Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating single sequential headworks controlling both flow and temperature with a single lever type operating member. Model A6697AA is supplied with a combined strainer, servicing valve that incorporates a single approved check valve cartridge verified by test, suitable for backflow protection to fluid category 2. Maximum working pressure; 10 Bar. Maximum operating temperature 65°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

240602054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

30/06/2029

Note:

A6791NU is the deck mounted fixing kit for A6696AA

Size:

10mm Copper Tails with a 10mm compression x ½” BSP (F) adaptor for connection to a ½” BSP (M) x 15mm compression strainer/isolation valve (A6697AA) 10mm Copper Tails with a 10mm x 15mm compression adaptor (A6696AA)

Marking:

Armitage shanks logo on operating member

Installation Requirements:

R001 R006 R010

Model:

A6697AA A6696AA A6791NU

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Range of anti-vandal shower outlets, (brass bodies – chrome plated finish), incorporating a flow regulator on the inlet. Open outlet use only Maximum operating temperature 65.0°C

Section:

1650 Shower Outlets

WRAS Approval Number:

240702002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/07/2029

Size:

A4672AA – 15mm OD A5451AA – 15mm OD A5452AA – ½” BSP (M)

Marking:

ISI on front of body

Installation Requirements:

R001 R040

Model:

A4672AA A5451AA A5452AA

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Range of wall mounted, thermostatic shower valves (chromium plated brass) incorporating a single sequential headwork controlling both flow and temperature with a single lever operating member. The inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection The product is supplied with an isolation valve for each inlet. Maximum working pressure; 10 Bar Maximum operating temperature 85°C

Section:

2010 Shower Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

240702040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/07/2029

Size:

1/2" BSP (M)

Marking:

Armitage Shanks on body.

Installation Requirements:

R001 R010 R040

Model:

A4130AA - Contour 21

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Self-closing pillar tap (chromium plated brass) with spring loaded headwork and dome operating member. The spout outlet incorporates a plastic aerator. Supplied with brass backnuts. Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:

1820 Taps

Section Subtitle:

Self closing.

WRAS Approval Number:

240702054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

31/07/2029

Size:

½” BSP (M)

Marking:

Armitage shanks on operating member.

Installation Requirements:

R001 R005

Model:

B8267AA – Avon 21

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

Self-closing, wall mounted bib tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic aerator with integral flow regulator or optional flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing.

WRAS Approval Number:

240902016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Expiry date:

30/09/2029

Size:

½” BSP M

Marking:

Armitage Shanks on operating member

Installation Requirements:

R001 R040

Model:

S7241AA Avon 21

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company