Water Regulations Approval Scheme Ltd

Disinfection Equipment

Section Code 2411 : Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed.

Back To Directory Sections

WRAS Approval Number: #1905703

Range of UV disinfection units with stainless steel bodies, PTFE plates and quartz sleeves. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1905703
Expiry date:: 31/05/2024
Size:: See model
Marking:: Threaded models: Model number, Van Remmen UV Technology and address on label on body. Flanged models: Model number, UV-C Disinfection System, serial number, Van Remmen UV Technology and address on label on body.
Installation Requirements:: R001 R150 R170
Model:: Threaded models: V100, V110, V120: 1” BSP (Male) V130, V140: 1 ½” BSP (Male) V150, V160, V170: 2” BSP (Male) V180: 2 ½” BSP (Male) V190: 3” BSP (Male) Flanged models: V200, V210, V220: DN100 flanged connection D100, D150: DN150 flanged connection
Factor:: Wycombe Water Ltd.

Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446
General Email
sales@uvo3.co.uk

View All Listings by this Company
Manufacturer:: Van Remmen Techniek BV

Company Name
Van Remmen Techniek BV
Address
Hooglandweg 3 8131 TE Wijhe
Country
Netherlands
General Email

View All Listings by this Company

WRAS Approval Number: #1905346

Range of UV disinfection units with stainless steel bodies and quartz tube. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1905346
Expiry date:: 31/05/2024
Marking:: Daro on control box.
Installation Requirements:: R001 R150 R170
Model:: ECO1 & ECO2: ¾” BSP (M). ECO3 & ECO5 1” BSP (M).
Manufacturer:: Daro UV Systems Ltd

Company Name
Daro UV Systems Ltd
Address
Unit 9 Ballingdon Hill Industrial Estate, Sudbury, Suffolk
Postcode
CO10 2DX
Phone
01787370187

View All Listings by this Company

WRAS Approval Number: #1905378

Range of UV disinfection units incorporating stainless steel bodies & sensors. The products also incorporate a quartz tube and probe. Maximum operating pressure 10.0 bar. Maximum operating temperature 40°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1905378
Expiry date:: 31/05/2024
Size:: ¾ & 2 (BSP) M. 1/8” BSP (F). DN80, DN100 & DN250.
Marking:: SITA, SITA logo & model on control panel.
Installation Requirements:: R001 R150 R170
Model:: UV 107 UV 403 UV 405 AL UV 405 AL2 UV 405C AL UV 405C AL2 UV 412 AL UV 412 AL2 UV 440 AL UV 440 AL2 LCD Series UV 405 LCD UV 405 LCD PLUS UV 412 LCD UV 412 LCD PLUS UV 440 LCD UV 440 LCD PLUS UV 450 LCD UV 480 LCD UV 480 LCD PLUS UV 550 LCD UV 550 LCD PLUS UV 80/2 LCD UV 80/2 LCD PLUS 80 Rack LCD Series UV 80/3 RACK LCD UV 80/3 RACK PLUS LCD UV 80/4 RACK LCD UV 80/4 RACK PLUS LCD UV 80/5 RACK LCD UV 80/5 RACK PLUS LCD AM Series UV AM 24 UV AM 24 PLUS UV AM 50 UV AM 50 PLUS UV AM 60 UV AM 60 PLUS UV AM 96 PLUS UV AM 125 PLUS UV AM 160 PLUS 400 Series UV 400/1 TC PLUS UV 400/2 TC PLUS UV 400/3 TC PLUS UV 400/4 TC PLUS UV 400/5 TC PLUS UV 400/6 TC PLUS UV 400/8 TC PLUS O_NORM Series UV 4 IT UV 10 IT UV 40 IT UV 80 IT
Manufacturer:: S.I.T.A. Srl.

Company Name
S.I.T.A. Srl.
Address
Via Rivarolo 61, 16161 Genova, Italy

View All Listings by this Company

WRAS Approval Number: #1905705

Range of UV disinfection units with stainless steel bodies, PTFE plates and quartz sleeves. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1905705
Expiry date:: 31/05/2024
Size:: See model
Marking:: GOODWATER, MODEL, TUCANA, DATE DD/MM/YY, UV DISINFECTION UNIT & EMAIL ADDRESS ON ADHESIVE LABEL ON BODY
Installation Requirements:: R001 R150 R170
Model:: Threaded models: VSL-1, VSL-2, VSL-3: 1” BSP (Male) VSL-4, VSL-5: 1 ½” BSP (Male) VSL-6, VSL-7, VSL-8 2” BSP (Male) VSL-9: 2 ½” BSP (Male) VSL-10: 3” BSP (Male) Flanged models: VML-100, VML-200: DN100 flanged connection D100, D150: DN150 flanged connection
Factor:: Goodwater Ltd.

Company Name
Goodwater Ltd.
Address
24 Ivanhoe Road, Hogwood Lane Industrial Estate, Wokingham
Postcode
RG40 2NP
Phone
+44 118 973 5003
General Email
info@goodwater.co.uk

View All Listings by this Company

WRAS Approval Number: #1905392

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1905392
Expiry date:: 31/05/2024
Size:: ¾ & 2 (BSP) M. 1/8” BSP (F). DN80, DN100 & DN250.
Marking:: ESCO ON ADHESIVE LABEL ON POWER SUPPLY ON SMALLEST MODEL ONLY. ESCO ON UV CHAMBER & CONTROL PANEL ALL OTHER MODELS
Installation Requirements:: R001 R150 R170
Model:: ECO-05, ECO-10, ECO-20AL, ECO-20AL2, ECO-20CAL, ECO-20CAL2, ECO-45AL, ECO-45AL2, ECO-60AL, ECO-60AL2, ECO-20LCD, ECO-20LCD-P, ECO-45LCD, ECO-45LCD-P, ECO-60LCD, ECO-60LCD-P, ECO-75LCD, ECO-85LCD, ECO-85LCD-P, ECO-100LCD, ECO-100LCD-P, EC1-12LCD, EC1-12LCD-P, EC1-20R, EC1-20R-LCD-P, EC1-30R-LCD, EC1-30R-LCD-P, EC1-40R-LCD, EC1-40R-LCD-P, AML24R-LCD, AML24R-LCD-P, AML50R-LCD, AML50R-LCD-P, AML60R-LCD, AML60R-LCD-P, AML96-TS, AML96-TS-P, AML125-TS, AML125-TS-P, AML160-TS, AML160-TS-P, EC400-1TS, EC400-2TS, EC400-3TS, EC400-4TS, EC400-5TS, EC400-6TS, EC400-8TS, UV4IT, UV10IT, UV40IT & UV80IT
Factor:: Esco International

Company Name
Esco International
Address
Unit 8 Cae Ffwt Business Park Pendraw'r Llan Road Glan Conwy
Country
LL28 5SP

View All Listings by this Company

WRAS Approval Number: #1906316

Range of UV disinfection units with 316L stainless steel bodies, PTFE plates and quartz sleeves. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1906316
Expiry date:: 30/06/2024
Size:: 1”, 1½”, 2”, 2½” BSP (M)
Marking:: Bio-UV logo(‘Bio-UV’), model, date of manufacture DD/MM/YYYY, technical information on adhesive label on electrical cabinet
Installation Requirements:: R001 R150 R170
Model:: UV Reactors ‘IBP+’ range consisting of models: IBP 10 HO +, IBP 30 HO +, IBP 40 HO +, IBP 2150 HO +, IBP 3150 HO +, IBP 4205 HO +, IBP 5205 HO +, IBP 5 AM +, IBP 10 AM +, IBP 30 AM +, IBP 2150 AM +, IBP 3150 AM +, IBP 10 HO + WITH UV SENSOR, IBP 30 HO + WITH UV SENSOR, IBP 40 HO + WITH UV SENSOR, IBP 2150 HO + WITH UV SENSOR, IBP 3150 HO + WITH UV SENSOR, IBP 4205 HO + WITH UV SENSOR, IBP 5205 HO + WITH UV SENSOR, IBP 5 AM + WITH UV SENSOR, IBP 10 AM + WITH UV SENSOR, IBP 30 AM + WITH UV SENSOR, IBP 2150 AM + WITH UV SENSOR, IBP 3150 AM + WITH UV SENSOR.
Manufacturer:: Bio-UV group

Company Name
Bio-UV group
Address

View All Listings by this Company

WRAS Approval Number: #1910327

UV disinfection unit with stainless steel bodies, EPDM ‘O’-rings and quartz sleeves. Maximum working pressure 3.0 bar. Maximum operating temperature 35°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1910327
Expiry date:: 31/10/2024
Size:: ¼” BSP (F)
Marking:: Bio UV and other techcnial information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170
Model:: TAP UV
Manufacturer:: Bio-UV group

Company Name
Bio-UV group
Address

View All Listings by this Company

WRAS Approval Number: #1910036

Range of ultra violet disinfection units consisting of a stainless-steel body and quartz sleeve. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1910036
Expiry date:: 31/10/2024
Size:: Aquada 1: ½" BSP (M) Aquada 2 & 4: ¾” BSP (M) Aquada 7: 1" BSP (M)
Marking:: Model number, date of manufacture (YYYY), max pressure and other product info on label on body. Model number, date of manufacture (YYYY) and other product info on label on control panel. Wedeco (Xylem brand) on all models
Installation Requirements:: R001 R120 R150 R170
Model:: Wedeco (Xylem brand) Aquada Range of UV disinfection units: AQUADA 1 Altima, AQUADA 1 Promixa, AQUADA 1 Maxima, AQUADA 2 Altima, AQUADA 2 Promixa, AQUADA 2 Maxima, AQUADA 4 Altima, AQUADA 4 Promixa, AQUADA 4 Maxima, AQUADA 7 Altima, AQUADA 7 Promixa, AQUADA 7 Maxima.
Factor:: Xylem Water Solutions UK Ltd

Company Name
Xylem Water Solutions UK Ltd
Address
Private Road 1 Colwick Industrial Estate Colwick
Postcode
NG4 2AN
Country
Nottingham

View All Listings by this Company

WRAS Approval Number: #1912333

Ultra violet disinfection unit consisting of a stainless steel body and quartz sleeve. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1912333
Expiry date:: 31/12/2024
Size:: 9.5mm spigot
Marking:: Daro on body
Installation Requirements:: R001 R150 R170
Model:: EC08W
Manufacturer:: Daro UV Systems Ltd

Company Name
Daro UV Systems Ltd
Address
Unit 9 Ballingdon Hill Industrial Estate, Sudbury, Suffolk
Postcode
CO10 2DX
Phone
01787370187

View All Listings by this Company

WRAS Approval Number: #1912047

Range of ultra violet disinfection units consisting of a stainless-steel body and quartz sleeve. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1912047
Expiry date:: 31/12/2024
Size:: see mdoel
Marking:: Logo belonging to ‘Atlas UV’, model, date of manufacture (YY/MM) on adhesive label on body.
Installation Requirements:: R001 R150 R170 R120
Model:: L8 & L12 (½" NPT). L22, L41 & H38 (¾" NPT). L57, H53, H95 & L79 (1" NPT). H151 (1½" NPT connections).
Factor:: Wycombe Water Ltd.

Company Name
Wycombe Water Ltd.
Address
6 Premus Coldharbour Way, Aylesbury HP19 8AP Aylesbury Bucks
Postcode
HP19 8AP
Country
United Kingdom
Phone
01480355446
General Email
sales@uvo3.co.uk

View All Listings by this Company

WRAS Approval Number: #2005308

UV Home’ range of UV disinfection units with 304L or 316L stainless steel bodies (see model) and EPDM ‘O’-rings. Maximum working pressure 6.0 bar or 10.0 bar (see model). Maximum operating temperature 35°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2005308
Expiry date:: 31/05/2025
Size:: See model
Marking:: Bio UV, Ultra Violet Solutions on panel and body. Model, pressure, date of manufacture (DD-MM-YY) and other technical information on panel.
Installation Requirements:: R001 R120 R150 R170
Model:: 304L Stainless steel - 6.0 bar models: UV Home 2: ¾” BSP (M), UV Home 3: ¾” BSP (M). 316L Stainless steel - 10.0 bar models: UV Home 4: 1” BSP (M), UV Home 6: 1 ½” BSP (M), UV Home 9: 1 ½” BSP (M).
Manufacturer:: Bio-UV group

Company Name
Bio-UV group
Address

View All Listings by this Company

WRAS Approval Number: #1912067

Range of ultra violet disinfection units consisting of a stainless-steel body and quartz sleeve. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 1912067
Expiry date:: 31/12/2024
Size:: see mdoel
Marking:: Luminor, WRAS, model, date of manufacture (YY/MM) on adhesive label on body. Luminor Blackcomb on body
Installation Requirements:: R001 R150 R170 R120
Model:: LB4/5/6-021 & LB4/5/6-031 (½" NPT). LB4/5/6-061, LB4/5/6-101 & LBH4/5/6-101 (¾" NPT). LB4/5/6-151, LBH4/5/6-151, LBH4/5/6-251 & LB4/5/6-201 (1" NPT). LB54/5/6-401 (1½" NPT connections).
Factor:: Luminor Environmental Inc.

Company Name
Luminor Environmental Inc.
Address
80 Southgate Drive, Unit 4, Guelph, ON Guelph
Postcode
N1G 4P5
Country
Canada,

View All Listings by this Company

WRAS Approval Number: #2009044

Range of ultraviolet disinfection units incorporating isolation valves and draw off tapes. Maximum working pressure 16.0 bar. Maximum operating temperature 50ºC.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2009044
Expiry date:: 30/09/2025
Size:: See model
Marking:: HYDROTEC, model, serial number, date of manufacture (YYYY), DN, max pressure and other product info on label on body.
Installation Requirements:: R001 R120 R150 R170 R290
Model:: HydroWELL Select 20: DN 100 HydroWELL Select 30: DN 100 HydroWELL Select 50: DN 150
Factor:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

WRAS Approval Number: #2009047

Range of ultraviolet disinfection units with stainless steel bodies, quartz sleeves and silicone seals. Maximum working pressure 6.8 bar. Maximum operating temperature 40°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2009047
Expiry date:: 30/09/2025
Size:: ¼” BSP (M) inlet/outlet – 2” BSP (M) inlet/outlet
Marking:: Spectrum, Sabre, model, product information on label on body.
Installation Requirements:: R001 R120 R150 R170 R290
Model:: SABRE SUV-S-4-1/4 SABRE SUV-S-8-1/2 SABRE SUV-30-3/4 SABRE SUV-57-1 SABRE SUV-132-2 SABRE SUV-250-2
Factor:: Spectrum

Company Name
Spectrum
Address
20/20 Business Park, Maidstone, Kent
Postcode
ME16 0LS

View All Listings by this Company

WRAS Approval Number: #2010070

Range of ultra-violet disinfection units consisting of a stainless-steel body and quartz tubes with EPDM O rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50.0°C

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2010070
Expiry date:: 31/10/2025
Size:: DN 80 – DN 125
Marking:: Hydeotec, model, pressure, product info on label on body.
Installation Requirements:: R001 R150 R170 R511
Model:: HydroWELL Standard B20i, B20: DN 80 HydroWELL Standard B50i, B50, B30i & B30: DN100 HydroWELL Standard B90i, B90, B70i & B70: DN125
Factor:: Hydrotec International Water Treatment Limited

Company Name
Hydrotec International Water Treatment Limited
Address
38 Main Street Swords Country Dublin
Country
Ireland

View All Listings by this Company

WRAS Approval Number: #2109335

Range of UV disinfection units with stainless steel and EPDM seals. The UV lamps are housed inside synthetic quartz tubes Maximum working pressure 6.9 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2109335
Expiry date:: 30/09/2026
Size:: see model
Marking:: Acuva logo, Acuva Technologies Inc. model, date of manufacture (YYWW) and technical info on body.
Installation Requirements:: R001 R120 R150 R170 R290
Model:: Strike I: 3/8” pushfit inlet x ¼” pushfit outlet. Strike II: ¼” pushfit inlet & outlet.
Manufacturer:: Acuva Technologies Inc.

Company Name
Acuva Technologies Inc.
Address
UNIT 1-3771 NORTH FRASER WAY BURNABY BCV5J 5G5
Country
Canada

View All Listings by this Company

WRAS Approval Number: #2109037

‘Titanium Advanced Oxidisation’ range of UV disinfection units with titanium bodies and EPDM seals. The UV lamps are housed inside synthetic quartz tubes. Maximum working pressure 8.0 bar. Maximum operating temperature 50°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2109037
Expiry date:: 30/09/2026
Size:: Please refer to model.
Marking:: Brightwater, model and other technical information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170
Model:: ¾” BSP to 2” BSP male inlet and outlet: AOP1, AOP5 & AOP10. DN100 to DN150 flanged inlet and outlet: AOP20, AOP50 & AOP100.
Factor:: BrightWater Environmental Ltd

Company Name
BrightWater Environmental Ltd
Address
Redborough Barn, Stalisfield Green, Faversham
Postcode
ME13 0HX
Country
Kent.
General Email
sales@bwater.eu

View All Listings by this Company

WRAS Approval Number: #2109341

Range of UV disinfection units incorporating 316L stainless steel bodies and quartz sleeves. Maximum working pressure 10.0 bar. Maximum operating temperature 35°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2109341
Expiry date:: 30/09/2026
Size:: DN150, DN200, DN250, DN300, DN350 & D400 flanged connections
Marking:: Bio-UV logo, model, date of manufacture (DD/MM/YYYY) and technical information on adhesive label on electrical cabinet. Bio-UV and other technical information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170 R290 R511
Model:: ‘IAM’ range of models: IAM2273 300W IAM4273 300W IAM6273 300W IAM4273 400W IAM6273 400W IAM8323 400W IAM6355 800W IAM8406 800W
Manufacturer:: Bio-UV group

Company Name
Bio-UV group
Address

View All Listings by this Company

WRAS Approval Number: #2204342

Range of UV disinfection units with stainless steel bodies and quartz tube. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2204342
Expiry date:: 30/04/2027
Size:: ¾” to 1½” BSP (M) based on model
Marking:: Daro, serial number and model number on adhesive label on fitting body and control unit
Installation Requirements:: R001 R120 R150 R170 R290
Model:: Saphir1, Saphir1+, Saphir1Pro. Saphir2, Saphir2+, Saphir2Pro. Saphir3, Saphir3+, Saphir3Pro. Saphir4, Saphir4+, Saphir4Pro. Saphir7, Saphir7+, Saphir7Pro. Saphir10, Saphir10+, Saphir10Pro.
Factor:: Daro UV Systems Ltd

Company Name
Daro UV Systems Ltd
Address
Unit 9 Ballingdon Hill Industrial Estate, Sudbury, Suffolk
Postcode
CO10 2DX
Phone
01787370187
General Email
info@darouv.co.uk

View All Listings by this Company

WRAS Approval Number: #2205012

Range of UV disinfection units with stainless steel bodies and EPDM seals. The UV lamps are housed inside quartz tubes. Maximum working pressure 10.3 bar. Maximum operating temperature 40°C.

Section:: 2411 Disinfection Equipment
WRAS Approval Number:: 2205012
Expiry date:: 31/05/2027
Size:: Please refer to model.
Marking:: ‘LUMINOR BLACKCOMB’ and ‘LUMINOR’ logos, model and technical information on adhesive label on body.
Installation Requirements:: R001 R120 R150 R170 R290
Model:: LBx-02X (½” female NPT). LBx-03X & LBx-10X (½” male NPT). LBx-06X (¾” male NPT). LBx-08X, LBx-15X & LBx-20X (1” male NPT). LBHx-05X & LBHx-10X (¾” male NPT). LBHx-15X & LBHx-25X (1” male NPT) LBHx-40X (1½” male NPT inlet and outlet). ‘x’ denotes controller option and can be replaced with: 4 = controller does not support UV sensor, ships with plug as standard. 5 = can accept optional UV sensor, ships with plug as standard. 6 = controller is same as LB5, but the LB6 system ships with UV sensor as standard. ‘X’ denotes power cord and can be replaced with 1, 2, 3 or 4.
Manufacturer:: Luminor Environmental Inc.

Company Name
Luminor Environmental Inc.
Address
80 Southgate Drive, Unit 4, Guelph, ON Guelph
Postcode
N1G 4P5
Country
Canada,

View All Listings by this Company