Range of wall mounted spout outlets (brass with various finishes), which also incorporate a plastic aerator. Maximum operating temperature 60°C.

• Section: 0682 Combination Tap Assemblies
• Section Subtitle: Spout outlets.
• WRAS Approval Number: 1710005
• Expiry date: 31/10/2022
• Note: Open outlet use only.
• Size: ¾ “ BSP (M)
• Marking: Axor logo on base plate
• Installation Requirements R001 R040
• Model
  38 411 xxx - Axor Uno 45 410 xxx - Axor Puro Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

Wall mounted two hole, single outlet (fixed) combination tap assembly (brass with various finishes) incorporating a ceramic cartridge headworks controlling temperature and flow using a single lever operating member. The assembly also incorporates a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Shower outlet connection incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

• Section: 0530 Combination Tap Assemblies
• Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
• WRAS Approval Number: 1710006
• Expiry date: 31/10/2022
• Note: Not supplied with a shower hose and handset.
• Size: ½” BSP (M)
• Marking: AXOR Hansgrohe on top of body
• Installation Requirements R001 R030
• Model
  39 400 xxx AXOR Citterio Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

‘Metris’ three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with lever operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

• Section: 0650 Combination Tap Assemblies
• Section Subtitle: Three hole, metal, single outlet, fixed.
• WRAS Approval Number: 1710007
• Expiry date: 31/10/2022
• Note: No testing performed on pop-up waste.
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: Hansgrohe on base of spout.
• Installation Requirements R001 R006 R007 R009 R010
• Model
  31 083 xxx - Metris Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

Axor Uno²’ three hole, single outlet (swivel) combination tap assemblies (brass, available in various customised finishes), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

• Section: 0660 Combination Tap Assemblies
• Section Subtitle: Three hole, metal, single outlet, swivel.
• WRAS Approval Number: 1710008
• Expiry date: 31/10/2022
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: AXOR & Hansgrohe on base of body.
• Installation Requirements R001 R006 R007 R009 R010
• Model
  38 053 xxx - Axor Uno² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

‘Hansgrohe Metris’ single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

• Section: 0470 Combination Tap Assemblies
• Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
• WRAS Approval Number: 1710009
• Expiry date: 31/10/2022
• Note: No testing performed on pop-up waste
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: Hansgrohe logo on base of body.
• Installation Requirements R001 R006 R009 R010
• Model
  31 087 xxx – Hansgrohe Metris Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

Hansgrohe Talis S’ three hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with lever operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

• Section: 0650 Combination Tap Assemblies
• Section Subtitle: Three hole, metal, single outlet, fixed.
• WRAS Approval Number: 1710010
• Expiry date: 31/10/2022
• Note: No testing performed on pop up waste.
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: Hansgrohe on base front of tap spout.
• Installation Requirements R001 R006 R007 R009 R010
• Model
  72 130 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

Hansgrohe Logis Monotrou’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The assembly also incorporates a self-cancelling diverter to shower outlet. The connection to shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

• Section: 0465 Combination Tap Assemblies
• Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
• WRAS Approval Number: 1710011
• Expiry date: 31/10/2022
• Note: Not supplied with a shower hose and handset.
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections
• Marking: Hansgrohe on operating member
• Installation Requirements R001 R006 R009 R030
• Model
  71 312 xxx - Hansgrohe Logis Monotrou Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

Axor Montreux’ range of single hole, single outlet (swivel) combination tap assemblies (brass, in various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator and flow regulator. Model 16 517 xxx is also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

• Section: 0470 Combination Tap Assemblies
• Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
• WRAS Approval Number: 1710012
• Expiry date: 31/10/2022
• Note: No testing performed on pop-up waste.
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: AXOR on front of body. Montreaux on rear of body.
• Installation Requirements R001 R006 R009 R010
• Model
  16 517 xxx Axor Montreux (with PUW) 16 518 xxx Axor Montreux Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

Axor Montreux’ single hole, single outlet (swivel) combination tap assemblies (brass, in various finishes), incorporating a ceramic cartridge headwork and a single lever operating member. The outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

• Section: 0470 Combination Tap Assemblies
• Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
• WRAS Approval Number: 1710013
• Expiry date: 31/10/2022
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: AXOR on base of body
• Installation Requirements R001 R006 R009 R010
• Model
  16 580 xxx - Axor Montreux Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company

‘Axor Uno’ range of single hole, single outlet (fixed) combination tap assemblies (brass, in various finishes), incorporating ceramic cartridge headworks, and either single lever (38 models) or dome type (45 models) operating members. The spout outlet incorporates a plastic aerator. Models 38 023 xxx & 45 001 xxx are also supplied with a pop-up waste. Maximum working pressure: 10.0 bar. Maximum operating temperature 60ºC.

• Section: 0450 Combination Tap Assemblies
• Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
• WRAS Approval Number: 1710014
• Expiry date: 31/10/2022
• Note: No testing performed on pop-up waste.
• Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
• Marking: Axor on operating member Uno on back of body
• Installation Requirements R001 R006 R009 R010
• Model
  38 021 xxx - Axor Uno 70 38 023 xxx - Axor Uno 100 (with PUW) 38 026 xxx - Axor Uno 100 38 032 xxx - Axor Uno 190 38 034 xxx - Axor Uno 250 45 001 xxx - Axor Uno 110 (with PUW) 45 002 xxx - Axor Uno 110 45 003 xxx - Axor Uno 200 45 004 xxx - Axor Uno 260 45 005 xxx - Axor Uno 80 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
• Manufacturer: Hansgrohe SE
  Company Name

  Hansgrohe SE

  Address

  Auestrasse 5 - 9, 77761 Schiltach
  View All Listings by this Company