Range of floor standing gas fired combination boilers providing domestic hot water via a stainless-steel plate heat exchanger. Unit is supplied with a safety relief valve (8.0 bar). Maximum working pressure 7.5 bar. Maximum operating temperature 85°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2111371

Size:

2 ½” BSP (M)

Marking:

Lochinvar on front casing. Lochinvar , model & serial number on adhesive label on body

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2026

Model:

TTW410 & TTW580 FLOOR STANDING GAS FIRED COMBINATION BOILERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of direct gas fired condensing water heaters with a stainless steel body. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504725

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Lochinvar on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

LGSS 200-600 LGSS 200-780 WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Lochinvar on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

LGC 160-210 CE LGC 200-210 CE LGC 160-350 CE LGC 200-350 CE LGC 245-420 CE LGC 285-420 CE LGC 245-560 CE LGC 285-560 CE LGC 380-560 CE WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of stainless steel lined direct water heaters fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504726

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Lochinvar on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SIVS 66 G E SIVS 100 G E SIVS 110 G E SIVS 130 G E SIVS 165 G E SIVS 220 G E SIVT 66 G E SIVT 100 G E SIVT 110 G E SIVT 130 G E SIVT 165 G E SIVT 220 G E LST 66 G E LSTR 66 G E LST 100 G E LSTR 100 G E LST 110 G E LSTR 110 G E LST 130 G E LSTR 130 G E LST 165 G E LSTR 165 G E LSTR 220 G E LST 220 G E

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of indirect water heaters with an enamel lining, a magnesium sacrificial anode and single wall spiral heat exchanger (maximum working pressure 6.0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 7.0 bar. Maximum operating temperature 80°C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

Lochinvar on adhesive label on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

SIVS 330 G E SIVS 440 G E SIVS 550 G E SIVS 660 G E LST 330 G E LST 440 G E LST 550 G E LST 660 G E

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of direct gas fired condensing storage water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

ECH 32-220 CE ECH 33-370 CE ECH 52-370 CE ECH 63-370 CE ECH 87-480 CE ECH 106-480 CE ECH 129-480 CE HWH 32-220 CE HWH 33-370 CE HWH 52-370 CE HWH 63-370 CE HWH 87-480 CE HWH 106-480 CE HWH 129-480 CE WATER HEATERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Range of solar assisted direct gas fired condensing storage water heaters with an enamel lining and a titanium anode incorporating a solar heat exchanger (max. working pressure 6,0 bar). Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 80°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP(M) inlet.

Marking:

Lochinvar on control board.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

HWHC 44-370 CE HWHC 63-370 CE

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company