Dart Valley Systems Ltd. Approvals


#1906347

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies - various finishes). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Depending on model the products are supplied with either a stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection or 10mm copper tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906347
Expiry date:
30/06/2024
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. The products are not supplied with anything to connect between the solenoid valve (15mm compression) and the copper tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). The following is model dependent - see model section: Stainless steel braided PEX lined flexible hose assembly with 15mm spigot end connection. 10mm copper tail.
Marking:
DVS on spout body
Installation Requirements:
R001 R006 R007 R570
Model:
AT03-001 Aquarius DM A32 tap spout only in s/steel with PEX tails, AT03-002 Aquarius DM A32 tap spout only in s/steel copper tails, AT03-003 Aquarius DM A32 tap spout only in polish s/steel with PEX tails, AT03-004 Aquarius DM A32 tap spout only in polish s/steel with copper tails. AT03-011 Aquarius DM A45 tap spout only in s/steel with PEX tails, AT03-012 Aquarius DM A45 tap spout only in s/steel copper tails, AT03-013 Aquarius DM A45 tap spout only in polish s/steel with PEX tails, AT03-014 Aquarius DM A45 tap spout only in polish s/steel with copper tails. AT03-021 Aquarius DM A45 Doc M tap spout only in s/steel with pex tails, AT03-022 Aquarius DM A45 Doc M tap spout only in s/steel copper tails, AT03-023 Aquarius DM A45 Doc M tap spout only in polish s/steel with pex tails, AT03-024 Aquarius DM A45 Doc M tap spout only in polish s/steel with copper tails. AT03-031 Aquarius DM Short neck tap spout only in s/steel with PEX tails, AT03-032 Aquarius DM Short neck tap spout only in s/steel copper tails, AT03-033 Aquarius DM Short neck tap spout only in polish s/steel with PEX tails, AT03-034 Aquarius DM short neck tap spout only in polish s/steel with copper tails. AT03-041 Aquarius DM high neck tap spout in s/steel with PEX tails, AT03-043 Aquarius DM high neck tap spout in polish s/steel with PEX tails. AT03-051 Aquarius DM short pillar tap in chrome spout only with PEX tails, AT03-061 Aquarius DM tall pillar tap in chrome spout only with PEX tails.
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW

View All Listings by this Company

Print This Approval


#1906346

‘Classic’ range of single hole, single outlet (fixed) electronically operated, tap assemblies (chromium plated DZR brass). Flow is controlled via solenoid valve, actuated by an infra-red sensor. The spout outlet incorporates a plastic aerator. AT01-001 & AT01-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT01-002 & AT01-012 models have a 10mm copper tail. AT01-003 & AT01-013 models have a 10mm stainless steel tail. Maximum working pressure 8.0 Bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1906346
Expiry date:
30/06/2024
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation. The products are not supplied with anything to connect between the solenoid valves (15mm compression) and the copper tail (10mm), or the stainless steel tail (10mm), or the flexible inlet hose (15mm spigot) this must be sourced by the installer. R007 applies only to models that are supplied with PEX lined connecting hose assemblies.
Size:
15mm compression (solenoid - all models). AT01-001 & AT01-11 models have a stainless steel braided PEX lined flexible inlet hose assembly with 15mm spigot end connection. AT01-002 & AT01-012 models have a 10mm copper tail. AT01-003 & AT01-013 models have a 10mm stainless steel tail.
Marking:
DVS on spout body
Installation Requirements:
R001 R006 R007 R570
Model:
Classic Range: AT01-001, AT01-002 & AT01-003. Classic Range (Swan Spout): AT01-011, AT01-012 & AT01-013.
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW

View All Listings by this Company

Print This Approval


#2102801

Range of wall mounted, electronically controlled spout outlets with stainless steel bodies. Flow is controlled via a solenoid valve activated via an infra-red sensor. Models AT07-102 and AT07-103 are supplied with a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
2102801
Expiry date:
28/02/2026
Size:
15mm compression
Marking:
AT07-101 and AT07104: DVS on underside of spout. AT07-102 and AT103: DVS on end of spout.
Installation Requirements:
R001 R040
Model:
AT07-101 AT07-102 AT07-103 AT07-104
Manufacturer:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW

View All Listings by this Company

Print This Approval


#2011047

Range of wall mounted, single hole, single outlet (fixed) combination tap assemblies with chromium plated, DZR brass bodies. The products incorporate a single sequential headwork with a single lever operating member or a push button. The spout outlets incorporate a plastic flow straightener. The inlets incorporate an approved check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Products are supplied with metal back nuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2011047
Expiry date:
30/11/2025
Size:
10mm copper tails
Marking:
DVS on indice.
Installation Requirements:
R001 R010 R040
Model:
MT04-001 & AT04-002
Manufacturer:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW

View All Listings by this Company

Print This Approval


#2105314

DC type pipe interrupter with a permanent atmospheric vent. Chomium plated DZR brass body and shroud. Maximum working pressure 8.0 bar. Maximum operating temperature 40°C.

Section:
0014 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2. Type DC - Pipe interrupter with permanent atmosphere vent. The device must be fitted with the lowest point of the air aperture not less than 150mm above the free discharge point, or spillover level of an appliance, and have no valve, flow restrictor or tap on its outlet.
WRAS Approval Number:
2105314
Expiry date:
31/05/2026
Size:
15mm compression x 22mm compression
Marking:
Company logo, (DVS) CR & flow arrow on body.
Installation Requirements:
R001 R165
Model:
UC00-001
Factor:
Dart Valley Systems Ltd.
Company Name
Dart Valley Systems Ltd.
Address
Kemmings Close, Long Road, Paignton, Devon
Postcode
TQ4 7TW

View All Listings by this Company
Manufacturer:
Ideal China Building Material Int’l Corp
Company Name
Ideal China Building Material Int’l Corp
Address
2F-2 No 137 Sec 4 Hsin Yi Rd Taipei

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 2

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.