Water Regulations Approval Scheme Ltd

Caleffi S.p.A Approvals

WRAS Approval Number: #2009331

Range of indirect heat interface units providing heating and instantaneous hot water. The hot water and space heating is provided via two separate plate heat exchangers. The space heating circuit incorporates an expansion vessel and expansion relief valve (set @ 3.0 bar). The primary circuit only is supplied with isolation valves on the flow and return. Maximum working pressure primary 16.0 bar. Maximum working pressure space heating 2.5 bar. Maximum working pressure secondary hot water (DHW) 10.0 bar. Maximum operating temperature primary 75°C. Maximum operating temperature space heating 85°C. Maximum operating temperature secondary hot water (DHW) 65°C.

Section:: 1350 Heat Exchangers
WRAS Approval Number:: 2009331
Expiry date:: 30/09/2025
Note:: Not supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.
Size:: Primary: 1” BSP (M). Secondary: ¾” BSP (M). DHW: ½” BSP (M).
Marking:: Caleffi on cover. Pressure, model, temperature and other technical information on inside cover.
Installation Requirements:: R001 R360
Model:: SATK30105 - 75kW - Indirect HIU. SATK30103 - 50kW - Indirect HIU.
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

WRAS Approval Number: #2012308

Filling loop assembly, consisting of a stainless steel braided EPDM lined flexible hose, a lever operated brass spherical valve and a DZR brass double check valve assembly that incorporates a lever operated spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 23°C.

Section:: 1015 Filling Loop
WRAS Approval Number:: 2012308
Expiry date:: 31/12/2025
Size:: 15mm compression
Marking:: Caleffi logo, CR, and flow arrow on mould on double check valve assembly body Caleffi logo mould on isolation valve body
Installation Requirements:: R001
Model:: 300600 300600 CST
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

WRAS Approval Number: #2101310

Range of ‘right hand’ or ‘left hand’ tempering valves having a plastic body incorporating a thermostatic element. The cold inlet incorporates a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:: 2010 Valves
Section Subtitle:: Blending, thermostatic.
WRAS Approval Number:: 2101310
Expiry date:: 31/01/2026
Size:: ½” BSP (M) x 22.30mm OD manifold connection.
Marking:: Caleffi logo on body.
Installation Requirements:: R001
Model:: H0007852 Right Hand Tempering Valve. H0008522 Left Hand Tempering Valve
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

WRAS Approval Number: #2012359

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C. Model added September 2021 (501500) has a maximum operating temperature of 120°C. All other models have a maximum operating temperature of 115°C.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2012359
Expiry date:: 31/12/2025
Size:: See model
Marking:: Caleffi logo on body.
Installation Requirements:: R001 R200
Model:: Serie 502 Robocal: ⅜" BSP (M): 502430. 502430 CON. 502430 CST. 502431 BSC. 502434 CST. 502435 CST. 502533. 502533 FRT. 502533 RIF. 502533 TAK. 502934 CST. 502937 BSC. Art. 502 Robocal with flow valve: ¼" BSP (M): 502420. 502530. ⅜" BSP (M): 502530 TH. 502530 TH1. 502930 TH. Art. 502 Robocal Long: ⅜" BSP (M): 502630. 502630 CST. 502630 WLF. 502631 CST. 502635 CST. 502636 CST. 502638 CST. 502638 OEM. 502730. 502730 A. 502730 BSC. 502730 CST. 502730 GRN. 502730 NTR. 502822. ½" BSP (M): 502640. 502643A. 15mm compression: 502649. Art. 502 Minical ⅜": ⅜" BSP (M): 502030. 502030 CON. 502030 CST. 502031. 502034 CST. 502035 CST. 502036 CST. 502037 CST. 502037 VLL. 502037 WLF. 502038 CST. 502130. 502130 CST. 502130 ENC. 502130 FRT. 502130 GRN. 502130 TAK. 502130 TH. 502130 TH1. 502131. 502131 TH. 502132 DEC. 502133. 502134 DEC. 502135 RIF. 502231. 502231 CST. 502231 TH. 502232 TH. Art. 502 Minical ½" BSP (M): 502020 CST. 502040. 502040 CON. 502040 CST. 502040 MI. 502040A. 502041. 502041 MI. 502043. 502043 CST. 502043 IMM. 502043A. 502043A CST. 502046 IMM. 502140. 502140 ENC. 502140 FRT. 502141. 502142. 502144 ART. 502144 DEC. 502145 RIF. 502241. 502242 TH. 502243A. 502246 IMM. 502343A. ¾" BSP (M): 502050. 502051. 502052 CST. 1" BSP (M): 502060. 502061. Model added September 2021: ¾” BSP (F): 501500.
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company

WRAS Approval Number: #2104302

Range of T-type thermostatic mixing valves with chrome plated DZR brass body, EPDM’O’-rings and NBR/fibre galsets (except for 252100 CST model). Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.

Section:: 2010 Valves
Section Subtitle:: Blending, thermostatic.
WRAS Approval Number:: 2104302
Expiry date:: 30/04/2026
Size:: See model
Marking:: Caleffi and technical information printed on operating cap. Caleffi, CR and Caleffi Solar on body.
Installation Requirements:: R001 R010 R040 R120
Model:: 252140: ½” BSP(M) 252150: ¾” BSP (M) 252154 BSC: ¾” BSP (M) 252100 CST: 1” BSP (M) without tail pieces.
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
PLANT 2. S.R. 229 28010 Fontaneto d'Agogna (NO)
Phone
+39 0322 8491

View All Listings by this Company