Hansgrohe SE Approvals

#241002004

Thermostatic cartridge incorporating a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
241002004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
30mm O.D.
Marking:
HG on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
30615930.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#241002006

Range of wall mounted, thermostatic shower valves with brass bodies (various finishes) incorporating ceramic disc headwork with dome type operating members which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. The inlet to the overhead shower incorporates a plastic flow regulator. The inlets to the valve body and the outlet to the shower handset incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with an overhead shower outlet, riser rail, shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP offset union (M).
Marking:
Hansgrohe on body, shower pole and head
Installation Requirements:
R001 R030
Expiry date:
31/10/2029
Model:
24 222 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat. 24 223 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat. 24 236 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat and hand shower 3jet. 24 237 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat and hand shower 3jet. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#241002011

Range of installation kits with brass bodies and plastic housings with multiple inlets. The kits incorporate housings that are intended for a flow control cartridge and a spout connection. Models 01 750 180 and 01 850 180 incorporate a servicing valve on the inlet. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
241002011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (F)
Marking:
Hansgrohe logo and model code on adhesive label on the inside of the plastic housing
Installation Requirements:
R001 R040
Expiry date:
31/10/2029
Model:
01 700 180 AXOR iBox universal 01 750 180 AXOR iBox universal 01 850 180 hansgrohe | iBox universal 16 182 180 AXOR Uno
Product Images
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718

View All Listings by this Company

Print This Approval

#241002020

Range of two-way manual diverter valves with shut-off position. Products are for insertion into specifically dimensioned bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
241002020
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
26mm O.D.
Marking:
HG on body
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
30079500 & 30650210
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#241002025

Range of elastomeric shower hoses with EPDM lining and ‘O’-rings. The product incorporates a flow restrictor. Maximum operating temperature 60.0°C Open outlet use only

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241002025
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (F)
Marking:
Hansgrohe logo on flow control (models 28 249 xx0 & 28 248 xx0 AXOR logo on flow control (all other models)
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
AXOR 28 127 xx0 28 128 xx0 30 246 018 Hansgrohe 28 249 xx0 28 248 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 75 of 81

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.