Range of solenoid valves with plastic bodies and EPDM diaphragms. The inlet incorporates a plastic strainer and an integrated flow meter sensor. Both the inlet and the outlet incorporate a white plastic flow restrictor. The products are also supplied with an optional EPDM outlet gasket, for installation over the outlet spigot. Maximum working pressure 10.0 bar (to diaphragm). Maximum operating temperature 85°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

2104329

Note:

Open outlet use only.

Size:

See model.

Marking:

TP Reflex logo, model no, pressure range and flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2026

Model:

¾” BSP (M) inlet/10.27mm spigot outlet: ES90/88. ES180/88. ESL 90/88-M. ¾” BSP (M) inlet/10.27mm double outlet: ED90/88. ED180/88. EDL90/88-L. ED180/88-L. ED180/88-FM. EDL90/88–M. ¾” BSP (M) inlet/10.27mm triple spigot outlet: ET90/88. ET180/88. ETL90/88-M. 23.64mm manifold inlet/9.10mm spigot outlet: 1ES-L. ¾” BSP (M) inlet/10.27mm quadruple spigot outlet EQL90/88-L: ¾” NPT (M) double inlet/12.81mm spigot outlet: EM180/88.

Approval Holder:

TP Reflex Group S.p.A

Company Name

TP Reflex Group S.p.A

Address

Via Brescia 8, Tradate (VA)

Phone

0331 816611

General Email

info@tp-spa.com

View All Listings by this Company

Manufacturer:

TP Reflex Polska Sp. zo.o & TP Reflex Group S.p.A (Italy)

Company Name

TP Reflex Polska Sp. zo.o & TP Reflex Group S.p.A (Italy)

Address

General Email

View All Listings by this Company

Flexible safety hose assembly with PVC, composite inner hose and corrugated outer cover incorporating EPDM gaskets. The inlet of the hose incorporates a plastic strainer. The hose is fitted with an integral device which is intended to stop the flow of water (please note that this function has not been verified by test). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

251202040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This product has not been tested or approved for anti-flooding claims made by the approval holder.

Size:

¾” captive nut

Marking:

TP REFLEX, flow arrow, date of manufacture (DD.WW.YYYY), WRAS and technical information on cover of valve body. TP REFLEX and date of manufacture (date wheel) on elbow connection

Installation Requirements:

R001 R008

Expiry date:

31/12/2030

Model:

S18 Safety inlet hose

Approval Holder:

TP Reflex Group S.p.A

Company Name

TP Reflex Group S.p.A

Address

Via Brescia 8, Tradate (VA)

Phone

0331 816611

General Email

info@tp-spa.com

View All Listings by this Company