Hansgrohe SE Approvals


#240202027

Pillar tap with (brass body - various finishes) incorporating a quarter turn ceramic disc headwork situated on the spout outlet with a cylinder type operating member. The spout outlet incorporates a plastic spray disc and a flow regulator. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
1800 Taps
Section Subtitle:
Pillar tap(s).
WRAS Approval Number:
240202027
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8 captive nut end connections
Marking:
AXOR on body
Installation Requirements:
R001 R006 R009
Expiry date:
28/02/2029
Model:
12 110 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202033

Range of four-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The products are supplied with a shower hose and handset. The shower handset inlet incorporates a plastic strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
240202033
Note:
The products are to be used with rough kit 13 444 180 Hansgrohe basic set for 4-hole rim mounted bath mixer or 15 480 180 AXOR basic set for 4-hole rim mounted bath mixer which are not part of this approval
Size:
Specifically for use with rough kit 13 444 180 or 15 480 180 which both have ½” BSP (M) inlets
Marking:
Axor or Hansgrohe on spout
Installation Requirements:
R001 R006 R020
Expiry date:
28/02/2029
Model:
39 446 xx0 (lever) 39 445 xx0 (cross top) 31 442 xx0 (lever) 16 546 xx0 (cross top) Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240204013

Range of wall mounted, thermostatic blending valves, (brass bodies various finishes), incorporating a quarter turn ceramic disc headwork controlling the flow.Temperature is controlled independently via a thermostatic cartridge with a manual override button incorporating dome or lever type operating members, Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240204013
Size:
½” BSP (M) x ¾” BSP (M) offset unions.
Marking:
Hansgrohe on body
Installation Requirements:
R001 R010 R040
Expiry date:
28/02/2029
Model:
13 113 xx0 Hansgrohe Ecostat 13 116 xx0 Hansgrohe Ecostat 13 117 xx0 Hansgrohe Ecostat 15 368 xx0 Hansgrohe Versostat 13 324 xx0 Hansgrohe Ecostat Fine 13 346 xx0 Hansgrohe Element Models added May 2024: 13 323 xx0 & 13 382 xx0.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202056

Range of overhead shower outlets with chromium plated plastic bodies. The inlets incorporate combined EPDM washers and stainless-steel strainers. Maximum working pressure: open outlet use only Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202056
Note:
Product to be used in combination with AXOR ShowerSolutions Basic set for overhead shower with shower arm 35361180 (W0758026).
Size:
12.59mm OD
Marking:
Axor on body.
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
12 596 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240202060

Range of shower arms and ceiling connectors (brass bodies – various finishes) & overhead shower outlets (plastic bodies - various finishes), incorporating EPDM O rings, plastic flow regulators and stainless-steel strainers. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202060
Size:
½” BSP M ½” BSP F 15mm Spigot
Marking:
Hansgrohe logo on side of shower
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
Raindance Select S: 30 149 198 Overhead shower 240 2jet, 30 149 298 Overhead shower 300 2jet, 26 466 xx0 Overhead shower 240 2jet with shower arm, 26 467 xx0 Overhead shower 240 2jet with ceiling connector, 27 378 xx0 Overhead shower 300 2jet with shower arm, 27 337 xx0 Overhead shower 300 2jet with ceiling connector. -020 PVD polished chrome -260 PVD brushed chrome. -830 PVD polished nickel -820 PVD brushed nickel. -990 PVD polished gold optic -250 PVD brushed gold optic. -300 PVD polished red gold -310 PVD brushed red gold. -130 PVD polished bronze -140 PVD brushed bronze. -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass. -800 PVD stainless steel optic
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 64 of 82

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.