Samuel Heath & Sons Plc Approvals


#2207036

Range of three-hole, single outlet (fixed) combination tap assemblies (chrome plated brass) and trim sets incorporating quarter turn ceramic disc headworks with single lever or cross top operating members. The spout outlets incorporate a plastic aerator or flow straightener (depending on model). Models beginning with V7171-1, V7171-2 & V717-3 incorporate approved check valve cartridges, however, the complete products has not been fully tested to demonstrate they provide backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:
0650 Combination Tap Assemblies
Description:
Three hole tap with a single outlet and a fixed spout.
Size:
¾” BSP (F) (Rough kit)
Marking:
Samuel Heath on spout escutcheon
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
Landmark V7K17-1YY-XX, V7K17-2YY-XX, V7K17-3YY-XX, V7K47-1YY-XX, V7K47-2YY-XX Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2207037

Range of brass spout outlets with various finishes (see model). The products incorporate plastic flow straighteners. Maximum operating temperature 60.0°C

Section:
0682 Combination Tap Assemblies
Description:
Spout outlets.
Open outlet use only. Product to be installed with rough kit V758-IS-XX but is not supplied with product.
Size:
½” BSP (M)
Marking:
Samuel Heath on spout escutcheon
Installation Requirements:
R001 R040
Expiry date:
31/07/2027
Model:
V746-1F-XX V746-1K-XX V746-2F-XX V746-2K-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2207039

Range of concealed flow control valves with a brass bodies incorporating quarter turn ceramic disc headworks. The valve can be supplied with a range of trim kits (see models) (model V607-ISL) or on its own (model V607-IS). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
2170 Valves
Description:
Flow control, manually operated.
Size:
¾” BSP (F) inlet and outlet
Marking:
SHS on underside of operating member
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
Concealed Flow Control Rough in Set: V607- IS -XX (RH Closing Headwork) V607-ISL-XX (LH Closing Headwork) for use with the following trim sets: LANDMARK TRIMS: V707-T -LK -XX Industrial Design Lever. V707-T -XK -XX Industrial Design X-Top. V707-T -LF -XX Pure Design Lever. V707-T -XF -XX Pure Design X-Top. STYLE MODERNE TRIMS: V607-T -TM -XX Metal Lever. V607-T -TMB -XX Black Chrome Lever. V607-T -TX -XX Cross Top. V607-T -TXB -XX Black Chrome Cross Top. V607-T -L -XX Lux Lever. V607-T -TD -XX Lux Cross Top. ROYAL CROWN DERBY TRIMS: V807-T M -XX Metal Lever. V807-T X -XX Cross Top. XENON TRIMS: V107-T 2 -XX Metal Lever. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2209011

Range of shower handsets with brass bodies, available with various finishes. The inlet incorporates a plastic regulator and incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80°C

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Open outlet use only
Size:
½” BSP (M)
Marking:
SHS on body
Installation Requirements:
R001 R040
Expiry date:
30/09/2027
Model:
F754W-K-XX V754W-F-XX “XX” - denotes choice of finish available: CP Chrome Plate, PN Polished Nickel, SSF Stainless Steel Finish, NL Non-Lacquered, BG Brushed Gold, BGG Brushed Gold Gloss lacquered, BGM Brushed Gold Matt Lacquered, CTB City Bronze, CNB Country Bronze, AG Antique Gold, MOP Matt Finish, MBC Matt Black Chrome, SSB Stainless steel finish, URB Urban Brass & URM Urban Brass Matt
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2209034

Wall mounted shower head arm incorporating a chrome plated brass body and EPDM O-rings. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Open outlet use only.
Size:
15mm Compression
Marking:
SHS on body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2027
Model:
V762W-XX
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2209036

Range of three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.

Section:
0655 Combination Tap Assemblies
Description:
Three hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
Size:
Stainless steel braided, EPDM lined hose assemblies with 1/2" BSP captive nut end connections.
Marking:
SAMUEL HEATH on escutcheon on base of tap
Installation Requirements:
R001 R006 R030
Expiry date:
30/09/2027
Model:
V737V2-XX V739V2-1F-XX V739V2-2F-XX V739V2-1K-XX V739V2-2K-XX
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2211705

Three hole single outlet trim sets consisting of two ceramic disk headworks and a spout with a flow straightener. Various operating members (see model section). V246 prefix model is a wall mounted spout with a flow straightener only. The products are brass bodied and available in various finishes (see model). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Description:
Three hole tap with a single outlet and a fixed spout.
Size:
Connects to V118-IS-XX installation system for wall mounted fillers, which has 22mm compression fitting inlets.
Marking:
Samuel Heath on base of Spout.
Installation Requirements:
R001 R040
Expiry date:
30/11/2027
Model:
Basic Model without Lever Option: V217-XX Fairfield Wall Mounted Basin Spout. V247-XX Fairfield Wall Mounted Bath Spout. V246-XX Fairfield Wall Mounted Bath Spout (Spout Only set). Control number once Controller is chosen: V2K17M-XX Fairfield Wall Mounted Basin Filler Trim Set with Metal Levers. V2K17C-XX Fairfield Wall Mounted Basin Filler Trim Set with Ceramic Levers. V2K17GBC-XX Fairfield Wall Mounted Basin Filler Trim Set with Gloss Black Chrome Levers. V2K17W-XX Fairfield Wall Mounted Basin Filler Trim Set with Wooden Levers. V2K17X-XX Fairfield Wall Mounted Basin Filler Trim Set with Cross Tops. V2K17SC-XX Fairfield Wall Mounted Basin Filler Trim Set with Geometric Clear Crystal Levers. V2K17SB-XX Fairfield Wall Mounted Basin Filler Trim Set with Geometric Black Crystal Levers. V2K47M-XX Fairfield Wall Mounted Bath Filler Trim Set with Metal Levers V2K47C-XX Fairfield Wall Mounted Bath Filler Trim Set with Ceramic Levers. V2K47GBC-XX Fairfield Wall Mounted Bath Filler Trim Set with Gloss Black Chrome Levers. V2K47W-XX Fairfield Wall Mounted Bath Filler Trim Set with Wooden Levers. V2K47X-XX Fairfield Wall Mounted Bath Filler Trim Set with Cross Tops. V2K47SC-XX Fairfield Wall Mounted Bath Filler Trim Set with Geometric Clear Crystal Levers. V2K47SB-XX Fairfield Wall Mounted Bath Filler Trim Set with Geometric Black Crystal Levers. Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered. The tap V217-XX & V247XX (without controller) is not approved in its own right and the model section state this option must always be installed in conjunction with a controller.

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2209043

Range of two-hole single outlet (fixed) combination tap assemblies with chrome plated brass bodies. The product incorporates a ceramic cartridge headwork. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:
0510 Combination Tap Assemblies
Description:
Two hole tap with a single outlet and a fixed spout.
Size:
Stainless steel braided, PEX lined hose assemblies incorporating 1/2" BSP captive nut end connections.
Marking:
Samuel Heath on base of tap
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/09/2027
Model:
V713V2-1F-XX 2 Hole basin mixer with pop-up waste 2 Hole basin mixer with pop-up waste, 139mm spout height V713V2-1K-XX 2 Hole basin mixer with pop-up waste 2 Hole basin mixer with pop-up waste, 139mm spout height V713V2-2F-XX 2 Hole basin mixer with pop-up waste 2 Hole bath mixer, 196mm spout length V713V2-2K-XX 2 Hole basin mixer with pop-up waste 2 Hole bath mixer, 196mm spout length V713V2-3F-XX 2 Hole basin mixer with pop-up waste 2 Hole basin mixer with pop-up waste, 259mm spout height V713V2-3K-XX 2 Hole basin mixer with pop-up waste 2 Hole basin mixer with pop-up waste, 259mm spout height Models added October 2023: V7K13S-1YY-XX V7K13S-2YY-XX V7K13S-3YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, or URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the controller options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Levers, or XF = Pure Cross Tops.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2209059

Overhead shower outlet with a chromium plated brass body. The inlet incorporates a plastic flow restrictor. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Description:
Shower heads and shower handsets
Open outlet use only.
Size:
½” BSP (F)
Marking:
SHS on rear of body
Installation Requirements:
R001 R040
Expiry date:
30/09/2027
Model:
V189-W 300mm Easy clean shower head

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2211039

Range of three-hole, single outlet (fixed) combination tap assemblies (brass body with various finishes) incorporating quarter turn ceramic disc headworks and various operating members (see models). The products are supplied with or without a lever type operated pop-up waste (see models) and the spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0650 Combination Tap Assemblies
Description:
Three hole tap with a single outlet and a fixed spout.
No testing performed on pop up waste.
Size:
1/2" BSP (M).
Marking:
SHS on underside of operating member.
Installation Requirements:
R001 R006 R007 R010
Expiry date:
30/11/2027
Model:
Model: Style Moderne V6K14YY-XX: 3H Basin Filler with pop up waste V6K14YYNP-XX: 3H Basin Filler without pop up waste Where the product code suffix YY denotes the controller options. It will always be 1,2 or 3 digits, which can be any combination of letters. As examples: M = Metal Levers, or CCR = Clear Glass Levers. Where the product code suffix XX denotes the surface finish. It will always be 2 or 3 digits, which can be a combination of numbers and/or letters. As examples: CP = Chrome Finish, or CTB = City Bronze.
Product Images

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 10

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.