'PlastFast/Plast Electrofusion Fittings'. Black coloured, injection moulded HDPE electrofusion fittings. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2109526

Expiry date:

30/09/2026

Approval Holder:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

View All Listings by this Company

'Plast Butt Fusion Fittings'. Black coloured, injection moulded HDPE butt fusion fittings. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

241155047

Expiry date:

30/11/2029

Approval Holder:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

View All Listings by this Company

A range of black polyethylene electrofusion fittings from DN 20 to DN 1200 for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. A range of black polyethylene butt-welded fittings from DE 20 to DE 1200 fittings for use with PE100 and PE100-RC pipes conforming to EN 12201 or ISO 4427. Maximum working pressure: 20.0 bar for SDR 9 Maximum working pressure: 16.0 bar for SDR 11 Maximum working pressure: 10.0 bar for SDR 17. For above and below ground and cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241204003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Plastialia logo, DN, PE100-RC, model code hot stamped on fitting body

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

ELECTROFUSION FITTINGS PLASTFAST RANGE DN20 to DN400 PLAST RANGE DN450 to DN1200 BUTTWELDED FITTNGS PLAST RANGE DN 20 to DN1200 COUPLER MPXXXB - COUPLER SDR 17 - DN 90 – DN1200 MPXXXC - COUPLER SDR 11 - DN 20 – DN900 MPXXXG - COUPLER SDR 9 - DN 32 – DN450 ELBOW 90° GE9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN315 ELBOW 45° GE4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 315 ELBOW 22.5° GE2250PXXXC - ELBOW 22,5° SDR 11 - DN 90 – DN 315 ELBOW 11,25° GE1125PXXXC - ELBOW 11,25° SDR 11 - DN 90 – DN 315 TEE 90° TEPXXXC - TEE 90° SDR 11 - DN 20 – DN 315 REDUCED TEE 90° TREPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 315 DN REDUCER REPXXXC - REDUCER SDR 11 - DN 25 – DN 315 END CAP CAEPXXXC - END CAP SDR 11 - DN 20 – DN 315 TAPPING TEE CPCPXXXC - TAPPING TEE SDR 11 - DN 40 – DN 315 CPCPVXXXC - VALVE TAPPING TEE SDR 11 - DN 63 – DN 315 SADDLE CPSPXXXC - SADDLE SDR11 – DN 20 – DN 900 SPIGOT END FITTING ADAPTER FOR FLANGES CPXXXB - ADATTATORE PER FLANGE SDR 17 - DN 90 – DN 1200 CPXXXC - ADATTATORE PER FLANGE SDR 11 - DN 20 – DN 900 CPXXXG - ADATTATORE PER FLANGE SDR 9 - DN 32 – DN 450 END CAPS CAPXXXB - END CAP SDR 17 - DN 90 – DN 1200 CAPXXXC - END CAP SDR 11 - DN 20 – DN 900 CAPXXXG - END CAP SDR 9 - DN 32 – DN 450 TEE 90° TPXXXB - TEE 90° SDR 17 - DN 90 – DN 630 TPXXXC - TEE 90° SDR 11 - DN 20 – DN 630 TPXXXG - TEE 90° FROM DE 63 TO DE 630 SDR 9 - DN 32 – DN 450 REDUCED TEE 90° TRPXXXB - REDUCED TEE 90° SDR 17 - DN 90 – DN 630 TRPXXXC - REDUCED TEE 90° SDR 11 - DN 90 – DN 630 TRPXXXG - REDUCED TEE 90° SDR 9 - DN 110 – DN 450 CROSS CRPXXXB - CROSS SDR 17 - DN 90 – DN 355 CRPXXXC - CROSS SDR 11 - DN 63 - DN, 355 TEES 45° T4PXXXB - TEE 45° SDR 17 - DN 90 – DN 160 T4PXXXC - TEE 45° SDR 11 - DN 20 – DN 160 ELBOW 90° G9PXXXB - ELBOW 90° SDR 17 - DN 90 – DN 630 G9PXXXC - ELBOW 90° SDR 11 - DN 20 – DN 630 G9PXXXG - ELBOW 90° SDR 9 - DN 63 – DN 450 ELBOW 45° G4PXXXB - ELBOW 45° SDR 17 - DN 90 – DN 630 G4PXXXC - ELBOW 45° SDR 11 - DN 20 – DN 630 G4PXXXG - ELBOW 45° SDR 9 - DN 63 – DN 450 DN REDUCER FITTINGS RPXXXB - REDUCER SDR 17 - DN 110 – DN 1200 RPXXXC - REDUCER SDR 11 - DN 25 – DN 900 RPXXXG - REDUCER SDR 9 - DN 250 – DN 450 TRANSITIONAL FITTINGS RTOMPXXXC - MALE TRANSITION PE/BRASS SDR 11 – DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTOFPXXXC - FEMALE TRANSITION PE/BRASS SDR 11 - DE 20x1/2”, 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” RTFZRPXXXC - MALE TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” RTSRPXXXC - WELD TRANSITION PE/STEEL SDR 11 - DE 25x3/4”, 32x1”, 40x1 1/4", 50x1 ½", 63x2", 75x2 ½", 90x3”, 110x4” 125x4”, 140x5”, 160x6”, 180x6”, 225x8”, 315x10” First part explains the type of product (e.g. “M = coupler”, “GE9 = 90°elbow”, etc.) PXXXX is the dimension. B, C and G represent the different SDR.

Product Images

Manufacturer:

Plastitalia SpA

Company Name

Plastitalia SpA

Address

Via Ferrara SNC, Brolo 98061

View All Listings by this Company