Range of gas fired water heaters incorporating stainless steel strainers on the inlets. Maximum working pressure 10.0 Bar Maximum working temperature 85˚C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

2012086

Size:

1/2" BSP (M) inlet and outlets

Marking:

BAXI MULTIPOINT on front of heater, BAXI MULTIPOINT, model and technical info on adhesive label on side of heater.

Installation Requirements:

R001 R140

Expiry date:

31/12/2025

Model:

BAXI MULTIPOINT 7782048 & BAXI MULTIPOINT 7782050 GAS FIRED WATER HEATERS

Approval Holder:

Baxi Heating UK Ltd.

Company Name

Baxi Heating UK Ltd.

Address

Club Street Bamber Bridge Preston Lancaster

Postcode

PR5 6FN

View All Listings by this Company

Range of waste water heat recovery systems incorporating a twin wall copper coil (7773414 models) or stainless steel (7771332 models). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1350 Heat Exchangers

Size:

½” BSP (M) (7773414) or ¾” BSP (F) (7771332)

Marking:

BAXI, Model, and technical info on adhesive label located on plastic casing.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

VERTICAL SHRU 7771332 & HORIZONTAL SHRU 7773414 HEAT EXCHANGERS

Approval Holder:

Baxi Heating UK Ltd.

Company Name

Baxi Heating UK Ltd.

Address

Club Street Bamber Bridge Preston Lancaster

Postcode

PR5 6FN

View All Listings by this Company

Ranges of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system incorporating an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both domestic hot water and primary are controlled via spherical valves. Products are supplied with a rigid filling loop or keyless filling link. Maximum working pressure of the primary circuit is 2.5 bar & maximum supply pressure of the secondary circuit is 8.0 bar. Cold water supply only. Maximum operating temperature 95°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2107804

Size:

Primary: 28mm compression. Secondary: 15mm compression.

Marking:

Baxi on front of boiler.

Installation Requirements:

R001 R140 R360

Expiry date:

31/07/2026

Model:

Baxi 224 Combi (product code 7656160). Baxi 228 Combi (7656161). Baxi 424 Combi (7656162). Baxi 428 Combi (7656163). Baxi 428 Combi LPG (7676760).

Approval Holder:

Baxi Heating UK Ltd.

Company Name

Baxi Heating UK Ltd.

Address

Club Street Bamber Bridge Preston Lancaster

Postcode

PR5 6FN

View All Listings by this Company

Manufacturer:

Baxi Spa

Company Name

Baxi Spa

Address

Via Trozzetti 20 36061 Bassano del Grappa (VI)

Phone

Tel: +39 0424 517 111 Fax: +39 0424 38089

View All Listings by this Company