSCPUK Kaha Chrome Satinjet. EKIT08/KH Kaha Chrome. OSRO230CPUK Satinjet.
Factor:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 26

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.