Methven UK Limited Approvals


#2305350

Range of concealed, wall mounted, thermostatic blending valves, (brass bodies, chrome trim sets). The products can consist of quarter turn ceramic disc or detent headworks, two-way diverter cartridges and a thermostatic cartridges (see models). All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2305350
Size:
¾” BSP (F)
Marking:
DEVA on faceplate
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2028
Model:
Thermostatic cartridge & 1,2 or 3 detent headworks AST1D & AST2D

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2305081

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:
1050 Filters and Housings
WRAS Approval Number:
2305081
Size:
Refer to models
Marking:
Deva, WRAS, pressure & temp on adhesive label on body.
Installation Requirements:
R001 R008 R150 R170 R290
Expiry date:
31/05/2028
Model:
Carbon Block/Scale Inhibitor models: FILTER 001 10” 1 micron: ¼” push fit

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2301088

Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. Products are supplied with a shower hose and handset and plastic backnuts. Maximum working pressure 6.0 Bar.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2301088
Size:
¾” BSP (M).
Marking:
DTC 59 on back of body
Installation Requirements:
R001 R020
Expiry date:
31/01/2028
Model:
VR106 VL106 ALT106 POR106

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2301089

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc (VL101 + VL101-4) or non-rising spindle headworks (all other models) with various operating members and metal backnuts. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
2301089
Size:
½” BSP (M).
Marking:
DTC 59 on body.
Installation Requirements:
R001 R005
Expiry date:
31/01/2028
Model:
VR101– Dome Type, VL101 – Single Lever, Models Added September 2023 ALT101 & POR101 Models Added October 2023 VER101 Models added December 2023 TU101 Model added July 2024 157-00005 Models added November 2024 TUD01 MILAN 101 181X TUD01/501 Models added February 2025 VR101-4 & VL101-4

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2301090

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc (VL103 + VL103-5) or non-rising spindle headworks (all other models) with various operating members and metal backnuts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 6.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
2301090
Size:
½” BSP (M).
Marking:
DTC 59 on body.
Installation Requirements:
R001 R006
Expiry date:
31/01/2028
Model:
VR103 – Dome Type, VL103 – Single Lever, Models added September 2023: ALT103 - Dome Type POR103 - Single Lever. Models added January 2025: MILAN 103 183X SF2403CP Models added February 2025 VL103-5 VR103-5

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 34 of 50

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.