Samuel Heath & Sons Plc Approvals


#2303701

Range of wall mounted, three-hole single outlet combination tap assemblies (various finishes), incorporating quarter turn ceramic disc headworks with dome type operating members. The spout outlets for models (V117 XX and V120 XX) incorporate plastic aerators and model (V147 XX) incorporates a plastic flow straightener. The spout inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2303701
Expiry date:
31/03/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on body.
Installation Requirements:
R001 R010 R040
Model:
V117-CP V120-CP V147-CP Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303702

Wall mounted spout outlet brass body (various finishes) incorporating plastic flow straightener. The inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlets.
WRAS Approval Number:
2303702
Expiry date:
31/03/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on Spout
Installation Requirements:
R001
Model:
V157-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2301035

Range of four-hole, single outlet (swivel) combination tap assemblies (various finishes, see models), incorporating quarter turn ceramic disc headworks with a variety of operating members (see models) and a self-cancelling diverter to shower outlet. The spout outlets incorporate plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0680 Combination Tap Assemblies
Section Subtitle:
Multi - hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2301035
Expiry date:
31/01/2028
Size:
¾” BSP (M)
Marking:
Samuel Heath on base of spout
Installation Requirements:
R001 R006 R030
Model:
V2K48YY-XX Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: X = Cross Tops, or GBC = Gloss Black Chrome Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, BGM = Brushed Gold Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303026

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies, (brass bodies, various finishes – see model) incorporating quarter turn ceramic disc headworks. The spout inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2303026
Expiry date:
31/03/2028
Note:
The products are to be used with V718-IS-XX rough kit, however, the rough kit is not part of this approval.
Size:
3/4” BSP (M) (Headwork & Spout) specifically for use with rough kit V718-IS-XX which has 3/4" BSP (F)
Marking:
SHS on Body
Installation Requirements:
R001 R010 R040
Model:
T20K17-1YY-XX T20K17-2YY-XX Models added March 2024: T11K17-1YY-XX T11K17-2YY-XX Where the product code suffix YY denotes the lever options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: COL = Lever One, or CBA = T-Bar. Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303031

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see models), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Model V110V2-XX also comes supplied with a lever operated pop up waste. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2303031
Expiry date:
31/03/2028
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided, PEX lined flexible hoses with 1/2" BSP captive nut end connections.
Marking:
Samuel Heath on base of tap
Installation Requirements:
R001 R006 R009 R010
Model:
V109V2-XX V110V2-XX V129V2-XX V130V2-XX V131V2-XX XX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers, As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303050

Range of wall mounted installation kits with brass bodies Maximum working pressure 5.0 bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2303050
Expiry date:
31/03/2028
Size:
See model.
Marking:
SHS on body
Installation Requirements:
R001 R040
Model:
V118-IS-XX – ¾” BSP x 15mm compression. V218-IS-XX – ¾” BSP x 15mm compression. V158-IS-XX – ½” BSP (F) XX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers, as examples: CP = chrome finish, URM urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304048

Three-hole, single outlet (fixed) combination tap assembly (brass body – various finishes). Incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever type pop-up waste and stainless steel braided EPDM lined connection hoses. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2304048
Expiry date:
30/04/2028
Note:
No testing performed on pop up waste.
Size:
½” BSP (M)
Marking:
Samuel Heath on front of body
Installation Requirements:
R001 R005 R010
Model:
V2K14YY-XX – 3 Hole basin filler with pop-up waste Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: X = Cross Tops, or GBC = Gloss Black Chrome Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or BCG = Brushed Gold Gloss Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304049

Three-hole, single outlet (fixed) combination tap assembly (brass body – various finishes). Incorporating quarter turn ceramic disc headworks with various operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever type pop-up waste and stainless steel braided EPDM lined connection hoses Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed.
WRAS Approval Number:
2304049
Expiry date:
30/04/2028
Note:
No testing performed on pop up waste.
Size:
½” BSP (M)
Marking:
Samuel Heath on front of body
Installation Requirements:
R001 R006 R010
Model:
V2K15YY-XX - 3 Hole basin filler with pop-up waste Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: X = Cross Tops, or GBC = Gloss Black Chrome Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or BCG = Brushed Gold Gloss Lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2304058

Range of wall mounted, three-hole, single outlet, combination tap assemblies, (brass bodies - various finishes) incorporating ceramic cartridge headworks with various operating members. The spout incorporates a self-cancelling diverter to shower outlet and plastic aerators. The spout inlets incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow prevention. The products are supplied with a shower hose and handset. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0655 Combination Tap Assemblies
Section Subtitle:
Three hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
WRAS Approval Number:
2304058
Expiry date:
30/04/2028
Size:
½” BSP (F).
Marking:
Samuel Heath on wall plate or escutcheon.
Installation Requirements:
R001 R030
Model:
V7K43-1YY-XX - 3 Hole Wall Mounted Bath Filler V7K43-2YY-XX - 3 Hole Wall Mounted Bath Filler V7K43-1YYNP-XX - 3 Hole Wall Mounted Bath Filler – No Plate V7K43-2YYNP-XX - 3 Hole Wall Mounted Bath Filler – No Plate Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval


#2303048

Range of two-hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see models), incorporating quarter turn ceramic disc headworks and a manual diverter to shower outlet. The product incorporates brass backnuts. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
WRAS Approval Number:
2303048
Expiry date:
31/03/2028
Size:
3/4" BSP (M)
Marking:
SAMUEL HEATH on rear of body
Installation Requirements:
R001 R005 R020
Model:
V2K30YY-XX V2K31YY-XX
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 6 of 10

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.