Ceramic cartridge headwork with a plastic body and EPDM seals for insertion into specifically dimensioned tap assemblies. Maximum working pressure 16.0 Bar. Maximum operating temperature 80°C

Section:

0440 Headworks

WRAS Approval Number:

1907700

Expiry date:

31/07/2024

Size:

Ø 27mm

Marking:

Hansgrohe on body

Installation Requirements:

R001

Model:

30 614 320 - J27Joystick mixing cartridge.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks with various single lever operating members. The spout outlets incorporate a plastic flow straightener and a stainless steel strainer. The product is supplied with metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

1904703

Expiry date:

30/04/2024

Size:

¾” BSP (M)

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R005 R010

Model:

31 423 xxx - Hansgrohe Metris, 31 427 xxx - Hansgrohe Talis & 31 523 xxx - Hansgrohe Focus. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

‘Hansgrohe Logis’ wall mounted, two-hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Model listed is a spout and finish set, intended for use in conjunction with concealed basic set 13 622 180. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed.

WRAS Approval Number:

1904067

Expiry date:

30/04/2024

Note:

The concealed basic set 13 622 180 is not covered by the scope of this approval.

Size:

½” BSP (M)

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R010 R040

Model:

71 220 xxx - Hansgrohe Logis Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of partially concealed, wall mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The product also incorporates a self-cancelling diverter. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

1904068

Expiry date:

30/04/2024

Size:

½” BSP (F)

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R010 R030 R040 R120

Model:

71 408 xxx Hansgrohe Logics E bath mixer set for concealed installation. 71 246 xxx Hansgrohe MySport Single lever bath mixer for concealed installation. 71 245 xxx MyCube Single lever bath mixer for concealed installation 31 779 xxx Hansgrohe Ecos Bath mixer set for concealed installation Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

‘Axor ShowerSolutions’ wall mounted, thermostatic shower valve with brass body (various finishes), incorporating ‘detent’ (push on, push off) headworks controlling the flow via push button assembly. Temperature is controlled independently via a thermostatic cartridge using a single lever operating member. The inlets incorporate stainless steel strainers and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1904069

Expiry date:

30/04/2024

Size:

½” BSP (M)

Marking:

AXOR on front of valve body.

Installation Requirements:

R001 R010 R040

Model:

45 440 xxx - Axor ShowerSolutions 800 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

‘Hansgrohe Ecostat’ and ‘Versostat’ ranges of wall mounted, thermostatic shower control valves with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks controlling the flow using single lever operating members. Temperature is controlled independently via a thermostatic cartridge, also using various lever operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

1904006

Expiry date:

30/04/2024

Size:

½” BSP (M) x ¾” BSP (M) offset unions.

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R010 R040

Model:

13 113 xxx - Hansgrohe Ecostat, 13 116 xxx - Hansgrohe Ecostat, 13 117 xxx - Hansgrohe Ecostat & 15 368 xxx - Hansgrohe Versostat. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

‘Hansgrohe Raindance’ range of overhead shower outlets with brass bodies (various finishes). The products incorporate a plastic flow regulator. Models listed are to be used in conjunction with the 26 471 180 basic set. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

1904012

Expiry date:

30/04/2024

Note:

Open outlet use only. The 26 471 180 basic set is not approved in its own right.

Size:

½” BSP (M)

Marking:

Hansgrohe on front of shower faceplate.

Installation Requirements:

R001 R009

Model:

Hansgrohe Raindance range: 26 472 xxx & 26 481 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe Wasselonne S.A.S

Company Name

Hansgrohe Wasselonne S.A.S

Address

Parc d'activités les Pins, 67310 Wasselonne

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

1906704

Expiry date:

30/06/2024

Size:

Stainless steel braided PE-X lined flexible hose assemblies incorporating ⅜" captive nut end connections

Marking:

Hansgrohe on front base of body

Installation Requirements:

R001 R006 R009 R010

Model:

14 870 XXX Hansgrohe Talis S² Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Kreuzwegstrasse 41 D-77656 Offenburg

View All Listings by this Company

AXOR Uno Range of single hole, single outlet (fixed) over the rim bidet combination tap assemblies with brass bodies (various finishes). Incorporating ceramic cartridge headworks and various operating members. The spout outlet incorporates a plastic aerator and the product is supplied with a pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole, metal.

WRAS Approval Number:

1905300

Expiry date:

31/05/2024

Size:

Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections.

Marking:

AXOR on operating member

Installation Requirements:

R001 R006 R009 R010

Model:

45 200 xxx (dome type operating member) 38 211 xxx (loop type operating member) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted shower outlet having a riser pipe with diverter having a brass body (various finishes) from overhead to a hand held shower outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

WRAS Approval Number:

1905326

Expiry date:

31/05/2024

Size:

½” BSP (F)

Marking:

Hansgrohe on overhead shower and handset holder.

Installation Requirements:

R001 R040

Model:

27 795 xxx HG Crometta S 240 SHP EcoSm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company