Range of float operated valves with brass bodies manufactured to BS1212 Part 2 1990. The valves have ½’’ BSP inlets with plastic backnuts, brass or plastic back plates, an up and over type outlet discharge and a brass lever arm. Maximum working pressure 14.0 bar. For use with cold water only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2107901

Expiry date:

31/07/2026

Note:

Not supplied with a float

Size:

see model

Marking:

The words ‘’Beta BS1212 Part 2’’ is embossed onto the brass body The word ‘’BETA’’ is moulded into the overhead discharge nozzle The word ‘’BETA’’ is embossed or moulded into the front face of the backplate.

Installation Requirements:

R001 R550 R554

Model:

DBL201A Side entry ½” BSP 1 ¼” tail - High pressure seat (Brass back plate). DBL201AX Side entry ½” BSP 1 ¼” tail - High pressure seat (Plastic back plate). DBL201B Side entry ½” BSP 2” tail - High pressure seat (Brass back plate). DBL201C Side entry ½” BSP 3” tail - High pressure seat (Brass back plate). DBL251A Side entry ½” BSP 1 ¼” tail - Low pressure seat (Brass back plate). DBL251B Side entry ½” BSP 2” tail - Low pressure seat (Brass back plate). DBL251C Side entry ½” BSP 3” tail - Low pressure seat (Brass back plate). DBL231A Side entry ½” BSP 1 ¼” tail - Medium pressure seat (Brass back plate).

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Address

Dauntless Works, PO Box 28, New Birmingham Road

Postcode

DY1 4SN

Country

Dudley,

View All Listings by this Company

Range of float operated valves with plastic bodies and either brass or plastic inlet tails of the side or bottom entry type manufactured to BS1212 Part 3 1990. The valves have ½’’ BSP inlets with plastic backnuts, an up and over type outlet discharge and a plastic operating lever adjusted by a screw & lock nut. Maximum working pressure 14.0 bar. For cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2107905

Expiry date:

31/07/2026

Note:

Not supplied with a float

Size:

½” BSP side inlet or ½’’ BSP 8” to 10” fixed height pedestal. ½” BSP inlet telescopic (adjustable height 8” to 11½”).

Marking:

The front face of the backplate is marked with the words: ‘’T.DUDLEY BS 1212 PART 3’’ OR ‘’CRONEX BS 1212 PART 3’’ AND ‘’COLD WATER ONLY’’

Installation Requirements:

R001 R280 R550 R554 R560 R562

Proviso:

IRN R560 applies to the bottom entry inlet valves only IRN R562 applies to the telescopic inlet valve only

Model:

Beta+ Side entry (plastic tail). Beta+ Side entry (brass tail). Beta+ 8” to 10” Pedestal (plastic tail). Beta+ Telescopic pedestal (brass tail).

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Address

Dauntless Works, PO Box 28, New Birmingham Road

Postcode

DY1 4SN

Country

Dudley,

View All Listings by this Company

Range of BS1212 Part 3 1990 float operated valves incorporating plastic bodies of either the side or bottom entry type. Maximum working pressure 14.0 bar. For cold water use only.

Section:

2075 Float Operated Inlet Valve

Section Subtitle:

Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.

WRAS Approval Number:

2107908

Expiry date:

31/07/2026

Note:

Not supplied with a float

Size:

½” BSP Side inlet, ½” BSP Pedestal Bottom Inlet, Heights 8” to 10”

Marking:

‘’T.DUDLEY BS 1212 PART 3’’ OR ‘’CRONEX BS 1212 PART 3’’ AND ‘’COLD WATER ONLY’’

Installation Requirements:

R001 R280 R550 R554 R560

Proviso:

IRN R560 applies to the bottom entry inlet valve only

Model:

401, 401E - Side Entry 451, 451E - 8” to 10” Pedestal Bottom Entry

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Address

Dauntless Works, PO Box 28, New Birmingham Road

Postcode

DY1 4SN

Country

Dudley,

View All Listings by this Company