Range of wall mounted shower outlets with brass bodies (various finishes). The 24 004 xxx, 24 014 xxx and 35 279 xxx models are supplied with ceiling mounted shower arm. The 24 005 xxx, 24 015 xxx, 35 275 xxx and 35 280 xxx supplied with wall mounted shower arm. The 24 005 xxx, 24 015 xxx, 35 275 xxx & 35 280 xxx models incorporate stainless steel strainers on the inlet. The 24 014 xxx & 24 015 xxx models incorporate plastic flow regulators on the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

2006045

Expiry date:

30/06/2025

Marking:

24 004 xxx, 24 014 xxx, 24 005 xxx & 24 015 xxx models: Hansgrohe on faceplate. 35 275 xxx, 35 279 XXX & 35 280 xxx models: AXOR on faceplate.

Installation Requirements:

R001 R040

Model:

The following models are for use with the 24 010 180 Hansgrohe Rainmaker Select basic set overhead shower ceiling connector: 24 24 004 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower with ceiling connector 100 mm). 24 014 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower EcoSmart 9 l/ min with ceiling connector 100 mm). 35 279 xxx AXOR ShowerSolutions Overhead shower 460 / 300 (2jet with ceiling connector). The following models are for use with the 01 800 180 Basic set iBox universal: 24 005 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower with shower arm 450 mm). 24 015 xxx Hansgrohe Rainmaker Select 460 (2jet overhead shower EcoSmart 9 l/min with shower arm 450 mm). 35 275 xxx AXOR ShowerSolutions Overhead shower 460 / 300 (2jet with shower arm and softcube escutcheons). 35 280 xxx AXOR ShowerSolutions Overhead shower 460 / 300 (2jet with shower arm and square escutcheons). with rough 01800180 Where xxx denotes the surface finish, which can be replaced by any combination of numbers and/or letters. As examples, but not limited to: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted concealed modular thermostatic mixing valve (brass body). The product is supplied with a shower hose and handset and incorporates additional outlet ports to supply shower outlet configuations controlled by push button flow control headworks. Primary flow control is via a half turn ceramic disc headwork and dome type operating member. The temperature is controlled independently via a thermostatic cartridge and dome operating member. Inlets incorporate stainless steel strainers and single check valve cartirgdes however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2006331

Expiry date:

30/06/2025

Size:

¾” BSP (F) inlets & ½” BSP (F) outlets

Marking:

Axor on faceplate and shower handset.

Installation Requirements:

R001 R010 R040

Model:

46 700 xxx AXOR EdgeThermostatic module Select 470/100 for concealed installation for 2 functions 46 701 xxx AXOR Edge Thermostatic module Select 470/100 for concealed installation for 2 functions - diamond cut 18 310 180 AXOR Basic set for thermostatic module Select for 2 functions. 46 710 xxx AXOR Edge Thermostatic module Select 540/100 for concealed installation for 3 functions 46 711 xxx AXOR Edge Thermostatic module Select 540/100 for concealed installation for 3 functions - diamond cut 18 311 180 AXOR Basic set for thermostatic module Select for 3 functions. 46 720 xxx AXOR Edge Thermostatic module Select 610/100 for concealed installation for 4 functions 46 721 xxx AXOR Edge Thermostatic module Select 610/100 for concealed installation for 4 functions - diamond cut 18 312 180 AXOR Basic set for thermostatic module Select for 4 functions. 46 730 xxx AXOR Edge Thermostatic module Select 680/100 for concealed installation for 5 functions 46 731 xxx AXOR Edge Thermostatic module Select 680/100 for concealed installation for 5 functions - diamond cut 18 313 180 AXOR Basic set for thermostatic module Select for 5 functions. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted bath spout incorporating a brass body (various finishes) and a plastic aerator. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2010701

Expiry date:

31/10/2025

Marking:

AXOR on top of spout. Urquiola on underside of spout.

Installation Requirements:

R001 R040

Model:

11 430 xxx AXOR Urquiola Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples; 000 = Chrome optic finish, 800 = PVD stainless steel optic

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted spout outlet (various finishes, see model) incorporating a plastic flow straightener. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlets.

WRAS Approval Number:

2008703

Expiry date:

31/08/2025

Size:

¾” BSP (M)

Marking:

Hansgrohe on spout

Installation Requirements:

R001 R040

Model:

15 412 xxx Hansgrohe PuraVida Bath spout Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish & 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company