Range of flow sensors with plastic bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN6 (½” BSP M), DN8 (½” BSP M), DN10 (¾” BSP M), DN15 (¾” BSP M), DN20, (1” BSP M) & DN25 (1¼” BSP M).

Marking:

Huba control, model code, connection size, date of manufacture (DD/MM/YY) and other technical data on face of body. Flow arrow and DN on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

Vortex Flow Sensor Type 240.

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of in-line flow sensors incorporating either brass (type 230, 235 & 236) or plastic (type 200 & 210) bodies & EPDM ‘O’-rings. Maximum working pressure 12.0 Bar Maximum operating temperature 100.0°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Type 200 range is for use with copper pipe (manufactured to EN 1057)

Size:

Type 200 Range – Clip connection: DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 210 Range – BSP (M) DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 230 Range – BSP (M) DN10 = ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 235 and Type 236 Ranges – BSP (M) DN8 = ½” or ¾”, DN10 = ½” or ¾” or 1”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼”, DN25 = 1.¼” or 1.½” and DN32 = 1.½”

Marking:

Type 200 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 210 - Huba Control, model number, DN, flow arrow and other technical information on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 230 - Huba Control, DN and flow arrow on body. Huba Control and other technical information on adhesive label on sensor cap. Type 235 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 236 - Huba control, Model number and other technical information on adhesive label on body. DN and Flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Type 200 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 210 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 230 – DN10, DN15, DN20 & DN25. Type 235 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 236 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 201 – Flow Sensor Head, Type 211 – Flow Sensor Head.

Approval Holder:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Huba Control logo and technical info on body

Installation Requirements:

R001

Expiry date:

31/01/2031

Model:

Type 520: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 7/16"-20 UNF, sealed at front ISO 11926-1 Male G1/4", sealed at front, Female 1/2"-14 NPT, thread sealing, Male 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/8", sealed at front, Male G1/4", sealed at back without sealing groove, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/4", sealed at front, Female G1/4", sealed at front + Manometer, Male G1/4", sealed at back DIN 3852-2, Male R1/4", thread sealing EN 10226, Male G1/2", sealed at front, Male M20x1.5, sealed at front + Manometer, Male 7/16"-20 UNF, sealing cone with schrader, Female Type 522: Dimension, Sealing type, Male/Female Thread 7/16"-20 UNF, sealing cone 45°, Female 1/2"-14 NPT, thread sealing, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male G1/4", sealed at back + Manometer, Male G1/2", sealed at front, Male G1/2", sealed at front + Manometer, Male M20x1.5, sealed at front + Manometer, Male Type 540: Dimension, Sealing type, Male/Female Thread G1/4", sealed at front, Female 7/16"-20 UNF, sealing cone 45°, Male G1/4", sealed at back ISO 1179-2, Male R1/4", thread sealing EN 10226, Male Additional Information The pressure orifice and the connectors are all made from stainless steel X2CrNiMo17-12-2/1.4404 / AISI316L. The Schrader is made from Stainless X8CrNi18-9/1.4305/303 All variants can use the following pressure cell options, based on application requirements: -1…9 Bar / 0…2.5 - 100 bar (Stainless Steel Cell X6Cr17-1.4016) The only difference between the models 520, 522 & 540 is the input and output signal, and the approvals (not relevant to WRAS) All the different type variants can be given a unique customer article number, to trace the full specification: Example: 520.99XXX 520 = Model Type 99 = Client / project specific number XXX = Unique file for client containing all the above options specified within model.

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company