Water Regulations Approval Scheme Ltd

Neoperl GmbH Approvals

WRAS Approval Number: #2110340

OH Softpex® range of polyethylene lined outlet hoses with stainless steel and polyamide braiding (length 100 to 1000 mm), with various end connections. The hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110340
Expiry date:: 31/10/2026
Note:: Open outlet use only
Size:: DN6, DN8
Marking:: Neoperl, date (YYMMDD) on crimp
Installation Requirements:: R001 R008
Model:: OH Softpex® range; Part code: 39.90CD.EFG.HI Connection Sizes Quick connectors SQC Female M15 x 1 Male M8, M10, M12 Plugin D8 39.90CD.EFG.HI OH Softpex® Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information
Factor:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:: Neoperl Bulgaria EOOD | NPI Italia Srl | Neoperl Faucet Components (Jiangmen) Co. Ltd | Neoperl GmbH | Neoperl Nordic A/S | Neoperl Iberica S.A.

Company Name
Neoperl Bulgaria EOOD | NPI Italia Srl | Neoperl Faucet Components (Jiangmen) Co. Ltd | Neoperl GmbH | Neoperl Nordic A/S | Neoperl Iberica S.A.
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2110370

‘OH RPE’ Range of PE-RT (multi-layer) flexible hoses (white inner/silver outer). The following end connections are available with one or two approved single check valve cartridge(s), however, the complete product has not been fully tested to demonstrate it provides backflow protection: CQC (one) and SQC (one or two). Maximum operating temperature 65°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2110370
Expiry date:: 31/10/2026
Size:: Bore diameter: DN6. Quick connect (CQC and SQC): D6. Female: M15x1. Male: M8 to M12. Plug in: D10,5 & D12.
Marking:: Neoperl logo, 21 (manufacturing location) and date of manufacture (YY/WW) on crimped connector
Installation Requirements:: R001
Model:: OH RPE RANGE - MODEL: 39.97CD.EFG.HI Part code nomenclature constructed in the following manner: 39.ABCD.EFG.HI A = Hose Type, B = Hose Material, CD.EFG = Manufacturing sequential number, HI = Packaging information.
Factor:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:: Neoperl Bulgaria EOOD, NPI Italia Srl, Neoperl Faucet Components (Jiangmen) Co., Ltd

Company Name
Neoperl Bulgaria EOOD, NPI Italia Srl, Neoperl Faucet Components (Jiangmen) Co., Ltd
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2111318

Range of check valve cartridges with plastic bodies to be housed in specifically dimensioned bodies. The product incorporates a plastic flow regulator. Maximum working pressure 16.0 bar & maximum operating temperature 65°C.

Section:: 0026 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:: 2111318
Expiry date:: 30/11/2026
Size:: DN10
Marking:: Neoperl, flow arrow, CV14 on body.
Installation Requirements:: R001
Model:: Description Part Code CV14-FR 1.0 gpm 31.4143.0 CV14-FR 2,0L 31.4144.0 CV14-FR 3,0L 31.4146.0 CV14-FR 3,5L 31.4147.0 CV14-FR 4,0L 31.4148.0 CV14-FR 1.2 gpm 31.4149.0 CV14-FR 5,0L 31.4150.0 CV14-FR 1.5 gpm 31.4151.0 CV14-FR 6,0L 31.4152.0 CV14-FR 1.75 gpm 31.4153.0 CV14-FR 7,0L 31.4154.0 CV14-FR 2.0 gpm 31.4155.0 CV14-FR 8,0L 31.4156.0 CV14-FR 2.2 gpm 31.4157.0 CV14-FR 9,0L 31.4158.0 CV14-FR 2.5 gpm 31.4159.0 CV14-FR 10,0L 31.4160.0 CV14-FR 12,0L 31.4164.0 CV14-FR 15,0L 31.4165.0
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2112301

Flexcore® Range of polyethylene lined flexible hoses incorporating (stainless steel or polyamide braiding and various end connections. Maximum operating temperature 65°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2112301
Expiry date:: 31/12/2026
Size:: Bore Diamter DN8 to be supplied with the following end connectors: DN8 Quick Connector (available with single check valve cartridge variants) Female ½” Male M10 Plugin D9, D10
Marking:: Neoperl logo and date of manufacturer (YYMMDD) on crimp
Installation Requirements:: R001 R008
Model:: 39.96CD.EFG.HI OH Flexcore® Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information
Factor:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:: Neoperl Bulgaria EOOD & Neoperl Italia Srl

Company Name
Neoperl Bulgaria EOOD & Neoperl Italia Srl
Address
Pop Bogomil Str, N1B, 09301, Dobrich
General Email

View All Listings by this Company

WRAS Approval Number: #2203334

Spout end flow control device (aerator with ‘switchable’ spray formation). Maximum operating temperature 65°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2203334
Expiry date:: 31/03/2027
Note:: Open outlet use only
Size:: M24 threaded connection
Marking:: Neoperl on body
Installation Requirements:: R001 R040
Model:: 01.3098.90 VarioDuo Aerator Model added April 2022: 01.3098.91 VarioDuo Aerator
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2206801

Range of check valve cartridges with plastic bodies to be housed in specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C

Section:: 0026 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:: 2206801
Expiry date:: 30/06/2027
Size:: 31.4134.0: DN10 31.4114.0 DN10 31.4015.0 DN10
Marking:: 31.4114.0 & 31.4134.0 models: Neoperl logo, flow arrow, CV14, DN10 on body. 31.4015.0: Neoperl logo, flow arrow, CV15, DN10 on body.
Installation Requirements:: R001
Model:: CV14/DN10 31.4114.0 CV14/DN10-AF 31.4134.0 CV15/DN10 31.4015.0
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2005372

Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2005372
Expiry date:: 31/05/2025
Note:: Please note that DN6 & DN8 hoses are manufactured at all sites. DN10, DN13 & DN15 hoses are manufactured only by NPI Italia Srl. & Neoperl Nordic A/S.
Size:: Bore diameters DN6 & DN8 may be supplied with the following end connections: Female elbow ⅜, ½, ¾”. Female ⅜, ½, ¾, 7/16, 9/16”. Tube ø8 - ø12. Male M8, M10, M12, M15. Male ⅜, ½, ¾, 7/16, 9/16”. Comp. joint ø8 - ø15. Plugin D7- D13. Bore diameter DN10 may be supplied with the following end connections: Female elbow ½, ¾”. Female ½, ¾, 1”. Tube ø8 - ø15. Male M8, M10, M12, M15. Male ½, ¾, 1”. Bore diameter DN13 may be supplied with the following end connections: Female elbow ¾”. Female ¾, 1”. Male ¾, 1”. Bore diameter DN15 may be supplied with the following end connections: Female 1”. Male 1”. Models added July 2021: Male M11 Bore diameter DN10 supplied with the following end connections: Female elbow 3/8”, Female 3/8”, Male 3/8” DN13 supplied with the following end connections: Female elbow ½ Female ½, Tube ø15, Male ½ DN15 supplied with the following end connections: Female elbow ¾ Female ¾, Tube ø15, Male ½, ¾
Marking:: Neoperl, SPX or (from January 2020) Softpex, 70°C, 10bar, DN, size & date of manufacture (YYMMDD) on end connection.
Installation Requirements:: R001 R008
Model:: UNIFLEX RANGE 93 V XX XX XXXX RANGE OF PEX LINED FLEXIBLE HOSE ASSEMBLIES Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.). B = Hose (inliner) Material CD.EFG = Manufacturing sequential number. HI = Packaging information.
Factor:: Broen-Lab A/S

Company Name
Broen-Lab A/S
Address
Drejervaengtetr 2 5610 Assens Denmark

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2207802

Range of aerators with plastic bodies and chrome plated brass housing. Open outlet use only. Maximum operating temperature 65°C

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2207802
Expiry date:: 31/07/2027
Size:: SEE MODELS
Marking:: Neoperl on housing
Installation Requirements:: R001
Model:: 01.0412.0 ATOMIZER TT SINGLE-JET 0.25 F M16X1: M16x1 thread 01.0413.0 ATOMIZER TT SINGLE-JET 0.25 M M18X1: M18X1 thread 01.0418.0 ATOMIZER STD TRIPLE-JET M M24X1: M24X1 thread 01.0419.0 ATOMIZER STD TRIPLE-JET F M22X1: M22X1 thread 01.0420.0 ATOMIZER TRIPLE-JET M M24X1.5: M24X1.5 thread 01.0421.0 CACHÉ ATOMIZER M M24X1.5: M24X1.5 thread 01.0424.0 ATOMIZER STD SINGLE-JET F M22X1: M22X1 thread 01.0423.0 ATOMIZER STD SINGLE-JET M M24X1: M24X1 thread 01.0425.0 ATOMIZER STD SINGLE-JET 0.25 M M24X1: M24X1 thread 01.0426.0 ATOMIZER STD SINGLE-JET 0.25 F M22X1: M22X1 thread
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2205566

'NP-PET 00N'. Natural (appears white in colour), extruded PET mesh screen. For use with water up to 70°C.

Section:: 5246 Polyethylene Terephthalate (PET)
WRAS Approval Number:: 2205566
Expiry date:: 31/05/2027
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2207328

Range of pressure limiter with stainless steel spring, plastic or chrome plated brass bodies. A5.0022.0 and A5.0027.0 incorporate with a stainless-steel mesh filter. Maximum working pressure 10.0 Bar. Maximum operating temperature 65˚C.

Section:: 1530 Miscellaneous Fittings
WRAS Approval Number:: 2207328
Expiry date:: 31/07/2027
Note:: Pressure limiting claims made by the manufacturer have not been verified by test.
Size:: see model
Marking:: A5.0006.0, A5.0014.0, A5.0022.0, A5.00229.0, A5.0027.0: Neoperl moulded on body of insert, Neoperl & direction flow arrow etched on body A5.0004.0, A5.0010.0, A5.0020.0, A5.0025.0: Neoperl moulded on body of insert
Installation Requirements:: R001
Model:: A5.0004.0 Pressure Limiter D 1bar insert - 18.57mm OD A5.0006.0 Pressure Limiter G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0010.0 Pressure Limiter 2 bar insert - 18.57mm OD A5.0014.0 Pressure Limiter D G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0020.0 Pressure Limiter DS 1 bar insert - 18.57mm OD A5.0022.0 Pressure Limiter DS G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0025.0 Pressure Limiter DS 2 bar insert - 18.57mm OD A5.0027.0 Pressure Limiter DS G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0029.0 Pressure Limiter DS G1/2 2 bar - OF - ½”BSP(F) x ½”BSP(M)
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Phone
0049 7631 1880

View All Listings by this Company