Range of single hole, single outlet (swivel), combination tap assemblies (chromium plated brass). Incorporate a quarter turn ceramic disc headworks with single lever operating members (Models Cresta, Sion & Henley) or ceramic cartridge headworks with single lever operating members (model Reno). The inlets incoprorate approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110300

Expiry date:

31/10/2026

Size:

½” BSP (M)

Marking:

Sion: Franke logo on body Cresta: Franke logo on operating member Henley: Carron Phoneix on body Reno: Carron Phoneix on operating member

Installation Requirements:

R001 R006 R010

Model:

Cresta Henley Sion Reno

Factor:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The cold water inlet tail incorporates approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2006369

Expiry date:

30/06/2025

Size:

Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections. Cold inlet – ½” BSP (M)

Marking:

Franke on operating member.

Installation Requirements:

R001 R006 r010

Model:

FUJI COMBINATION TAP ASSEMBLY

Factor:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic aerator. The cold inlet hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110383

Expiry date:

31/10/2026

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP captive nut end connections (hot), ½” BSP (M) (cold).

Marking:

Franke on tap body

Installation Requirements:

R001 R006 R010

Model:

BERN COMBINATION TAP ASSEMBLIES

Factor:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic disc headworks with a single lever operating members. The spout outlet incorporates a plastic flow straightener or aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2110384

Expiry date:

31/10/2026

Size:

Stainless steel braided EPDM lined flexible hose with ½” BSP captive nut end connections.

Marking:

Carron Pheonix (brand of Franke) on body

Installation Requirements:

R001 R006 R010

Model:

AZTEC KG1 & KM1 COMBINATION TAP ASSEMBLIES

Factor:

Franke UK Ltd.

Company Name

Franke UK Ltd.

Address

West Park, MIOC, Styal Road, Manchester

Postcode

M22 5WB

Phone

0161 4360280

View All Listings by this Company