Range of plastic solenoid valves with an EPDM diaphragm and ‘O’-rings. The inlets incorporate a stainless-steel strainer (except for push fit inlet models). Push fit connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C. BS6920 70°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

2311340

Size:

see model

Marking:

A. u. K. Müller GmbH & Co. KG logo and flow arrow on body. AuK Muller, model number, date of manufacture (MM/YY) and other technical informatrion on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

51.005.125.xxx. Where xxx denotes inlet and outlet, and is replaced with: 001 = Inlet: Plug Ø 14,8mm and clamp x Outlet: Nozzle Ø 8,4mm with 1 ‘O’-ring. 002 = Inlet: Flange 11.07mm x Outlet: 6mm push fit. 003 = Inlet: Flange 11.07mm x Outlet: 8mm push fit. 004 = Inlet and outlet: 8mm push fit. 005 = Inlet and outlet: 6mm push fit. 006 = Inlet: Plug Ø 14,8mm and clamp/Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 008 = Inlet: Flange 11.07mm x Outlet: Nozzle Ø 8,4mm with 1 ‘O’-ring. 011 = Inlet: Plug Ø 14,8mm and clamp x Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 012 = Inlet: Flange 11.07mm x Outlet: Nozzle Ø 8,4mm with 2 ‘O’-rings. 022 = Inlet: Plug Ø 14,8mm and clamp x Outlet: 8mm push fit.

Product Images

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Solenoid valve with a plastic body, EPDM diaphragm and ‘O’-rings. Maximum working pressure 8.0 bar. Can only be used with water at 70°C. BS6920 70°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

2311363

Size:

31 mm diameter (Push-in connector).

Marking:

A.u.K. Müller, model, voltage, power, orifice size, pressure rating article number, WRAS Approved Product logo and date of manufacture WW/YY on adhesive label on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2028

Model:

50.007.800.

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of monostable/normally closed pilot operated solenoid valves mounted in plastic bodies. Valve bodies can also be mounted together in multiples. Push-fit connections to be used with PTFE tube. Maximum working pressure 10 bar. Maximum operating temperature 70°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

241004727

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

4mm or 6mm Pushfit.

Marking:

A. u. K. Müller GmbH & Co. KG and logo, type, 6V, DN and pressure rating on adhesive label on body. A. u. K. Müller GmbH & Co. KG logo, CE and date clock month & year moulded on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2029

Model:

19.Y1Y2.Z1Z2Z3 - Miniature valve Y1 = Function (1 = Distribution / 2 = Collection) Y2 = Pilot valve orifice size in mm (0,5- 1,2) Z1 = number of connected housing units Z2 = inlet connection; 1 = Nozzle (tube) / 2 = nozzle (push-fit) / 3 = Push-Fit (4mm) / 4 = Push-Fit (6mm) / 9 = Combination of multiple housings with Inlet 1-4 Z3 = outlet type; 1 = Nozzle (tube) / 2 = nozzle (push-fit) / 3 = Push-Fit (4mm) / 4 = Push-Fit (6mm) / 9 = Combination of multiple housings with Inlet 1-4

Product Images

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

View All Listings by this Company

Range of pumps with plastic bodies. Maximum working pressures: 41.007.400 model: 0.28 bar, 41.008.400 model: 0.38 bar. Maximum operating temperature 96°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250104703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

41.007.400: Ø12mm inlet/Ø9mm outlet. 41.008.400: Ø12mm inlet/Ø10mm outlet.

Marking:

A.u.K. Müller, model type, production date (WW/YY) and technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

41.007.400, 41.008.400.

Product Images

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250404711

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Product Images

Approval Holder:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company

Manufacturer:

A.u.K. Müller GmbH & Co. KG

Company Name

A.u.K. Müller GmbH & Co. KG

Address

Dresdener Str. 162, D-40595 Düsseldorf

Phone

+49 211 7391 0

General Email

info@akmueller.de

View All Listings by this Company