Hansgrohe SE Approvals


WRAS Approval Number: 1710015

‘Hansgrohe Talis’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. The product is also supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710015
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 080 xxx - Hansgrohe Talis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710016

‘Metris S’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The products incorporate a plastic aerator. Models 31 060 000 and 31 063 000 are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710016
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on handle.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 060 xxx - Metris S 31 063 xxx - Metris S 31 068 xxx - Metris S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710017

‘Hansgrohe Focus’ range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Models 31 603 000, 31 607 000, 31 608 000, 31 621 000 & 31 911 000 are also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710017
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating either ⅜” or ½” captive nut (31 517 010 only) end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 513 xxx - Hansgrohe Focus 100 LowFlow, 31 517 xxx - Hansgrohe Focus 100, 31 517 xxx - Hansgrohe Focus 100, 31 518 xxx - Hansgrohe Focus 190, 31 603 xxx - Hansgrohe Focus 100 LowFlow, 31 607 xxx - Hansgrohe Focus 100, 31 608 xxx - Hansgrohe Focus 190, 31 621 xxx - Hansgrohe Focus 100 CoolStart & 31 911 xxx - Hansgrohe Focus 100. Models Added February 2018: 31 915 xxx - Hansgrohe Focus 100 & 31 917 xxx - Hansgrohe Focus 100 CoolStart. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710019

‘Hansgrohe Talis S’ single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork controlling the flow and temperature with a single lever operating member. The spout outlet incorporates a plastic aerator which also incorporates a flow regulator. Model 32 020 000 is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710019
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on operating member.
  • Installation Requirements R001 R006 R009 R010
  • Model
    32 020 xxx - Talis S (with PUW). 32 031 xxx - Talis S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710020

‘Hansgrohe Metris’ range of single hole, single outlet combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Some models are supplied with a pop-up waste (see model). Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710020
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating either ⅜” or ½” (31 084 010 only) captive nut end connections.
  • Marking: Hansgrohe on operating member
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 080 xxx - Hansgrohe Metris 110 (with PUW), 31 082 xxx - Hansgrohe Metris 260 (with PUW), 31 084 xxx - Hansgrohe Metris 110, 31 084 xxx - Hansgrohe Metris 110 LowPressure, 31 203 xxx - Hansgrohe Metris 110 LowFlow (with PUW), 31 204 xxx - Hansgrohe Metris 110 LowFlow & 31 121 xxx - Hansgrohe Metris 110 CoolStart (with PUW). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710021

‘Axor Starck Classic’ single hole, single outlet (fixed), over the rim bidet combination tap assembly (brass, in various finishes) incorporating ceramic cartridge headwork and joystick type operating member. The spout outlet incorporates a swivel nozzle, with plastic aerator and flow regulator. The product is also supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0400 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single hole, metal.
  • WRAS Approval Number: 1710021
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe and AXOR on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    10 200 xxx - AXOR Starck Classic Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710022

‘Hansgrohe Focus S’ and ‘Hansgrohe Talis S’ ranges of single hole, single outlet (swivel), bidet combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks with a single lever operating member. The spout outlets incorporate a plastic aerator with a built in flow regulator. Models are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0410 Combination Tap Assemblies - Bidet
  • Section Subtitle: Single Hole - Metal Single Outlet - Swivel.
  • WRAS Approval Number: 1710022
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on base of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 710 xxx - Hansgrohe Focus S 360° 32 070 xxx - Hansgrohe Talis S 360° 32 073 xxx - HansgroheTalis S 120° Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710023

‘Hansgrohe Metris S’ and ‘Puro’ range of single hole, metal single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. Spout outlets incorporate a plastic aerator. Models 31 161 000 & 31 164 000 are also supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710023
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections
  • Marking: Hansgrohe on base of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    31 161 xxx - Hansgrohe Metris S 120º 31 164 xxx - Hansgrohe Metris Puro 120º 31 167 xxx - Hansgrohe Metris Puro 120º Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710024

‘Hansgrohe PureVida’ single hole, single outlet (fixed) combination tap assembly (brass, in various finishes), incorporating a ceramic cartridge headwork and joystick operating member. The spout outlet incorporates an aerator. Models are also supplied with either a click type or lever operated (15 074 xxx only) pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710024
  • Expiry date: 31/10/2022
  • Note: No testing performed on lever operated pop-up waste,
  • Size: Stainless steel braided PEX lined flexible inlet hose assemblies incorporating ⅜” captive nut end connections.
  • Marking: Hansgrohe on body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    15 070 xxx - Hansgrohe PureVida 110, 15 072 xxx - Hansgrohe PureVida 110, 15 074 xxx - Hansgrohe PureVida 240, 15 075 xxx - Hansgrohe PuraVida & 15 081 xxx - Hansgrohe PuraVida 200 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710116

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a push on/off headwork with rotary temperature control using a dome type operating member. The inlets hoses incorporate stainless steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection . Model 45 010 xxx is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710116
  • Expiry date: 31/10/2022
  • Note: No testing performed on pop-up waste.
  • Size: Stainless steel braided PEX lined hose assembly incorporating ⅜” BSP captive nut end connections.
  • Marking: AXOR on base of tap body
  • Installation Requirements R001 R006 R009
  • Model
    45 010 xxx Axor Puro Select Basin Mixer 110 with pop-up waste, 45 012 xxx Axor Puro Select Basin Mixer 110, 45 013 xxx Axor Puro Select Basin Mixer 200, 45 014 xxx Axor Puro Select Basin Mixer 260 & 45 015 xxx Axor Puro Select Basin Mixer 80 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
  • Manufacturer: Hansgrohe SE
    Company Name
    Hansgrohe SE
    Address
    Auestrasse 5 - 9, 77761 Schiltach
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 2 of 32