Hansgrohe SE Approvals


WRAS Approval Number: 1710018

‘AXOR Starck Classic’ range of single hole, single outlet (fixed) combination tap assemblies (brass in a variety of finishes), incorporating ceramic cartridge headworks and joystick operating members. The spout outlets incorporate a plastic aerator. Models 10 010 xxx & 10 020 xxx are also supplied with a lever type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710018
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe and Axor on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 010 xxx – AXOR Starck Classic (with PUW), 10 018 xxx – AXOR Starck Classic, 10 020 xxx – AXOR Starck Classic (with PUW) & 10 028 xxx – AXOR Starck Classic. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1707030

Range of concealed flow control valves (brass bodies), incorporating either non-rising spindle or ¼ turn ceramic disc (15 974 180 only) headworks. Valve models are for use with trim kits utilising various operating members (see below). Kits are available in various finishes (denoted by xxx). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 2000 Valves
  • Section Subtitle: Blending, manually operated.
  • WRAS Approval Number: 1707030
  • Expiry date: 31/07/2022
  • Size: 15 974 180 & 15 973 180: ½” BSP (F) 15 970 180: ¾” BSP (F)
  • Marking: 15 974 180, 15 973 180 & 15 970 180 valves: Hansgrohe on body. Trim Kits: Axor and Hansgrohe on body.
  • Installation Requirements R001 R040
  • Model
    Concealed Valves: 15 974 180, 15 973 180 & 15 970 180 Trim Kits: 10 970 xxx Axor Starck (lever), 10 972 xxx Axor Shower (lever), 10 974 xxx Axor Starck X (lever), 11 960 xxx Axor Urquiola (cubed), 12 771 xxx Axor Starck Organic (dome), 16 871 xxx Axor Montreux (cross top), 16 872 xxx Axor Montreux (lever), 17 960 xxx Axor Carlton (lever), 17 965 xxx Axor Carlton (cross top), 18 770 xxx Axor Massaud (dome), 19 971 xxx Axor Bouroullec (dome), 34 960 xxx Axor Citterio M (lever), 34 980 xxx Axor Citterio M (three prong), 36 771 xxx Axor Citterio E (cross top), 38 976 xxx Axor Uno (dome), 39 960 xxx Axor Citterio (lever) & 39 965 xxx Axor Citterio (cross top).
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711063

Range of single hole, single outlet (swivel) combination tap assemblies (chrome or PVD stainless steel optic finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711063
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided PE-X lined flexible hose assembly with 3/8” captive nut end connection.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 820 xxx Hansgrohe Focus Single lever kitchen mixer 260. 73 882 xxx Hansgrohe M41 M411-H260 Single lever kitchen mixer 260. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711064

Range of overhead shower outlets with a brass body (various finishes). The inlets incorporate a flow regulator and stainless steel strainer. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711064
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Hansgrohe on body.
  • Model
    27 450 xxx Hansgrohe Croma 160 & 28 450 xxx Hansgrohe Croma 160. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711065

Overhead shower head (chromium plated brass) with optional spray settings. The shower head incorporates EPDM O-rings and metal strainers on the inlet. Maximum operating temperature 60°C.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711065
  • Expiry date: 30/11/2022
  • Size: Universal connector for Hansgrohe IBOX 12mm manifold.
  • Marking: Hansgrohe on backing plate
  • Installation Requirements R001 R040
  • Model
    28 411 xxx Hansgrohe Raindance Rainfall 240 Air 3jet overhead shower. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe S.A.S.
    Company Name
    Hansgrohe S.A.S.
    Address
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711066

Range of showers handsets with plastic bodies (chrome or white/chrome finish), incorporating a stainless steel strainer and flow regulator. Models 28 567 and 26 551 incorporate a multi-function spray setting. Maximum operating temperature 60ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711066
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (M)
  • Marking: Hansgrohe and PuraVida, on body.
  • Installation Requirements R001 R040
  • Model
    28 567 xxx Hansgrohe PuraVida 3jet hand shower EcoSmart 9 l/min. 26 551 xxx Hansgrohe Raindance Select E 150 3jet hand shower EcoSmart 9 l/min. 28 568 xxx Hansgrohe PuraVida 120 Air 1jet baton hand shower EcoSmart 9 l/min. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Factor: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company
  • Manufacturer: Hansgrohe Wasselonne S.A.S
    Company Name
    Hansgrohe Wasselonne S.A.S
    Address
    Parc d'activités les Pins, 67310 Wasselonne
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711067

Range of fixed, ceiling or wall mounted shower outlets with chromium plated brass bodies and EPDM `O` rings. And concealed mounting unit Maximum operating temperature 60°C

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711067
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (F)
  • Marking: Models 10 924 xxx, 10 925 xxx, 10 929 xxx: hansgrohe and axor logo on body, Model (10921180) Hansgrohe and model on adhesive label
  • Installation Requirements R001 R040
  • Model
    Functional block: 10 921 180 Axor AXOR ShowerCollection Basic set for overhead shower 240/240 1jet with shower arm For use with the following shower outlets: 10 924 xxx AXOR ShowerCollection Overhead shower 240/240 1jet 10 925 xxx AXOR ShowerCollection Overhead shower 240/240 1jet with shower arm 10 929 xxx AXOR ShowerCollection Overhead shower 240/240 1jet with ceiling connector Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711018

‘Axor Montreux’ range of three hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with either single lever (16 535 xxx) or cross top (16 536 xxx) operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0650 Combination Tap Assemblies
  • Section Subtitle: Three hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1711018
  • Expiry date: 30/11/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided TPSiV lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor on base of spout.
  • Installation Requirements R001 R005 R007 R009 R010
  • Model
    Axor Montreux Finish sets: 16 535 xxx & 16 536 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711019

‘Axor Starck’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and joystick operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711019
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Axor and Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    Axor Starck: 10 123 xxx & 10 129 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711020

‘Hansgrohe Talis’ single hole, single outlet (fixed) combination tap assemblies (brass bodies in various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711020
  • Expiry date: 30/11/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating 3/8” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 035 xxx - Hansgrohe Talis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 3 of 32