Section Code 5120 : Components.
Back To Directory Sections'HYUNDAI White Grey 1901 Tank Panel'. Light grey coloured, hot-press moulded GRP tank panel. For use with water up to 50°C.
'Hansung GRP Water Tank Panel'. Off-white coloured (opaque), hot press moulded GRP panel. For use with water up to 55°C.
'Ekomaxi Tank Panel'. Off-white coloured, compression moulded GRP panel. For use with water up to 50°C.
'Fibre Gulf GRP Pipe'. Light green/off-white coloured GRP pipe manufactured by filament winding. For use with water up to 50°C.
'FiberTie Pipe Factory and Accessories W.L.L.GRE composite pipe'. GRE pipe which consists of a beige/yellow coloured inner layer and pale green coloured outer layer, manufactured by helical winding. For use with water up to 50°C.
'Pipeco GRP Panel'. Grey coloured, compression moulded (hot pressed) GRP panel. For use with water up to 23°C.
'ZISIF GRP water tank panel'. Off-white coloured, GRP panel manufactured by hot press moulding. For use with water up to 55°C.
'GRE-FPI Qatar Wavistrong GRE'. Dark yellow coloured GRE pipe manufactured by filament winding. For use with water up to 85°C.
'GRP-FPI Qatar Fiberstrong GRP'. Green coloured GRP pipe manufactured by filament winding. For use with water up to 50°C.
'GRP 80 PIpe'. GRP pipe manufactured by continuous winding comprising of a light brown coloured inner layer and pale yellow coloured outer layer. For use with water up to 50°C.
'PV7'. Green coloured, GRP pressure vessel body manufactured by filament winding. For use with water up to 45°C.
'SEJIN SJ-0211WT GRP Panel'. Off-white coloured, compression moulded GRP panel. For use with water up to 50°C.
'GRE-FPI (E) Wavistrong'. Yellow/beige coloured GRP pipe manufactured by helical filament winding. For use with water up to 85°C.
'GRE-FPI-KSA-Wavistrong'. Yellow coloured GRE pipe manufactured by helical winding. For use with water up to 65°C.
'MT SMC Water Tank Panel'. White coloured, hot press moulded fibreglass water tank panel. For use with water up to 23°C.
'DOHA Tank Panel'. Cream coloured, hot-press moulded SMC panel. For use with water up to 55°C.
'Multank Tank Panel'. Cream coloured, hot-press moulded SMC panel. For use with water up to 55°C.
'Orange Tank Panel'. Cream coloured, hot-press moulded SMC panel. For use with water up to 55°C.
'HL-GRP Water Tank Panel'. Off-white coloured, hot press moulded GRP panel. For use with water up to 23°C.
'BK GRP Tank Panel'. Beige coloured, compression moulded GRP panel. For use with water up to 50°C.
'Pipeco GRP Panel (HT)'. Grey coloured, compression moulded GRP panel. For use with water up to 55°C.
'IPLLC-GRE-H2O'. Green (opaque) coloured, GRE pipe manufactured by filament winding. For use with water up to 85°C.
'IPF-GRE-H2O'. Green (opaque) coloured, GRE pipe manufactured by filament winding. For use with water up to 85°C.
'Raytop 001-GRP Water Tank Panel'. Off-white coloured, hot press moulded GRP panel. For use with water up to 23°C.
'FTC GRP Panel'. Grey (opaque) coloured, compression moulded GRP panel. For use with water up to 50°C.
'Extrastrong Ivory Coloured (RAL 1015) Tank Panel'. Cream coloured, hot press moulded GRP panel. For use with water up to 50°C.
'GRP-FPI-KSA Fiberstrong'. Pale green coloured (opaque) GRP pipe manufactured by filament winding. Between September 2020 and April 2024 the pipe was for use with water up to 50°C. From May 2024, the pipe is for use with water up to 60°C.
GRE-FPI-WAVISTRONG® H20. Light brown coloured (opaque), GRE pipe manufactured by filament winding. For use with water up to 70°C.
'MNT GRP Panel'. Beige coloured, compression moulded GRP panel. For use with water up to 23°C.
'Amiantit Qatar GRP FG'. Pale green coloured GRP pipe manufactured by filament winding. For use with water up to 23°C.
'GRE-PT-FPI-WAVISTRONG'. Beige coloured GRE pipe manufactured by filament winding. For use with water up to 85°C.
'Fiberr Fiber Reinforced Resins GRP Modular Water Storage Tank Panel'. Off-white coloured GRP panel manufactured by SMC composite hot-pressing. For use with water up to 23°C.
'S-006'. Cream coloured, compression moulded GRP panel. For use with water up to 23°C.
'S-002'. Cream coloured, compression moulded GRP panel. For use with water up to 23°C.
'DPFC GRE Pipe'. Yellow-brown coloured GRE pipe manufactured by winding. For use with water up to 70°C.
'Korvan GRP Panel'. Cream coloured GRP panel manufactured by hot press moulding. For use with water up to 45°C.
'AFIL BLUE Tank Panel'. Beige coloured GRP tank panel manufactured by continuous winding. For use with water up to 50°C.
'AFIL BLUE Pipe'. Beige coloured GRP pipe manufactured by continuous winding. For use with water up to 50°C.
'Pipeco GRP Panel (HT2)'. Grey coloured, hot-pressed compression moulded GRP panel. For use with water up to 85°C.
'Solico Ivory GRP Panel'. Beige coloured, compression moulded GRP panel. For use with water up to 60°C.
'GRAD-GRP Water Tank Panel'. Cream coloured (opaque), compression moulded GRP panel. For use with water up to 23°C.
'Extralite Pipe'. Light green/brown coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.
'Extralite Fitting'. Brown coloured GRP fitting manufactured by hand lay-up. For use with water up to 60°C.
'ajpipe GRP Pipe'. Beige coloured GRP pipe manufactured by continuous filament winding. For use with water up to 23°C. From February 2024, the pipe is for use with water up to 60°C.
'Saphir DIMATIT Pipe'. Pale green coloured GRP pipe manufactured by continuous filament winding and manual lamination. For use with water up to 23°C.
'SNB GRP Panel'. Beige coloured, hot press moulded GRP panel. For use with water up to 50°C.
'S-006TG'. Cream coloured, compression moulded GRP panel. For use with water up to 23°C.
'IPF-GRP-H2O'. Off-white/beige coloured GRP/GRV pipe manufactured by filament winding. For use with water up to 60°C.
'IPF-GRP-H2O'. Off-white/beige coloured GRP/GRV pipe manufactured by filament winding. For use with water up to 60°C.
'DAEWOO GRP Panel'. Beige coloured, hot press moulded GRP panel. For use with water up to 50°C.
`DR-PNL-WT Tank Panel`. Grey coloured GRP panel manufactured by hydraulic press moulding. For use with water up to 50°C.
'SARNIC GRP Tank Panel'. Off-white coloured, compression moulded GRP panel. For use with water up to 35°C.
`HYUNDAE Tank Panel`. Grey coloured GRP panel manufactured by hydraulic press moulding. For use with water up to 50°C.
'Sungyoung GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.
'Norsodyne H 13212 TAE Laminate' for use with 'Polycor White Gel Coat'. The glass fibre panel is manufactured by hand lay method and then factory applied, unsaturated resin gel coat is applied by brush (BR) or spray (PA). The brush gel coat is to be applied as per manufacturer's TDS ‘4100’ dated 10.10.17 and cured for 24 hours@25°C. The spray gel coat is to be applied as per manufacturer's TDS ‘4200’ dated 10.10.17 and cured for 24 hours@25°C. For use with water up to 23°C. These materials are only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
'Extrastrong SMC/ESF-30-10' pipe. Natural (appears pale green coloured) GRE pipe manufactured by filament winding. For use with water up to 70°C.
'Crystic LS96PA Clear Gel Coat' for use with 'Crystic 2-446 PA GRP resin'. Contact moulded GRP resin, manufactured by hand lamination, for use with off-white coloured, factory applied gel coat. Apply as per manufacturer's quick guide 'issue number 1', dated 04/06/2018. Cure for 24 hours@23°C and then 3 hours@80°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Potaglas GRP Sectional Water Tank Panel'. Grey coloured, compression moulded GRP panel. For use with water up to 85°C.
'Sung Il & GRP ENM Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.
'Pipeco Korea Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.
'Chemglass GRP Ladder'. Grey coloured GRP ladder manufactured by pultrusion. For use with water up to 23°C. In February 2023 'Chemglass Grey GRP X profile' was added to the approval. Grey coloured, 'X Profile' manufactured by pultrusion. For use with water up to 23°C.
'Samsung Tank Panel'. Beige coloured, compression moulded GRP tank panel. For use with water up to 23°C.
'Sangwon GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.
'Myungjin GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.
'FINETANK GRP Panel'. Grey coloured, hot press moulded GRP panel. For use with water up to 55°C.
'Devi Flosto GRP (SMC) Hot Press Moulded Tank Panels' (manufactured from SMC 523/35). Grey coloured, hot press moulded GRP panels with a thickness of between 3.0mm & 16.0mm. For use with water up to 23°C.
'Chemglass GRP Grating (Green)'. Green coloured, GRP grating manufactured by woven open-moulding. For use with water up to 23°C.
'Wavistrong EWT Series Pipe'. Yellow/beige coloured, glass fibre reinforced epoxy pipe manufactured using filament (helical) winding. For use with water up to 85°C.
'ELEC GRP Pipe A'. Brown coloured GRP pipe manufactured by filament winding. For use with water up to 23°C.
'CK GRP Water Tank Panel'. Light grey coloured, hot pressed GRP panel. For use with water up to 50°C.
'Anchor-Link'. Grey coloured, compression moulded GRP panel. For use with water up to 50°C.
‘ECOCLEAR White Gray 9098’. Off-white/grey coloured, hot pressed GRP single layered panel. For use with water up to 55°C.
'GRE-GEI-Wavistrong-H2O'. Light brown coloured GRE pipe manufactured by filament winding. For use with water up to 75°C.
'SOVISY GRP Panel for Water Storage Tank'. Grey coloured, compression moulded GRP panel. For use with water up to 23°C.
‘MJ Tank & GRP ENM Tank Panel’. Grey (beige) coloured, compression moulded GRP panel. For use with water up to 55°C.
'K-Tank GRP Water Tank Panel'. Off-white coloured (opaque), hot press moulded GRP panel. For use with water up to 55°C.
'NIGBOR'. Beige coloured GRP pipe manufactured by filament winding. For use with water up to 23°C.
'Aquastore'. Grey coloured, GRP panels manufactured by hydraulic press. For use with water up to 60°C.
'Aquasystem'. Grey coloured, GRP panels manufactured by hydraulic press. For use with water up to 60°C.
'Aquatank'. Grey coloured, GRP panels manufactured by hydraulic press. For use with water up to 60°C.
'CAPSTON_WG'. Beige coloured, hot press moulded, GRP panel. For use with water up to 55°C.
'CPP-GRE12' & 'CPP-GRE951' Pipes. Yellow/green (translucent) coloured GRE pipes manufactured using a two-step process which involves hand lay-up and then filament winding. For use with water up to 70°C.
'Sunnik SMC Grey Panel. Grey coloured, hot press moulded GRP panel. For use with water up to 50°C.
‘STALWART White Gray 9098’. Off-white/grey coloured, hot pressed GRP single layered panel. For use with water up to 55°C.
'Wavistrong H2O'. Yellow coloured GRE pipe manufactured by continuous filament binding. For use with water up to 75°C.
'DPFC GRP Pipe'. Beige/straw coloured GRP pipe manufactured by filament winding. For use with water up to 50°C.
‘Berrak Mekanik GRP Panel’. Grey coloured (opaque) GRP panel manufactured by compression moulding. For use with water up to 23°C.
'ELEC GRP PIPE B'. Yellow coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.
'SHUANGSHI GRP PIPE 51160'. Yellow coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.
'GRE-2-FPI-WAVISTRONG®'. Green/brown coloured, glass reinforced epoxy pipe manufactured by filament winding. For use with water up to 85°C.
'SRC GRP Pipe'. Beige coloured (translucent), SRC GRP pipe manufactured by dual helical filament winding. For use with water up to 70°C.
'SRC GRV Pipe'. Beige coloured (translucent), SRC GRV pipe manufactured by dual helical filament winding. For use with water up to 70°C.
'SRC GRE Pipe'. Yellow coloured (opaque), SRC GRE pipe manufactured by dual helical filament winding. For use with water up to 70°C.
'Extrabrite'. Light brown coloured GRE pipe manufactured by filament winding (at Extra Co Fibre Glass & Prefab Houses LLC – Sharjah, UAE and Extra Co Industries LLC – Ras Al Khaimah, UAE). For use with water up to 60°C.
'Extrabrite'. Light brown coloured GRE fittings manufactured by filament winding (at Extra Co Fibre Glass & Prefab Houses LLC – Sharjah, UAE) or hand lay-up (at Extra Co Industries LLC – Ras Al Khaimah, UAE). For use with water up to 60°C.
'Al Muftah Sectional Tank Panel'. Light grey coloured, hot press moulded GRP panel. For use with water up to 23°C. From April 2024 the panel is for use with water up to 50°C.
‘BK-GRP Watertank’ panel. Off-white coloured GRP panel manufactured by pressurised moulding. For use with water up to 23°C.
'PAN GRP Water Tank Panel'. Off-white coloured, hot press moulded GRP panel. For use with water up to 23°C.
'GRP-FPI-FIBERSTRONG'. Light green coloured, multi-layered GRP/GRV pipe manufactured by filament winding. For use with water up to 60°C.
'GRE-FPI-KSA-WAVISTRONG Pipe'. Light brown coloured (opaque), GRE pipe manufactured by helical winding. For use with water up to 85°C.
'P0667 Lid Support'. Light green coloured (opaque), GRP lid support component manufactured by pulltrusion. For use with water up to 23°C.
'Fibromesh GFRP Water Tank Panel'. White coloured (opaque), compression moulded FRP panel. For use with water up to 23°C.
'GRE-FPI-WAVISTRONG'. Beige coloured GRE pipe manufactured by filament winding. For use with water up to 85°C.
'Aksu Modular su depolama ltd şti GRP Modular Water Storage Tank Panel'. Off-white, hot pressed moulded, GRP panel. For use with water up to 23°C.
'SS GRP Tank Panel'. Cream coloured, hot-press moulded SMC panel. For use with water up to 55°C.
'Fibre Gulf'. GRP pipe which is has a brown/yellow coloured water contact layer and a beige coloured outer layer, manufactured by filament winding and contact moulding. For use with water up to 60°C.
'SMC GRP Tank Panel'. Off-white coloured, hot press moulded GRP panel. For use with water up to 23°C.
'Tecnoplast GRVE pipe'. Translucent, light green coloured, GRP pipe manufactured by hand lay-up. For use with water up to 23°C.
'SUS-GRP01'. White coloured GRP panel manufactured by hot press moulding. For use with water up to 65°C.
‘GRE-FPI-Wavistrong®’. Light brown GRE pipe manufactured by filament winding. For use with water up to 85°C.
'KS'. Grey coloured, hot press moulded GRP panel. For use with water up to 50°C.
''GRP-FPI (E) Fiberstrong Pipe'. Beige coloured GRP pipe manufactured by filament winding. For use with water up to 60°C.
Page of 1
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
