Range of single hole, single outlet (swivel) combination tap assemblies with pull-down hose. Incorporating a brass body (various finishes) and a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2209062

Expiry date:

30/09/2027

Size:

Stainless steel braided flexible EPDM lined flexible hose assemblies with ½” BSP captive nuts.

Marking:

1810 on operating member.

Installation Requirements:

R001 R010 R090

Model:

SPI-SPR/01/CH - SPIRALE SPRING CHROME SPI-SPR/02/BS - SPIRALE SPRING BRUSHED STEEL SPI-SPR/04/COP - SPIRALE SPRING COPPER SPI-SPR/05/GM - SPIRALE SPRING GUNMETAL SPI-SPR/06/GB - SPIRALE SPRING GOLD BRASS SPI-SPR/07/MB - SPIRALE SPRING MATTE BLACK SPI-SPR/08/BGB - SPIRALE SPRING BRUSHED GOLD BRASS

Factor:

The 1810 Company limited

Company Name

The 1810 Company limited

Address

Units 14-16, Bromfield Industrial Estate, Queens Lane Mold

Postcode

CH7 1JR

Phone

0044 7772144600

View All Listings by this Company

Range of single-hole, single outlet (swivel) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2402700

Expiry date:

28/02/2029

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.

Marking:

The 1810 Company Ltd logo on handle

Installation Requirements:

R001 R006 R009 R010

Model:

DAV/01/CH (Chrome) DAV/02/BS (Brushed Steel)

Factor:

The 1810 Company limited

Company Name

The 1810 Company limited

Address

Units 14-16, Bromfield Industrial Estate, Queens Lane Mold

Postcode

CH7 1JR

Phone

0044 7772144600

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies with (brass bodies -various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator.and a pull out spray feature. The connection between the outlet and the hose incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate that it provides backflow protection Maximum working pressure 7 bar. Maximum operating temperature 65ºC.

Section:

0445 Combination Tap Assemblies

Section Subtitle:

Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240104022

Expiry date:

31/01/2029

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

1810 on operating member

Installation Requirements:

R001 R009 R090

Model:

RIT/02/BS BRUSHED STEEL RIT/07/MB MATT BLACK RIT/10/BG BRUSHED GOLD RIT/09/RC ROSE COPPER RIT/05/GM GUN METAL EST/02/BS BRUSHED STEEL EST/07/MB MATT BLACK EST/10/BG BRUSHED GOLD EST/09/RC ROSE COPPER EST/05/GM GUN METAL

Factor:

The 1810 Company limited

Company Name

The 1810 Company limited

Address

Units 14-16, Bromfield Industrial Estate, Queens Lane Mold

Postcode

CH7 1JR

Phone

0044 7772144600

View All Listings by this Company

Range of two-hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a dome type operating member. The spout outlet incorporates a plastic aerator. The headwork is connected to the spout via a stainless steel braided PEX lined flexible hose assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60.0°C

Section:

0550 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240402053

Expiry date:

30/04/2029

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.

Marking:

1810 on operating member.

Installation Requirements:

R001 R006 R007 R009 R010

Model:

FIN/01/CH (Chrome), FIN/02/BS (Brushed Steel), FIN/04/COP (Copper), FIN/05/GM (Gunmetal), FIN/06/GB (Gold), FIN/07/MB (Matt Black), FIN/08/BGB (Brushed Gold).

Factor:

The 1810 Company limited

Company Name

The 1810 Company limited

Address

Units 14-16, Bromfield Industrial Estate, Queens Lane Mold

Postcode

CH7 1JR

Phone

0044 7772144600

View All Listings by this Company